Operations and Maintenance (O&M) Technician

Rayburn Energy Station 2 (RES 2), located in Sherman, TX, is a greenfield fast-start simple-cycle facility under construction. The project will feature ten Siemens SGT-800 combustion turbine-generator units and associated balance-of-plant systems. The site is adjacent to the 750 MW Rayburn Energy Station 1 (RES 1), a combined-cycle facility with two Siemens SGT6-5000F turbines and HRSGs.

Opportunity Summary

The O&M Technician will support the pre-commissioning, startup, and ongoing operations of Rayburn Energy Station 2. During pre-commissioning, this position will assist with equipment inspections, mechanical readiness checks, system testing, and preparations for commercial operations.

Once operational, the O&M Technician will operate, monitor, troubleshoot, and maintain the facility's Siemens SGT-800 combustion turbine-generator units and associated balance-of-plant systems. This role supports safe, reliable, and efficient power generation through routine inspections, preventive maintenance, and compliance with safety and environmental standards.

As O&M Technician, your responsibilities specific to the Pre-Commissioning Phase include:

• Complete required training on Siemens SGT-800 combustion turbines, associated auxiliary equipment, plant operating procedures, safety protocols, and site systems.
• Inspect and assist with equipment assembly verification, alignment checks, functional testing, and mechanical readiness assessments to support commissioning and startup activities.
• Document equipment conditions, inspection findings, testing results, and identified deficiencies to support system turnover, corrective actions, and operational readiness.
• Coordinate with engineering personnel, equipment vendors, contractors, and commissioning teams to support safe and efficient completion of pre-commissioning activities.

Your scope of responsibility as O&M Technician will include the following primary functions:

• Operate Siemens SGT-800 combustion turbine-generator units and associated balance-of-plant systems in accordance with established operating procedures, equipment limitations, and safety requirements.
• Execute equipment startups, shutdowns, operational adjustments, and routine system checks to support safe, reliable, and efficient plant performance.
• Monitor operating parameters, including temperatures, pressures, vibration, fluid levels, and equipment performance, to identify abnormalities and maintain operating reliability.
• Perform preventive and corrective maintenance on turbines, pumps, valves, motors, piping, and auxiliary equipment, including lubrication, adjustments, inspections, and minor component replacements.
• Verify equipment readiness for operation through pre-startup inspections, system checks, equipment configuration reviews, and confirmation of operating conditions.
• Maintain accurate operating logs, inspection records, equipment histories, and maintenance documentation using the plant's computerized maintenance management system (CMMS).
• Investigate abnormal operating conditions, equipment malfunctions, and performance deviations, assisting with troubleshooting, root cause identification, and corrective actions.
• Assist maintenance personnel with equipment repairs, planned outages, inspections, and scheduled maintenance activities to minimize downtime and improve equipment reliability.
• Support Electrical, Instrumentation and Controls (IC&E), and other technical personnel with operational and maintenance activities within established qualifications and assigned responsibilities.
• Follow all plant safety, environmental, and operating procedures, including Lockout/Tagout (LOTO), equipment isolation, hazardous energy control, and applicable regulatory requirements.

Fulfill other tasks as assigned by the O&M Manager and plant management, contributing to the overall efficiency and effectiveness of plant operations.

NAES Safe

Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee’s performance.

Working Relationships

The O&M Technician reports to the O&M Manager and takes general direction from other plant management. Additionally, this position will coordinate with all other plant personnel to ensure safe and reliable plant operations.

Physical Requirements and Working Conditions

Physical requirements include standing for extended periods of time, climbing stairs and ladders, working from elevated platforms and walkways at varying heights, and routinely lifting up to 50 pounds.

Power plant environment that may involve entering confined spaces, crawling through narrow areas, and handling hazardous materials, with exposure to fumes, extreme temperatures, and noise. Work may include high heat near equipment and varying outdoor weather conditions.

Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks/respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions apply in and around the facility.

Fitness for Duty

All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening.

Work Schedule

The O&M Technician follows DuPont’s rotating 12-hour shift schedule, providing 24/7 coverage through a structured rotation of day and night shifts to ensure consistent and reliable plant operation. This position will require extended hours, flexible shifts, weekends, and holidays as needed to support plant operations and business needs and may also require callout availability. Depending on the position, on-call status may or may not apply.

Compensation

This position offers a base pay rate ranging from $38 to $53 per hour, along with eligibility for an annual performance bonus.

Core Qualifications and Skills

• Associate degree in power plant technology, a related technical field, or engineering is preferred. Relevant industry or military experience may be considered in lieu of education.
• Prior experience in power generation, gas turbine operations, industrial maintenance, or a comparable heavy industrial environment involving rotating equipment and mechanical systems.
• Working knowledge of combustion turbine operating principles, auxiliary equipment, plant processes, and safe operating practices, including equipment startups, shutdowns, and routine operational monitoring.
• Hands-on experience inspecting, maintaining, troubleshooting, and repairing mechanical equipment such as pumps, valves, motors, piping systems, and turbine auxiliary components.
• Familiarity with plant instrumentation, control systems, operating parameters, and equipment performance monitoring, with the ability to recognize abnormal conditions and respond appropriately.
• Proficiency in reading and interpreting technical documentation, including equipment manuals, mechanical drawings, P&IDs, schematics, and maintenance instructions, while maintaining accurate operational and maintenance records.
• Understanding of industrial safety standards, including LOTO, hazardous energy control, OSHA requirements, environmental regulations, and established safe work practices.
• Demonstrated ability to work collaboratively with Operations, Maintenance, Engineering, contractors, and equipment vendors to support equipment reliability and operational objectives.
• Strong mechanical aptitude, analytical reasoning, troubleshooting, communication, and problem-solving skills, with the ability to work independently or as part of a team.
• Must possess a valid, unrestricted U.S. driver’s license and ensure it remains in good standing at all times.

About NAES

NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We serve clients across the power generation, oil and gas, and renewable energy sectors throughout North America and internationally, supporting the full life cycle of power generation and other industrial facilities.

NAES is committed to fostering a diverse and inclusive workplace. Employment decisions are based on merit and qualifications, without regard to race, color, religion, national origin, sex, gender identity, sexual orientation, age, disability, military status, USERRA-protected status, or any other characteristic protected by applicable federal, state, or local law.