Receipt Inspector Supervisor

Job Description:

Receipt Inspector Supervisors shall demonstrate a minimum of 5 years' experience as a Receipt Inspection Supervisor, Quality Assurance Supervisor or Quality Inspection Manager.

Receipt Inspector Supervisors shall also demonstrate experience as proficient machined parts inspectors that meet or exceed the qualifications and experience identified below:

Required Skills and/or Experience:

Typical Trade Tasks The Receipt Inspectors shall demonstrate at least 3 years' experience of performing:

a. Visual, dimensional, and generic material identification inspections

b. Setup and inspections on precision surface plates

c. Setup and inspections on precision surface plates

d. Functional checks (flexure or spring rate tests)

e. Generic material verification using acid spot, magnet, or XRF testing

f. Operation of hardness testers, electronic plating thickness gauges, surface finish analyzers

g. Data entry into computer programs, such as Product Data Reporting and Evaluation Program (PDREP)

Qualifications The Receipt Inspectors shall demonstrate at least 5 years of experience in:

a. Precision measuring

a. Precision measurement and inspection techniques utilizing precision measurement instruments such as (e.g. profilometers, digital height gages, calipers, screw pitch gages, variable thread pitch gages, optical comparator, hardness tester, precision gage blocks, plug gages, and dial indicators).

b. Machined parts inspection

c. Precision testing

d. Documenting results from inspections and precision testing.

e. Minimum 2 years of relevant experience.

a. Inspecting, certification, and control of material to the requirements of NAVSEA Material Control Standard, NAVSEA 0948-LP-045-7010 and System Certification Procedure and Criterial Manual for Deep Submergence Systems, NAVSEA SS800-AG-MAN-010/P-9290, and Requirements Manual for Submarine Fly-By-Wire Ship Control Systems, NAVSEA T9044-AD-MAN-010.

b. Inspection and L1 certification of Marrota and Vacco reducing manifolds

c. Inspection and L1 certification of fasteners to System 21 and 22 gaging requirements

d. Inspection and L1 certification of welding commodities and mill products.

e. Application of MIL-STD-792 marking methods

f. Material identification using acid spot testing, XRF, or LIBBS

f. Trained and certified in OSHA safety regulations.

Degree Requirements:

HS Diploma or equivalent

• Must be a US Citizen
• A security clearance