Blasting, Corrosion Control, Cost Control, Painting (Facilities and Maintenance), Rust Programming Language, Systems Maintenance, Team Player
We have an exciting opportunity Painters/Blasters in Norfolk,VA with one of our Clients in the Ship Repair Industry.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- High school diploma or equivalent
- Minimum of seven years experience with accomplishing Corrosion Control and Preservation in the Marine Industry
- Minimum 120 hours of “hands on” experience operating 40K PSI water-jetting equipment.
- Minimum 200 hours of “hands on” experience operating 3500 – 5000 PSI pressure washers for cleaning of ships hulls.
- Minimum of 800 hours of “hands on” experience with Airless Spray paint application and/or Abrasive Blasting and/or Installation and Maintenance of vessel containment systems.
- Must be able to work effectively with others.
- Must be a steady, reliable worker.
- Must be able to comprehend and follow simple instructions
- Prepare all types of surfaces for preservation.
- Removes old paint and debris from all types of substrates by; Scraping, Chipping and Sanding.
- Operate; 3,000 to 5,000PSI Pressure Washers and wash surfaces to remove grease, rust, scale, and dirt.
- Operate 40,000PSI Ultra-High Pressure Water Jetting equipment.
- Mix Solvents and Coatings accurately to formula.
- Apply coatings in accordance with specifications and good marine practice.
- Capable of brush and roll painting for passing all inspection processes
- Be familiar with and exercise proper procedures for; painting in confined spaces.
- Control costs in assigned area of responsibility.
- Complete tasks with little to no supervision
- Other duties may be assigned as workload requirements dictate.
- Understand and act upon simple instruction
- Work independently to complete job assignments
- Must have regular, reliable attendance
TOOL REQUIREMENTS:
- The following tools are expected to be part of the 1st Class Corrosion Control Technician’s, employee provided and maintained toolbox:
- Tool bag or Toolbox
- “5 in 1” Painter’s Tool
- Large Wire Brush
- Flashlight
- 25ft. Tape Measure
- Utility Knife (“Box Cutter”)
- Wire Cutter
- Adjustable wrenches (10” & 12”)
- Flat Tip Screwdrivers
- “Channel-lock” Pliers
HOURS:
- First shift starts at 6AM and Second shift starts at 3PM. May work 8,10 or 12 hours shifts.
PAY:
- Local is up to $28 for 1st Class
- Non-Local is up to $23.00 for 1st Class with $120/Per Diem
I
Integrity Staffing Services