UNKNOWN

FEED

Has a thorough understanding of blasting techniques: blast design, loading holes, select and operate electric and non-electric detonators, demonstrate grade & elevation readings, secure blast site, identify explosives, demonstrate pop shooting . Must hold a valid CDL with hazmat endorsement and is a Company-qualified driver (able to transport explosives across state lines) and has a good driving record as defined by the Company insurance carrier .

Come work with the best! At Maine Drilling & Blasting we work with the unity of family and the determination of business owners. As a majority Employee Owned company we provide a unique and generous array of benefits including two retirement plans, an Employer-contributed Stock Ownership Plan (ESOP) and company matched 401(k). In addition to health, dental, vision, life, and disability benefits, we also offer training and development opportunities. The sky is the limit, come rock your career at MD&B! Our core values of Respect, Fairness, Honesty, and Responsibility provide a firm cultural foundation as we relate to customers and each other as we Make it Happen! LICENSED BLASTER- Performs blasting activity in accordance with job program to achieve anticipated production. This position supports the direction of the Blasting Supervisor and Project Superintendent. Reports blasting results and status to Project Superintendent or Blasting Supervisor for input and direction. Responsibilities: <ul><li>Performs assigned blasting activities. </li><li>Works as a job site blaster and receives direction from Blasting Supervisor and/or Project Superintendent </li><li>Provides input on blast-related activities to aid direct supervisor in plans </li><li>Identifies blast site problems and resolves with Blasting Supervisor or Project Superintendent, if necessary </li><li>Verifies that pre-blast inspections have been conducted prior to blasting </li><li>Performs all necessary pre-blast tests and seismograph setup as needed </li><li>Understands and follows all Company safety policies and practices </li><li>Places supply and material requests through Blasting Supervisor or Project Superintendent as needed </li><li>Monitors the relationship between blast pattern and type of digging and reports results to Blasting Supervisor or Project Superintendent </li><li>Documents use of explosives and completes required inventory paperwork </li><li>Expected to transport explosives across state lines, as needed </li><li>Is responsible for completing field accounting reports and required trip manifest forms as needed </li><li>All other duties as assigned </li><li>Attends company meetings as required </li><li>Participates in daily heads up safety meetings </li></ul>Qualifications<ul><li>High School Degree </li><li>Minimum of two years experience working with drills and explosives </li><li>Must have completed Blaster I training and will be required to take Blaster II training </li><li>Possess a Valid Blasting Certificate in states that require this </li><li>Must have good communications skills </li><li>Must hold a valid CDL with hazmat endorsement and is a Company-qualified driver (able to transport explosives across state lines) and has a good driving record as defined by the Company insurance carrier </li><li>Out of town/state travel </li><li>Must successfully pass a criminal background check with ATF </li><li>Has a thorough understanding of blasting techniques: blast design, loading holes, select and operate electric and non-electric detonators, demonstrate grade & elevation readings, secure blast site, identify explosives, demonstrate pop shooting </li><li>Proficient in all areas of drill operations </li></ul>Physical Requirements<ul><li>Ability to perform essential functions of the position </li><li>Ability to lift 50 lbs., 30 - 40% of the time </li><li>Work on uneven and loose surfaces in varying weather environments </li><li>Stooping and bending 30 - 40% of the time </li></ul>Skeptical about advancement opportunities? Check out these videos:<ul><li>Dante (CST) talks about what it's like to work at MD&B: </li><li>Dan (CEO) talks about career advancement opportunities:</li></ul> Does this sound like you? If it does, then go ahead and hit that APPLY button because we cannot wait to meet you! Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

MDB Group, LLC

Licensed Blaster (Construction)

Blasting

CDL Driver's License

Communication Skills

Construction

Drill and Blast

Drilling

Driver's License

Explosives

Financial Reporting

Hazardous Materials/Substances

Identify Issues

Insurance

Lift/Move 50 Pounds

Mine Reports

Mine Security

Physical Demands

Problem Solving Skills

Safety/Work Safety

Secondary School

Seismograph

Training/Teaching

Truck Driver

Hire Recruits

TOOL REQUIREMENTS:The following tools are expected to be part of the 1st Class Corrosion Control Technician’s, employee provided and maintained toolbox:Tool bag or Toolbox. Minimum 200 hours of “hands on” experience operating 3500 – 5000 PSI pressure washers for cleaning of ships hulls.

