API_TEZT_Chemist2_20260909_CORA.docx
*** | SUPPLEMENTAL LABOR MANAGEMENT OFFICE
ADDITIONAL PROCUREMENT INFORMATION (API)
Title & Level
Chemist 2
Work Group Location
Vancouver, WA
Specialty
N/A
Offsite Work Eligibility*
Situational Telework
Organization
TEZT
Number of Days Onsite
5 days per Week
Hours
Full-Time, up to 40 hours
Additional Information
Enter additional info regarding the offsite work arrangement, if applicable.
Overtime
5% anticipated
On-Call
Yes, May be call to test emergency GIO samples (a few times a year) outside of core hours.
Travel
Up to 10% travel for meetings, trainings, and to field locations. Note: travel to field locations may require Personal Protective Equipment (see below).
FN Status
NOT open to Foreign Nationals
* Current telework, remote work and onsite support is based on BPA s business needs and is subject to change or termination at any time.
** Assignments with the Remote Designation must reside in WA, OR, ID or MT. Case-by-case exceptions may apply only when in the best interest of BPA.
OVERVIEW
Assignment
This full-time contract Chemist Assignment will work alongside *** (BPA) chemists in support of the Diagnostics, Metrology & Labs (TEZT) organization, at the chemistry laboratory, supporting substation maintenance and environmental programs. This Assignment may also be required to perform work at various substations throughout the BPA service area supporting and assisting with environmental cleanup projects.
Organization
The Diagnostics, Metrology & Labs (TEZT) organization provides Field Testing, High Voltage Laboratory, High Current Laboratory, Chemistry Laboratory, Mechanical Laboratory, and Geo-tech Laboratory services. Collectively, these services provide acceptance testing of components, hardware and materials associated with BPA s power transmission system, diagnostic tests for asset health assessment, staged system testing for commissioning new electrical facilities, managing or conducting research and development for improvements in transmission facility equipment. Some services are provided as collaborative efforts with Colleges and Universities, National laboratories, Department of Energy, other researchers, research institutes, and (if available) through reimbursable contracts and agreements with external entities. BPA s chemists provide testing services in support of substation maintenance; includes insulation oil analysis, HazMat waste profile and environmental cleanup. Substation maintenance related testing includes; oil quality, dissolved-gas-analysis, furan analysis and metal particle counts. BPA s environment program requires chemists support in waste profile analysis and reports as well PCB analysis both in liquid (oil) and soil samples.
ASSIGNMENT RESPONSIBILITIES
Note: All official drafts, documents and recommendations, as listed below, must be reviewed, finalized and approved / accepted by appropriate BPA manager or other federal personnel with the authority to do so.
On a progressive basis, working with senior TEZT personnel, support, assist with, and perform the following:
Receive and process test samples; which includes logging samples into the tracking system and provide change of custody to customer.
Perform oil quality tests, dissolved-gas-analysis tests, and PCB tests; analyze results, identify any unknown materials, and issue reports.
Perform Chemical Waste Profile Analysis and Reporting; timely and accurately completed reporting is vital.
Coordinate with field personnel for proper sampling, shipment and/or disposal of waste.
Conduct various specialized tests on transformer insulating oil; e.g., furan, metal particle counts.
Provide consultation on ASTM D27 (Electrical Insulating Liquids and Gases) methods and specifications as it pertains to the power industry.
Provide recommendations on new product purchases for electrical insulating liquids from a chemical perspective.
Perform general laboratory clean-up as well as regular sample containers cleaning.
Repair and maintain laboratory equipment as is practical, escalating maintenance and repair needs as necessary.
Participate in organization improvement efforts, assisting and recommending new or revised procedures, processes or other initiatives to enhance efficiency and quality.
REQUIREMENTS
Education & Corresponding Experience (required on matrix)
Bachelor s degree in Chemistry is required.
5 years of applicable research and/or quality control chemistry experience is required.
Required Technical Skills & Experience (required on matrix)
Must have knowledge of chemistry and testing concepts.
Demonstrated skill performing lab and field tests.
Ability to interpret and apply applicable test standards to test samples.
Preferred Skills & Experience (optional on matrix)
Working knowledge of dissolved-gas-analysis and knowledge of key gases.
Working knowledge of PCB analysis for both liquid and soil samples.
