The QC Fabrication In-process Inspector position reports directly to the QC Fabrication Inspection Supervisor and performs the following in-process inspections in the fabrication department.
Laser Cut and Formed Metal In-process Inspection Responsibilities
- Verifies cut components are free of burrs and sharp edges
- Verifies bent components are bent in the proper orientation by comparing the component to the engineered drawings.
- Signs off on in process inspection checklists validating successful inspections.
Copper Forming and Epoxy Insulation In-Process Inspection Responsibilities
- Verifies all copper hole punching is free from burrs or damaged to copper components.
- Verifies epoxy insulation is free from knicks, burns, cuts or visible damage
- Confirms copper length to engineered drawings.
Welding In-Process Inspection Responsibilities
- Verifies proper fit-up/alignment of laser cut/formed components prior to welding
- Verifies welds on components prior to completed assembly welds
- Confirms components are properly identified with part number labels/engravings
Component Powder Coating In-Process Inspection Responsibilities
- Verifies paint finish does not contain any peeling, bubbling or discoloration using paint color chip(s)
- Verifies correct paint mil thickness
The in-process Inspector will
- Be responsible for utilizing squares and mil thickness gauges to validate component compliance.
- Form fills paperwork to validate inspections completed
- Complete NCRs to ensure nonconforming products are properly addressed and documented.
Requirements
- High school diploma or GED required
- 1–3 years of manufacturing, fabrication, QC, or inspection experience required
- Ability to read engineered drawings and verify part compliance
- Ability to use inspection tools such as squares, rulers, and mil thickness gauges
- Ability to identify fabrication, welding, insulation, and coating defects
- Strong documentation skills, including inspection forms and NCRs
- Strong attention to detail and commitment to quality and safety
Preferred
- 3+ years of in-process inspection experience in a fabrication environment
- Experience with sheet metal, copper forming, welding, epoxy insulation, or powder coating inspection
- Experience with NCR documentation and quality systems
- Familiarity with additional measurement tools such as calipers and micrometers
- Experience in switchgear, electrical manufacturing, or custom industrial fabrication
- Bilingual English/Spanish preferred