<div>We have an exciting opportunity Painters/Blasters in Norfolk,VA with one of our Clients in the Ship Repair Industry.</div><div> </div><div>ESSENTIAL DUTIES AND RESPONSIBILITIES:</div><ul><li>High school diploma or equivalent</li><li>Minimum of seven years experience with accomplishing Corrosion Control and Preservation in the Marine Industry</li><li>Minimum 120 hours of “hands on” experience operating 40K PSI water-jetting equipment.</li><li>Minimum 200 hours of “hands on” experience operating 3500 – 5000 PSI pressure washers for cleaning of ships hulls.</li><li>Minimum of 800 hours of “hands on” experience with Airless Spray paint application and/or Abrasive Blasting and/or Installation and Maintenance of vessel containment systems.</li><li>Must be able to work effectively with others.</li><li>Must be a steady, reliable worker.</li><li>Must be able to comprehend and follow simple instructions</li><li>Prepare all types of surfaces for preservation.</li><li>Removes old paint and debris from all types of substrates by; Scraping, Chipping and Sanding.</li><li>Operate; 3,000 to 5,000PSI Pressure Washers and wash surfaces to remove grease, rust, scale, and dirt.</li><li>Operate 40,000PSI Ultra-High Pressure Water Jetting equipment.</li><li>Mix Solvents and Coatings accurately to formula.</li><li>Apply coatings in accordance with specifications and good marine practice.</li><li>Capable of brush and roll painting for passing all inspection processes</li><li>Be familiar with and exercise proper procedures for; painting in confined spaces.</li><li>Control costs in assigned area of responsibility.</li><li>Complete tasks with little to no supervision</li><li>Other duties may be assigned as workload requirements dictate.</li><li>Understand and act upon simple instruction</li><li>Work independently to complete job assignments</li><li>Must have regular, reliable attendance</li></ul><div>TOOL REQUIREMENTS:</div><ul><li>The following tools are expected to be part of the 1st Class Corrosion Control Technician’s, employee provided and maintained toolbox:<ul><li>Tool bag or Toolbox</li><li>“5 in 1” Painter’s Tool</li><li>Large Wire Brush</li><li>Flashlight</li><li>25ft. Tape Measure</li><li>Utility Knife (“Box Cutter”)</li><li>Wire Cutter</li><li>Adjustable wrenches (10” & 12”)</li><li>Flat Tip Screwdrivers</li><li>“Channel-lock” Pliers</li></ul></li></ul><div>HOURS:</div><ul><li>First shift starts at 6AM and Second shift starts at 3PM.  May work 8,10 or 12 hours shifts. </li></ul><div>PAY:</div><ul><li>Local is up to $28 for 1st Class</li><li>Non-Local is up to $23.00 for 1st Class with $120/Per Diem</li></ul>

Integrity Staffing Services

Blaster/Spray

Corrosion Control

Cost Control

Painting (Facilities and Maintenance)

Rust Programming Language

Systems Maintenance

Team Player

HaleyMarketing

Advanced safety knowledge to include proper PPE selection, the safe handling, use, disposal, and storage of media, confined space entry, Lock-out/Tag-out procedures. Work in various environments, including but not limited to confined spaces, elevated staging, & manlifts.

