SeniorPrincipal Structural Analyst Zeno PowerSeniorPrincipal Structural AnalystSeattle, WA$145,000–$185,000 / yearIn this role you will: Perform detailed mechanical and structural analyses of Radioisotope Power System (RPS) structures, subsystems, and components across all program phases-from early concept and prototype to qualification and flight hardware. Zeno is seeking a highly motivated Senior/Principal Structural Analyst to support the mission-oriented efforts of developing and bringing to market Radioisotope Power Systems (RPS) technologies.
Electrical Engineer II Karman Holdings IncElectrical Engineer IIMukilteo, WAKarman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies' core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.
Electrical Hardware Engineer, Satellites Starlink Space Exploration Technologies CorpElectrical Hardware Engineer, Satellites StarlinkRedmond, WA$105,000–$122,500 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
Hardware Engineer - Electrical, Satellites Starlink Space Exploration Technologies CorpHardware Engineer - Electrical, Satellites StarlinkRedmond, WA$105,000–$122,500 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
Power Electronics Engineer - High Voltage Starlink Space Exploration Technologies CorpPower Electronics Engineer - High Voltage StarlinkRedmond, WAThe traveling wave tube amplifier (TWTA) team is revolutionizing RF vacuum electronics to power the future of space communications with SpaceX gateways by building hardware an order of magnitude faster than traditional industry and an order of magnitude more cost-effective. From concept to deployment, you''ll own the full hardware lifecycle-prototyping, testing, integration, and iteration-while collaborating closely with experts across RF engineering, mechanical design, systems integration, manufacturing, and more.
DFX Manufacturing Engineer Fortive CorporationDFX Manufacturing EngineerEverett, WA$101,200–$169,050 / yearThe DFX Manufacturing Engineer is responsible for driving Design for Excellence (DFX) across new product introductions (NPI) and sustaining products to ensure scalable, cost-effective, and high-quality manufacturing outcomes. This individual serves as a key technical leader within the operations engineering team, owning manufacturing readiness, process capability, and continuous improvement initiatives aligned with Fortive Business System (FBS) principles.
Sr. Power Electronics Engineer - Traveling Wave Tube Amplifier Starlink Space Exploration Technologies CorpSr. Power Electronics Engineer - Traveling Wave Tube Amplifier StarlinkRedmond, WA$135,000–$205,000 / yearThe traveling wave tube amplifier (TWTA) team is revolutionizing RF vacuum electronics to power the future of space communications with SpaceX gateways by building hardware an order of magnitude faster than traditional industry and an order of magnitude more cost-effective. From concept to deployment, you'll own the full hardware lifecycle-prototyping, testing, integration, and iteration-while collaborating closely with experts across RF engineering, mechanical design, systems integration, manufacturing, and more.
Production Recruiting Lead, Connected Warfare ANDURIL INDUSTRIESProduction Recruiting Lead, Connected WarfareSeattle, WA$70–$80 / hourTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Collaborate closely with the talent acquisition team, hiring managers, and senior leadership to shape recruitment strategy, guide process improvements, and drive high-impact, complex hiring projects.
HVAC Technician - Level 4/5 Starlink Space Exploration Technologies CorpHVAC Technician - Level 4/5 StarlinkWoodinville, WA$38–$45 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Leveraging advanced satellites and user hardware coupled with our deep experience with both spacecraft and on-orbit operations, Starlink delivers high-speed, low-latency internet to users all over the world.
Senior Fluid Systems Engineer, Propulsion, Amazon Leo Amazon.com IncSenior Fluid Systems Engineer, Propulsion, Amazon LeoRedmond, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. As a mechanical engineer within the propulsion team you will own the end-to-end lifecycle of propulsion hardware from first-principles concept through high-volume production and on-orbit operation.
Sr PCB Layout Engineer, Amazon Leo Amazon.com IncSr PCB Layout Engineer, Amazon LeoRedmond, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. You must bring a combination of PCB design, fabrication, assembly, and test knowledge to a highly collaborative cross team functional team.
