Production Machinist (Starlink) - 2Nd Shift Space Exploration TechnologiesProduction Machinist (Starlink) - 2Nd ShiftWoodinville, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron level tolerance machined parts at production volumes.
Receiving Specialist (Starlink) - 2nd Shift SpaceXReceiving Specialist (Starlink) - 2nd ShiftWoodinville, WA$22–$24 / hourITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RECEIVING SPECIALIST (STARLINK) - 2ND SHIFT Starlink is the world's first and largest satellite constellation using a low Earth orbit to deliver broadband internet capable of supporting streaming, online gaming, video calls and more.
NewStarlink Aviation Integration Technician Space Exploration TechnologiesStarlink Aviation Integration TechnicianWoodinville, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As an Integration Technician, you will be responsible for performing a wide range of tasks, including hardware assembly, testing, integration, and repair of Starlink Enterprise/Aviation products.
Maintenance Technician (Starlink) - Level 4/5 Space Exploration TechnologiesMaintenance Technician (Starlink) - Level 4/5Redmond, WA$46–$54 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Millwright skills and abilities and industrial multi-craft and mechanical trades, able to read tooling drawings and setup a lathe, mill, surface grinding operations safely, basic understanding of tooling modification and repairs.
Machine Maintenance Technician SpaceXMachine Maintenance TechnicianRedmond, WA$31–$36 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Provide maintenance on various equipment: vacuum chambers, thermal chambers, CNC machines, production automation and controls equipment, tooling fixtures, and other industrial machinery.
Starlink Production Technician - Entry Level Space Exploration TechnologiesStarlink Production Technician - Entry LevelRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment.
NewStarlink Assembly Technician SpaceXStarlink Assembly TechnicianRedmond, WA$22–$26.50 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment.
Product and Service Quality Manager The Boeing CoProduct and Service Quality ManagerEverett, WA$119,850–$162,150 / yearBasic Qualifications (Required Skills/Experience): Candidates must have at least one year of experience in a leadership role (team leader, temp manager, large scale cross functional project/program management, or formal manager experience) OR have completed the Boeing internal course "Exploring Leadership". The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Aerospace Manufacturing - Paint Prepper I - 2nd Shift Sekisui Chemical LtdAerospace Manufacturing - Paint Prepper I - 2nd ShiftRenton, WA$24.88–$28.88 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Aerospace Assembler I - 2nd Shift Sekisui Chemical LtdAerospace Assembler I - 2nd ShiftRenton, WA$24.88–$28.88 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Senior Associate, ECC Contracts KPMG LLPSenior Associate, ECC ContractsSeattle, WAFull timeExcellent verbal and written communication, reading comprehension, and critical thinking skills with ability to effectively interact with individuals at all levels of responsibility and authority; capability to excel in a dynamic, customer service-oriented environment; ability to multi-task and seek assistance from supervisors while prioritizing work to meet deadlines; strong research, project management, and business analysis skills; proficient in Microsoft Tools; particularly Microsoft Word, PowerPoint, Visio, Excel (Pivot Tables, VLOOKUP, Graphs, Macros), Project. Work collaboratively with various stakeholders and draft contracts related documents for review by Contract Managers and Office of General Counsel; interface with all levels of the delivery teams, functional support organizations, and client organizations; act as point of contact for internal and external clients including obtaining satisfaction feedback.
Industrial Maintenance Technician (Starlink) - 2Nd Shift Space Exploration TechnologiesIndustrial Maintenance Technician (Starlink) - 2Nd ShiftRedmond, WA$23–$29 / hourThe Industrial Maintenance Technician at SpaceX works in a fast-paced environment that will oversee the installation and maintenance of our heavy industrial equipment such as cranes, compressed air systems, and overhead doors by third-party contractors to support the production of Starlink. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Specialist - 2Nd Shift Space Exploration TechnologiesManufacturing Specialist - 2Nd ShiftRedmond, WA$34–$40 / hourJoin the Starlink printed circuit board assembly (PCBA) team and take ownership of Surface Mount Technology (SMT) processes that enable the high-volume production of electronics designed for spaceflight. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Lead Technician, Dopey (Starlink) - 2nd shift SpaceXLead Technician, Dopey (Starlink) - 2nd shiftRedmond, WA$25.50–$31 / hourRESPONSIBILITIES: + Lead satellite production team to achieve daily production targets involving mechanical integration and test execution according to work orders + Assist with the development of production processes, and identify continuous improvements to reliably achieve production targets + Build small electrical sub-assemblies + Mechanical/electrical assembly of satellite components, subassemblies, and integration of final vehicle assemblies + Mechanical/electrical assembly of PCB assemblies into product chassis + Build-up battery cell modules + Build solar modules and solar arrays + Wire harnessing + Solder and de-solder through-hole and SMT components + Support conformal coat, masking, epoxy application and coating + Run functional testing of built hardware, including setup, instrumentation, test execution, and teardown + Operate complex automated equipment, including troubleshooting and maintenance + Support the development of prototype test capabilities for spacecraft component development and life tests + Assist in the identification, installation and implementation of test equipment, instrumentation and data acquisition systems + Ensure lab equipment is maintained and calibrated, track calibration schedules + Responsible for some preventative maintenance activities on test equipment and data acquisition systems + Identify test equipment requirements for planned tests, maintain test consumables inventory, and develop test procedures and processes accordingly + Perform test setups as needed to support developments across several test regimes - thermal, shock, thermal vacuum, vibration + Manage schedule priorities and independently executing work to meet company deliverables BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months as a SpaceX Technician or 1+ years of experience in an outside aerospace production environment PREFERRED SKILLS AND EXPERIENCE: + 2+ years of experience in electro-mechanical assembly, integration or mechanical assembly experience + Associate degree + Airframe and Powerplant (A&P) license + Demonstrated ability to read, interpret and work from drawings, controlled documentation and processes such as: layout drawings, mechanical drawings, assembly procedures/work instructions; schematics, engineering drawings, and parts list + Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite + Excellent communication and organizational skills + Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company + Experience with electrical wiring + IPC and/or J-STD certification + Electro-mechanical assembly and prototype development experience + Experience setting up and running tests and experiments + Soldering experience ADDITIONAL REQUIREMENTS: + Willing to work all shifts, overtime and weekends as needed. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Production Machinist (Starlink) - 2nd Shift SpaceXProduction Machinist (Starlink) - 2nd ShiftWoodinville, WA$23–$29 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron level tolerance machined parts at production volumes.
Receiving Inspector (Starlink) - 2nd Shift SpaceXReceiving Inspector (Starlink) - 2nd ShiftWoodinville, WA$22–$26.50 / hourWe provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Specialist (Satellite Transceiver) - 2Nd Shift Space Exploration TechnologiesManufacturing Specialist (Satellite Transceiver) - 2Nd ShiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Production Machinist (Starlink) - 2nd Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 2nd Shift - Level 4/5Woodinville, WA$38–$45 / hourAs a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Test Specialist (Starlink) - 2Nd Shift Space Exploration TechnologiesTest Specialist (Starlink) - 2Nd ShiftRedmond, WA$34–$40 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Test Specialist (Starlink) - 2nd Shift SpaceXTest Specialist (Starlink) - 2nd ShiftRedmond, WA$34–$40 / hourThis role will be covering 2nd shift (typical start time is 4pm) + Must be able to stand for long periods of time + Must be able to lift up to 25 pounds unassisted + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay Range: Level 1: $34.00 - $40.00 Level 2: $38.00 - $45.00 Level 3: $42.00 - $51.00 ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.