Basic Duties and Responsibilities (include, but are not limited to, the following): <ul><li>Operate 3K-5K PSI pressure washers.</li><li>Prepare all types of surfaces for preservation.</li><li>Select proper media to obtain desired surface preparation requirements.</li><li>Operate various style blasting units.</li><li>Proper use and selection of various types of hand and power tools for surface preparation.</li><li>Complete tasks with little or no supervision.</li><li>Follow and act on instructions/tasks given.</li><li>Work independently to accomplish tasks.</li><li>Work with others, as a team, to accomplish tasks.</li><li>Control costs in their assigned area of responsibility.</li><li>Work in various environments, including but not limited to confined spaces, elevated staging, & manlifts.</li></ul>Experience & Skill:<ul><li>Knowledge of the various SSPC surface preparation standards.</li><li>Knowledge of OSHA Shipyard industry standards.</li><li>Advanced knowledge of the selection and uses of various types and sizes of media.</li><li>Advanced knowledge of the set-up, operation, & troubleshooting of the various preservation tools and equipment.</li><li>Advanced safety knowledge to include proper PPE selection, the safe handling, use, disposal, and storage of media, confined space entry, Lock-out/Tag-out procedures.</li><li>Advanced knowledge of NAVSEA, USCG, & Dept. of the Army preservation requirements.</li><li>Knowledge of various inspection/checkpoint requirements.</li><li>Knowledge of manufacturer's product data sheets and SDS.</li><li>Knowledge of DEQ & EPA requirements.</li><li>Knowledge of work specifications.</li></ul>Requirements:<ul><li>A minimum of 5 years' experience in the marine preservation industry.</li><li>Possess a valid C7 certification.</li><li>Reliable transportation and attendance.</li><li>Local travel as needed.</li></ul>Required tools:<ul><li>10"-12" adjustable wrenches</li><li>Scraper</li><li>Flashlight</li><li>Wire cutters</li><li>Flat head screwdriver</li><li>Channel locks</li><li>Utility knife</li><li>Inspection mirror</li></ul> Fairlead Integrated, LLC. and its subsidiaries are proud to be Equal Employ Opportunity and Affirmative Action employers (Minority / Female / Disability / Veterans). To apply for this position, go here: Employment Application - Fairlead Integrated

Fairlead, LLC

1st class Blaster ID: 669

Affirmative Action

Environmental Protection Agency (EPA)

Hand Tools

Industry Standards

Media Placement

Naval Sea Systems Command (NAVSEA)

OSHA

Product Data Sheet

Surface Preparation and Characterization

United States Coast Guard (USCG)

Willing to Travel

IRecruitee

HOUR

Familiarity with marine-grade paints, including the interpretation of safety data sheets (SDS) and NAVSEA 718 product data sheets. Avail Staffing is seeking AAMP Certified Spray Painter/Blaster Technicians (C12 or C14) to join our dynamic team.

Avail Staffing is seeking AAMP Certified Spray Painter/Blaster Technicians (C12 or C14) to join our dynamic team.  As a AAMP Certified Sprayer/Blaster Technician, your role will include:Responsibilities & Requirements:-Proficient in mixing and applying epoxy and enamel paints according to specifications -Ability to read and interpret job specifications to ensure proper completion of tasks -Capable of completing assigned tasks within specified timeframes without on-site supervision -Understanding of paint induction times and familiarity with spray painting or gas-free pumping procedures -Knowledge of the differences between critical and non-critical coating systems -Familiarity with marine-grade paints, including the interpretation of safety data sheets (SDS) and NAVSEA 718 product data sheets -Must hold SSPC certification in preservation (C12 or C14) -Comprehensive understanding of surface preparation standards, including SSPC-SP-1, SP-2, SP-3, SP-5, SP-6, SP-10, SP-11, and SP-12 -Skilled in operating power tools commonly used for surface preparation and paint removal -Knowledge of NAVSEA 009-32 standard item requirements -Familiarity with power tool cleaning techniques -Capable of performing work in confined spaces while adhering to safety protocols -Minimum of two (2) years of shipboard experience in a similar role with Journeyman-Level ProficiencyRequired Certifications/Qualifications:-OSHA-10 Maritime Training -C-12 Airless Spray/C-14 Plural Component CertificationsThis role provides a chance to work on a variety of projects while enhancing your expertise in surface preparation methods. If you have experience in construction-related industries and thrive in a hands-on environment, we invite you to apply for this rewarding opportunity.

Blaster Jobs in Virginia

Resume Resources

Get noticed by top employers!

Blaster Jobs in Virginia

Licensed Blaster (Construction) MDB Group, LLC

Blaster/Spray Integrity Staffing Services

1st class Blaster ID: 669 Fairlead, LLC

C12 or C14 Spray Painter Avail Staffing Company

Resume Resources