Mid-Level Structural Engineer Schnabel EngineeringMid-Level Structural EngineerSeattle, Washington5+ years of relevant work experience in civil engineering; work may consist of geotechnical analysis and design, geologic engineering, engineering geology, or hydrologic/hydraulic analyses, structural engineering, or other related field with specific emphasis in dam design or dam safety. Perform the following structural engineering tasks: Perform engineering activities throughout all phases of a project lifecycle, including investigation, evaluation, analysis, design, and engineering services during construction on dams and related hydraulics structures.
Senior Propulsion Engineer GraviticsSenior Propulsion EngineerSeattle, Washington$135,000–$160,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Experience with CFD, thermal fluid system modeling, and/or combustion modeling tools (e.g., Thermal Desktop, ANSYS Fluent, MATLAB/Simulink, ROCETS, GFSSP, CEA, TDK).
Senior Propulsion Engineer Gravitics, IncSenior Propulsion EngineerSeattle, WA$135,000–$160,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Experience with CFD, thermal fluid system modeling, and/or combustion modeling tools (e.g., Thermal Desktop, ANSYS Fluent, MATLAB/Simulink, ROCETS, GFSSP, CEA, TDK).
Systems B777-9 EIS FSE - Systems EIS Support Engineer (Advanced Lead Engineer) GE AerospaceSystems B777-9 EIS FSE - Systems EIS Support Engineer (Advanced Lead Engineer)Mukilteo, WA$128,800–$171,350 / yearYou will develop a strong working knowledge of the assigned power products and facilitate the use of approved processes to provide integration testing and flight line support at the Customer's locations. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services.
MP&P Engineer 3 The Structures CompanyMP&P Engineer 3Auburn, WADefines and maintains material specifications, process controls, and acceptance criteria for metals, metal alloys, coatings, heat treatments, and joining processes including welding, brazing, adhesive bonding, and mechanical joining. Plans and executes metallurgical testing and characterization including microstructure analysis, hardness, tensile testing, fracture toughness, corrosion testing, and non-destructive inspection (NDI) techniques.
Manufacturing Engineer Actalent IncManufacturing EngineerRedmond, WA$60–$70 / hourYou partner closely with cross-functional teams to drive the seamless transition from development to production, with a strong focus on quality, efficiency, and reliability in a low-rate, high-complexity manufacturing environment. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service.
Systems Engineer - Traction Electrification Sound TransitSystems Engineer - Traction ElectrificationSeattle, WA$81,000–$155,000 / yearMINIMUM QUALIFICATIONS: Education and Experience: Bachelor's degree in Electrical Engineering, Mechanical Engineering, or closely related field and four years of mechanical systems engineering experience in design, construction or operations and maintenance of complex industrial mechanical systems; OR an equivalent combination of education and experience. Sound Transit also offers a competitive benefits package with a wide range of offerings, including: Health Benefits: We offer two choices of medical plans, a dental plan, and a vision plan all at no cost for employee coverage; comprehensive benefits for employees and eligible dependents, including a spouse or domestic partner.
Senior Systems Engineer - Traction Electrification Sound TransitSenior Systems Engineer - Traction ElectrificationSeattle, WA$87,000–$191,000 / yearSound Transit also offers a competitive benefits package with a wide range of offerings, including: Health Benefits: We offer two choices of medical plans, a dental plan, and a vision plan all at no cost for employee coverage; comprehensive benefits for employees and eligible dependents, including a spouse or domestic partner. Reviews and provides input to formal contract deliverables and submittals to provide assurance of project compliance with established agency technical criteria, policies and procedures for design development, systems interface coordination and integration, construction and testing and commissioning.
Sr Aerospace Engineer Pennant Solutions GroupSr Aerospace EngineerMukilteo, WashingtonThe Sr Aerospace Engineer applies advanced principles of physics—including classical mechanics, aerodynamics, thermodynamics, and electromagnetism—to support the design, development, and validation of aerospace systems. This individual plays a key role in test planning, technical documentation, and solving complex engineering problems such as pyrotechnic and pneumatic gas dynamics, multi-body kinematics, and heat transfer.