NDE Level II Inspector (Starship Mechanisms) - Split Shift SpaceXNDE Level II Inspector (Starship Mechanisms) - Split ShiftHawthorne, CA$25–$35 / hourNondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), or ultrasonic shear wave (UTSW); OR 3+ years of inspection experience in an aerospace, aviation, military or a precision machined parts manufacturing environment OR completion of a certified NDE/NDT school or course. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NDE Level II Inspector (Starship Mechanisms) SpaceXNDE Level II Inspector (Starship Mechanisms)Hawthorne, CA$25–$35 / hourNondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), or ultrasonic shear wave (UTSW); OR 3+ years of inspection experience in an aerospace, aviation, military or a precision machined parts manufacturing environment OR completion of a certified NDE/NDT school or course. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Tooling Inspector (Starship) - Level 4/5 SpaceXTooling Inspector (Starship) - Level 4/5Hawthorne, CA$40–$49 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Tooling Inspector (Starship) - Level 4/5 Space Exploration TechnologiesTooling Inspector (Starship) - Level 4/5Hawthorne, CA$40–$49 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
NewNDE Level II Inspector (Starship Mechanisms) Space Exploration TechnologiesNDE Level II Inspector (Starship Mechanisms)Hawthorne, CA$25–$35 / hourNondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), or ultrasonic shear wave (UTSW); OR 3+ years of inspection experience in an aerospace, aviation, military or a precision machined parts manufacturing environment OR completion of a certified NDE/NDT school or course. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewNDE Level II Inspector (Starship Mechanisms) - Split Shift Space Exploration TechnologiesNDE Level II Inspector (Starship Mechanisms) - Split ShiftHawthorne, CA$25–$35 / hourNondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), or ultrasonic shear wave (UTSW); OR 3+ years of inspection experience in an aerospace, aviation, military or a precision machined parts manufacturing environment OR completion of a certified NDE/NDT school or course. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Quality Inspector - Returns Cosmo AppliancesQuality Inspector - ReturnsChino, CAFull timeInspect, test, repair and organize returned kitchen appliances, checking for quality and condition of returned appliances and product; Assist in consolidation and storing process of product that has been received into specific designated locations. Take detailed damage pictures and entering damage notes in internal computer systems or writing on paperwork (such as item conditions using our internal grading system, customer’s return reasons, order reference numbers).
Quality Inspector, Aerospace Precision Machined Metals (GD&T + AS9102 + Faro/Leica) Pave TalentQuality Inspector, Aerospace Precision Machined Metals (GD&T + AS9102 + Faro/Leica)Torrance, CaliforniaThis is a mature, stable operation with a real quality culture, working to tight tolerances on parts where getting it right actually matters. If you know your way around a granite table, a height gauge, and an AS9102 report, and you take pride in being the last set of eyes before a part ships, this one is worth a look.
Senior Electric System Inspector Southern California EdisonSenior Electric System InspectorFontana, CAMust successfully pass the SCE required training program within one year of hire date, minimum of 600 inspections with a QC rating of 95% or higher within one year of hire date, and successful Drone pilot certification within two test attempts as a condition of continued employment. + Identify General Orders 95 and 128 infractions, safety deficiencies, environmental and reliability hazards and wood pole integrity to ensure compliance with all federal and state rules and regulations and company requirements.
Composites Quality Inspector Swift EngineeringComposites Quality InspectorSan Clemente, CaliforniaFamily Planning & Parenting Support: Fertility (eg, IVF, preservation), adoption, and gestational carrier coverage with additional benefits and resources to provide support from planning to parenting. The inspector works closely with production, engineering, and quality teams to identify non-conformances and support continuous improvement initiatives.
Quality Control Inspector FlexQuality Control InspectorFontana, California$19.06–$25.73 / hourCrown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). Report to the Production Manager, Quality Control Inspector, responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products.
Quality Control Inspector Boeing EnCore Interiors, LLCQuality Control InspectorHuntington Beach, CAFull timeSUMMARY OF JOB DUTIES Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Interpret engineering data such as drawings and specifications Competent in using measuring equipment such as calipers, micrometers, height gages, indicators. We offer customizable, pre-certified components and lightweight seating for new aircraft and retrofits, including full interior solutions like galleys, lavatories, and seats designed for the Boeing 737 Sky Interior.
Quality Inspector CCS INCQuality InspectorAnaheim, CAFull timeManual inspections to identify surface defects using micrometres, callipers, height gauges, and optical comparators. Responsibilities: Perform dimensional and visual inspections of machined components, assemblies, and finished products.
NewPasadena, CA - Loss Control Field Inspector – Independent Contractor Associated Services InspectionsPasadena, CA - Loss Control Field Inspector – Independent ContractorPasadena, CA$70–$75 / hourASI's inspection professionals serve a wide range of property types, including commercial buildings, residential properties, and farm & ranch operations , offering thorough assessments supported by high‑resolution images and clear reporting. Associated Services Inspections, Ltd. is a premier commercial and residential inspection company that has provided honest, trusted, and highly detailed inspection services since 1981 .
NewGlendale, CA - Loss Control Field Inspector – Independent Contractor Associated Services InspectionsGlendale, CA - Loss Control Field Inspector – Independent ContractorGlendale, CA$70–$75 / hourASI's inspection professionals serve a wide range of property types, including commercial buildings, residential properties, and farm & ranch operations , offering thorough assessments supported by high‑resolution images and clear reporting. Associated Services Inspections, Ltd. is a premier commercial and residential inspection company that has provided honest, trusted, and highly detailed inspection services since 1981 .
NewHollywood, CA - Loss Control Field Inspector – Independent Contractor Associated Services InspectionsHollywood, CA - Loss Control Field Inspector – Independent ContractorHollywood, CA$70–$75 / hourASI's inspection professionals serve a wide range of property types, including commercial buildings, residential properties, and farm & ranch operations , offering thorough assessments supported by high‑resolution images and clear reporting. Associated Services Inspections, Ltd. is a premier commercial and residential inspection company that has provided honest, trusted, and highly detailed inspection services since 1981 .
Quality Control Inspector Ultimate Staffing ServicesQuality Control InspectorCerritos, California$26 / hourThe ideal candidate will have experience in aerospace, automotive, machining, defense, or other precision manufacturing environments. We are seeking an experienced Quality Control Inspector to join our growing manufacturing team.
Quality Control Inspector KORE1 TechnologiesQuality Control InspectorIrvine, CA$26–$28 / hourReviews supplier-provided documentation to determine compliance with specifications and drawings; maintains accurate and complete records for each part, including the Receiving Inspection (RI) log; completes, scans, and files RI quality records; and ensures status is updated electronically in the Enterprise Resource Planning system. * A minimum of 1-3 years' experience working in a regulated environment, medical device or pharma/biotech quality management system (i.e., ISO 13485, ISO 14971, FDA 21 CFR Part 820) is preferred.
NewQuality Control Inspector II Delta Faucet CompanyQuality Control Inspector IISanta Ana, CA$18.65–$25.03 / hourE-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. Brasstech, a subsidiary of the Fortune 500 Masco Corporation, is a leading manufacturer of decorative high-end plumbing fixtures.
Inspector - Corona, California Hartford Steam Boiler Inspection and Insurance CompanyInspector - Corona, CaliforniaCorona, CARemote2 year's experience associated with the pressure equipment industry as outlined in NB-263, RCI-1 and Completion of an accredited military/merchant marine training program or associated certification program (including CWI, Boiler Maker, Power Engineering, API Inspector). As the world’s largest ASME Authorized Inspection Agency, GIES Inspectors are instrumental in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, field assembled or erected and/or repaired.