Knowledge of Resource Conservation & Recovery Act (RCRA) Hazardous Waste Regulations 40 CFR Part 261.
Knowledge of US Department of Transportation (DOT) regulations on shipping hazardous wastes.
Proficiency with Microsoft Office Suite products, such as Word, Excel, PowerPoint and Outlook.
Additional Requirements (not required on matrix)
Valid U.S. Driver s License is required.
PPE Requirements
White Hard Hat
Eye Protection
Respirator (must be fit tested and include medical certification allowing use of device)
Footwear: ASTM F 2413-11 with an EH Rating or ASTM F2413-18 with an I/C/EH Rating. Footwear must lace up over the ankle and have a rigid sole and heel. The exterior of the boot must be made entirely of natural materials (all leather or leather and rubber combination) to conform to Arc-Flash requirements.
Additional PPE required by State or Federal OSHA for the work being performed. Refer to Ad-hoc PPE Requirement Appendices.
Training Expectations (Worker is expected to keep current on the latest technologies and skills required for the assignment.)
Training Type
Details
Provided by
APM/Safe Workplace Training
32 hours
BPA
US Dot training as specified under CFR 49 and specifically CFR 49 172.704 (Hazmat)
At least once every three years
Supplier or Worker
Annual RCRA (Resource Conservation & Recovery Act) as specified under 40 CFR part 261
Initial and refresher training as required
Supplier or Worker
Attendance at all conferences, workshops, training, etc. must be pre-approved by SLMO. Requests will be reviewed on a case-by-case basis. Approval is subject to the most current guidance provided to SLMO by BPA or DOE and is subject to change at any time. SLMO reserves the right to negotiate attendance on billable/non-billable hours and reimbursement of travel costs with the supplier. Reimbursable travel costs must adhere to the Federal Travel Regulations and be submitted via an expense sheet in Fieldglass.
CLOSELY ASSOCIATED RESPONSIBILITIES & REQUIRED ASSOCIATED MITIGATION MEASURES
The following is a list of potential inherently governmental risk areas and the measures that SLMO-Compliance has determined must be in place, via processes and procedures, to mitigate the associated risks. The BPA manager s acceptance of the API or CWSD serves as their attestation that all applicable mitigation measures listed below are or will be established and adhered to in their organization.
Area of potential Closely Associated / Inherently Government function
Mitigation Measures
Access to Confidential / Sensitive Information
CFTE must sign NDA (Non-Disclosure Agreements) at beginning of assignments. (Does not apply to Craft assignments)
CFTE must complete annual Information Security and Privacy Awareness training.
CFTE must complete and pass background investigations of an appropriate level.
Acquisition Planning / Source Selection
CFTE are not permitted to serve as voting members for acquisition selections.
All purchasing decisions must be made by appropriate federal personnel (Contracting Officers).
All acquisition documents (requirements,
SOW s, evaluation criteria, etc.) must be reviewed, finalized and approved by appropriate BPA federal personnel.
Only Contracting Officers are authorized to obligate BPA funds.
Agency / Org Planning
All drafts, documents, materials and recommendations must be reviewed, finalized and approved by appropriate BPA federal personnel.
Budget / Finance Prep
Only Federal Employees may determine budget priorities & allocations.
BFTE must control and finalize / approve all budgets and related documentation, including that for projects, programs and Organizations.
Contract Management
All Contractual documents, including invoices must be finalized / approved by appropriate Federal personnel.
All contract-related decisions (modifications, changes, performance) must be determined by appropriate federal personnel (COs).
Decision Making
CFTE may provide input and recommendations to decision-makers.
Only appropriate federal personnel may make decisions which obligate BPA resources or to a specific course of action.
Direction & Control
(directing BFTE)
CFTE are not permitted to direct the actions of federal employees (BFTE) or have any control or input into their performance.
Work of BFTE must be assigned by federal manager, supervisor, Program / Resource manager or another appropriate designee.
Disposing Govt. Property
All decisions regarding the disposal of BPA property must be made by appropriate federal personnel; and all property dispositions must be directed and controlled by the Investment Recovery Center (IRC).
Dissemination of Agency/Policy Information / Training
All training and any information that is to be disseminated must be either 1) per established policy, process, procedure, or practice; or, 2) reviewed, finalized and approved by appropriate BPA federal personnel.
