Welder II or III

NOW HIRING: We are looking for a Welder 2 (more MIG experience) or Welder 3 (expert) to join our team. A Welder is responsible for performing MIG welding, layout, tacking, fabrication and building functions in the manufacture of various products in accordance with product specifications.

Successful completion of internal welding test is mandatory.

Millerbernd Manufacturing Company is an AWS (American Welding Society) Sustaining Company Member.

Job Title: Welder 2 or 3 (based on internal weld test and assessment)

Location: Sauk Rapids, MN

Salary Range: Welder 2: $25.03-$29.46 per hour; Welder 3: $29.76 - 35.33 per hour (Non-Exempt)

(In compliance with Minnesota Pay Transparency Law, this range reflects the anticipated compensation for this role. Actual pay may vary based on experience, education, and other factors.)

Shift Schedule: Friday - Sunday, 5AM-5PM

Shift Differential: +$2.50/hour

As a Welder 2, you will:

• Perform these GMAW welds: butt - V - single bevel and fillet welds on carbon steel

• Produce welds that pass visual inspection

• Can perform necessary repairs that pass adhere to MMC Welding Procedure Specifications (WPS) and CWI inspection requirements

• Demonstrates the ability to weld the above weld joints with either .045 and/or .062 diameter wires

• Read and understand MMC WPS's - select appropriate wire and shielding gas and weld within WPS weld parameters

• Proficient in print reading and understands weld symbols and welding gauges

• Can perform welds using following wire - solid - flux core and metal core as needed.

• Can weld carbon, stainless steel as needed

• Perform carbon arc gouging and recognize when any and all defects have been removed

• Layout and tack to specifications

• Use grinder or other appropriate tools to clean, smooth out, grind or finish parts as needed

• Use various machines to fabricate, build, and design products.

• Monitor the production board and internal paperwork to perform tasks in the designated sequence

• Accurately label all parts for routing to next operation

• Performs prescribed preventative maintenance on machines as required

• Enter job data in production tracking system

• Use crane, hoist, forklift or other material handling equipment to transport materials and product into and out of the work area as required

• Must be AWS GMAW certified

• Welders employed with Millerbernd will have the opportunity to complete all weld certification requirements including AWS certification within 14 days of employment - up to 3 attempts

• Welders employed with Millerbernd Circular Products, Sauk Rapids are required to obtain and maintain ASME certification requirements

• Ensure use of safe work procedures and wear all required PPE

• Perform work at the appropriate pace to maintain quality and productivity requirements

As a Welder 3 you will:

Safety

• Familiar with and complies with all safety requirements and protocols for working in a hazardous environment
• Acts as a resident expert within the team on safety; typically, this role would not incur any safety violations or incidents
• Keep equipment and work area clean and orderly

Quality

• Visually inspects completed welds to determine acceptance to given specifications
• Achieves a UT (ultrasonic testing) pass rate of 85% (calculated over a 6-month period from total number of structures welded)
• Achieves less than 10% visual testing failures (calculated over a 6-month period from total number of structures welded)
• No more than 0.5 inches per earned hour
• Can weld any section with little to no visual defects

Delivery

• Reads, understands and executes Welding Procedure Specifications (WPS); assists less experienced welders with process interpretation
• Cleans and prepares surfaces to be welded
• Joins, fabricates and repairs metal and other weldable material by applying appropriate welding techniques
• Regularly welds on material 3/16" or greater
• Fits (tacks) any size and complexity
• Interprets blueprints, specifications or diagrams to determine appropriate welding process
• Certified to weld on any area of the pole or cylinder/ring as the business requires
• Performs the welding and/or fabrication within the standard time; average productivity 75%
• Works independently through established procedures associated with the job with limited supervision

Leadership

• Assists in the development and training of welding and fabrication employees on safe practices and advanced welding procedures and practices
• Trains other less experienced welders frequently; either in formal welding school or on the job trainer
• Identifies and initiates product/process improvements
• Assists with documenting work processes
• Dutifully upholds the Core Values of the Company
• Other duties as assigned

Role Qualifications as a Welder 2:

• Preferred candidates will have 3 years' experience in metal fabrication/welding experience

• Successful completion of internal welding test is mandatory

• Proficient knowledge in interpreting blueprints, mechanical drawings, and weld symbols

• Ability to operate hoists, cranes, and other powered industrial vehicles as needed

• Ability to operate various power and hand tools

• Experience in use of weld positioners, turners, fixtures and equipment

• Ability to perform basic shop math functions

• Ability to electronically record production information

• Ability to read and understand required internal manufacturing paperwork

• Ability to work with others as part of a high-performance team

• Ability to adapt to changing work priorities

• Able to work under limited supervision using standardized practices and/or procedures

• Accurately use tape measure and precision measuring instruments

• Operational knowledge of Electric Plasma and Acetylene Torch

• Proficient in welding techniques on flat, vertical and rotating planes

Role Qualifications as a Welder 3:

• Welding and fabrication experience preferred
• Demonstrated progressive experience including AWS, ASME, ISO and/or API welder qualifications
• Demonstrate progressive experience working in multiple processes, positions and materials through current or previously held certifications in at least 3 of the following process: FCAW, GMAW, GTAW, SAW, PAW, SMAW
• Prefer graduation from an accredited trade school for welding
• Expert knowledge in interpreting blueprints, mechanical drawings, and weld symbols
• Expert knowledge of weld set up parameters (amps, volts, etc.)
• Expert Knowledge of welding properties of a variety of metals
• Ability to perform basic shop math functions
• Ability to set up work and determine operation sequence
• Ability to recognize and solve practical problems or issues
• Ability to work in a team environment with a diverse group of people
• Ability to pay attention to detail and follow work instructions
• Ability to read and understand required internal manufacturing paperwork
• Able to work under limited supervision using standardized practices and/or procedures

Join Millerbernd Manufacturing - Where Your Career Can Take Shape

About Us: At Millerbernd, we don't just offer jobs-we build careers. We're dedicated to creating meaningful opportunities where you can unlock your potential, turn ideas into action, and be part of a skilled, diverse, and driven team. From day one, you'll experience a supportive and dynamic environment designed to help you grow and succeed.

What We Offer:

Comprehensive Benefits

• Medical, Dental & Vision Insurance - Two medical plan options, with company HSA contributions
• Health & Flexible Spending Accounts (HSA/FSA) - For medical and dependent care expenses
• Life & Disability Insurance - Company-paid basic life, AD&D, and short-/long-term disability
• Voluntary Benefits - Including optional life, legal & ID protection, accident & critical illness insurance

Financial Security

• 401(k) with 4% Match - Immediate vesting
• Incentive Pay - Performance-based bonus programs depending on your role and shift
• Certain roles are eligible for the Performance-based "Freight Train Profit Sharing (FTPS)" Incentive plans
• This team incentive plan has a weekly goal and a weekly stretch goal
• If goals are achieved, the monthly payout can be up to $1,000 per eligible employee

Work-Life Balance

• Accrual Paid Time Off (PTO) + Paid Holidays
• Tuition Reimbursement - Up to $5,250/year for job-related education
• Employee Assistance Program (EAP) - Free, confidential support services
• Onsite Training - Includes leadership, welding, and language courses
• Uniform Subsidy - For eligible roles

Benefits available to employees working 30+ hours/week. 401(k) available to all employees.

What to Expect from the Hiring Process

• Submit Your Application - Our internal Talent Acquisition Team personally reviews every application
• Phone Interview - If your background aligns with the role, we'll reach out for an introductory call
• Onsite Interview & Facility Tour - Get a firsthand look at what it's like to work at Millerbernd
• Follow-Up & Offer - Stay informed throughout the process; most decisions are made within 3-10 business days

We're an Equal Opportunity Employer

Millerbernd Manufacturing Company is committed to fostering a diverse and inclusive workplace. We encourage individuals of all backgrounds to apply.

Applicants must be authorized to work in the U.S. We are unable to sponsor or assume sponsorship of employment visas at this time.

Ready to shape your future with us?

Apply today and discover what's possible at Millerbernd.

#LI-DNI