Inspection / IT Testing
Processes and procedures must ensure Federal personnel review inspection findings and CFTE recommendations before acceptance or rejection of material(s) / item(s).
HR Support
CFTE may assist with HR functions per established procedures, processes and guidelines (e.g., timekeeping).
All work products must be reviewed and finalized by appropriate federal employees.
Policy Development
BPA s process for Policy development includes multiple levels of federal review prior to acceptance / adoption.
Interpretation of Policy/Regulations
Only BPA federal employees may determine the applicability and interpretation of regulations.
CFTE are not permitted to interpret regulations for or on behalf of BPA. Regulations are interpreted by federal personnel and communicated via standards, guides, policies and processes.
Representing BPA
Contract workers are required to identify themselves and their employer in signature blocks, in introductions and have a nameplate outside their cubicle.
CFTE must receive written VP approval to represent BPA at outside events, such as workshops, seminars or conferences.
Page 4 of 4 F_0121_API_TEMPLATE_030626
CFTE NON-CRAFT HIRING SAFETY TRAINING MATRIX
CONTRACT FULL TIME EQUIVALENT (CFTE)
NON-CRAFT HIRING SAFETY TRAINING MATRIX
Purpose:
The Contract Full Time Equivalent (CFTE) Hiring Safety Training Matrix is a hazard assessment for CFTE personnel routine tasks. It is intended to set a common understanding on training requirements between the CFTE personnel and the *** (BPA) managers/supervisors. BPA Requesting Managers should complete this form and coordinate with BPA Supplemental Labor Office during the procurement process to ensure the CFTE position includes a list of required trainings associated with identified tasks, conditions, and exposures. Each task, condition, and exposure indicate which training courses are required, who shall provide those trainings, and when those trainings shall occur.
This form is intended only as a reference document for contractors.
BPA Requesting Manager
(Last, First MI)
Khem, Sokom
Date
9/4/2026
CFTE Job Title
Chemist 2
Org
TEZT
PPE provided by Supplier or Contractor?
Yes No
If yes, list required PPE: Full-Face mask, ASTM footwear, safety glasses, Hearing Protection
Identify which Supplier or Contractor medical surveillance programs are required, if any*
Respirator User
Asbestos
Lead
Silica
Hearing Conservation
Other: Click or tap here to enter text.
No Medical Surveillance
*BPA Requesting Managers may use equivalent Job Title Position Hazard Assessments or project Job Hazard Analyses as indicators for which medical surveillance programs may be required. Direct any questions regarding medical surveillance program requirements to the BPA Industrial Hygienist, ***, or ***.
Instructions for BPA Requesting Manager: This template has been pre-populated with tasks and hazards generally associated with CFTE non-craft positions. BPA Requesting Managers must review this document during the CFTE procurement process. The BPA Requesting Manager will:
Select the checkbox next to each task/condition/exposure that may be encountered during the normal course of the assignment.
Identify if the mitigation for applicable tasks/conditions/exposures will be provided by BPA or the Contractor (supplier).
Indicate when the mitigation must occur (pre-hire, post-hire, pre-task).
Pre-Hire Training should be completed prior to the CFTE starting their assignment.
Post-Hire training should be completed prior to exposure to a hazardous environment and/or conducting work at a BPA worksite.
Pre-Task Training should be completed prior to conducting the associated task.
Once complete, the BPA Requesting Manager will send the completed document to the Supplemental Labor Management Office.
The listed tasks, conditions, and exposures are not all inclusive. New processes, unusual tasks, or equipment may trigger the need for specialized training. Consult with your local Safety Manager or BPA Safety Training Manager for guidance.
BPA provided safety training will be the same training provided to Federal Workers.
For the General Comments section, BPA Requesting Managers can list anything that was not already covered and provide clarification to the BPA COR to better understand the CFTE position. It may include tasks, conditions, and/or exposures that are unique to a particular position, work site, or person.
For more information on the PHA process/requirement, reference the Safety and Occupational Health Manual, Safety Management Systems Chapter.
Direct any questions regarding training requirements or issues related to this form to the BPA Safety Training Manager, ***, or ***.
Office & Remote Work/Telework Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Exposed to a fire in the building
BPA manager will advise of evacuation protocol and designated gathering location. Annual fire drills will be conducted.
B
Exposed to an earthquake while in the building
BPA manager will advise of evacuation protocol and designated gathering location.
B
Operating office tools (paper cutter, paper punch, staplers, etc.)
None Identified
B
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Performing tasks that may result in repetitive motion injuries, prolonged sitting and computer use
Optional: SUFS Move Safe (HRMIS 016633)
B
Ergonomics
Recognize the hazards and know when it is appropriate to stretch and take breaks; ensure a proper desk, chair, and equipment adjusted at the appropriate level; ensure proper lighting. Any ergonomic assessment to be provided by the supplier.
C
Performing tasks that may result in slips, trips or falls such as carrying boxes and walking on stairs or slick surfaces
Review SOHM Chapter 9
Choose an item.
Optional: Slips, Trips & Falls Training (HRMIS 015076)
B
Adding electronic devices that were not previously part of the home (monitors, chargers, computing equipment, etc.)
None Identified. On-the-job familiarization (if using BPA-issued equipment).
Choose an item.
Travel / Field Operation Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Driving vehicles on public and/or non-public roads
Review SOHM Chapter 19
Choose an item.
Defensive/Distracted Driving (HRMIS 017057)
B
Worker operates forklifts
Forklift Certification
Choose an item.
Worker operates a fire extinguisher
Fire Extinguisher Use
B
Worker operates hand tools
None Identified
Choose an item.
Worker uses personal protective equipment
Personal Protective Equipment
B
Worker may be exposed to shock and arc-flash hazard
Shock & Arc Flash Awareness
Choose an item.
Shock & Arc Flash Basic
Choose an item.
Shock & Arc Flash Advanced / Refresher
Choose an item.
Worker may contact but will not disturb Asbestos Containing Material (ACM) or Potentially Asbestos Containing Material (PACM) 2
Asbestos Awareness
Choose an item.
Worker required to work in remote areas where bear encounters may take place
Bear Pepper Spray Training
Choose an item.
Worker exposed to rodent and bird droppings1
Biological/Vermin/Hanta Virus
Choose an item.
Worker exposed to hot and/or cold environments
None Identified
Choose an item.
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Worker exposed to chemicals, such as herbicides or pesticides;
Herbicide Cert. Ref. 4-hr
Choose an item.
Herb Certification 8-hr
Choose an item.
Hazardous Communication
Choose an item.
Worker exposed to lead2
Lead Awareness
Choose an item.
Lead Worker Training
Choose an item.
Worker exposed to mercury
None Identified
Choose an item.
Worker exposed to noise2
Hearing Conservation (Initial)
Hearing Conservation (Annual)
B
Worker exposed to silica2
Silica - Awareness
Choose an item.
Worker works at heights higher than 4
Fall Protection, Awareness
Choose an item.
Fall Protection, General
Choose an item.
Fall Protection, Advanced
Choose an item.
Ladder Safety
Choose an item.
Fall Protection, Advanced (TLM)
Choose an item.
Worker is required to take first aid and may be called on to render first aid for: workers on high voltage lines and/or equipment; worker works in remote areas
First Aid/CPR/AED
(Red Cross or AHA Accredited)
Required only if specified in the API
C
Worker performs work alone in remote areas
Wilderness Adv. First Aid
Choose an item.
Worker may prepare, transport or receive hazardous materials
DOT 1: Introduction, Classification, and the Hazardous Materials Table
DOT 2: Packaging, Labeling, Marking, and Placarding
DOT 3: Shipping Papers
DOT 4: Loading and Storage
DOT: Security for Shipment of Hazardous Materials
Hazardous Materials: Shipping Lithium Batteries under DOT Exemptions
DOT Hazardous Material Awareness for the General Hazmat Employee
B
1 BPA workplace manager to review Hantavirus Prevention Procedure 420-240-1 before performing task.
2 These exposures may require enrollment in a Medical Surveillance Program. Ensure page 1 is marked accordingly.
Other Specific Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
SAMPLE: Worker may make infrequent visits to field locations or substations
Worker complete the PPE assessment in the SOHM to determine need for PPE such as hard hat, safety glasses, hearing protection, safety vests, Arc Flash clothing or steel-toed boots.
B
X
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
General Comments
BPA Requesting Manager Comments/Additional Considerations:
Click or tap here to enter text.
F_0139_HIRING_SAFETY_TRAINING_MATRIX_121624