CSE GTF HPC Structures Senior Engineer (Onsite) RTXCSE GTF HPC Structures Senior Engineer (Onsite)ConnecticutNot Required At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. Compression Systems Engineering is responsible for the design, development, and in service support of all fans low-pressure and high-pressure compressors for commercial and military engine models.
Prin Engineer, Design Engineering (Onsite) RTXPrin Engineer, Design Engineering (Onsite)ConnecticutDesign and review layouts of components, calculate stack-up of detail components, and perform major cost studies consisting of new or existing details and/or marked prints and all supporting documentation, when necessary, to facilitate operations and ensure that established objectives and budgets are achieved. Design support across all phases of the design cycle, preliminary through detailed design, validation, manufacturing, and operational service and will work on the designs of any component within the Fan/LPC and/or HPC modules (i.e. Rotors, airfoils, cases, frames, kinematics, etc…).
Senior Electrical Engineer – Engineering Laboratory (Onsite) RTXSenior Electrical Engineer – Engineering Laboratory (Onsite)ConnecticutDesign and build advanced test environments that simulate real-world operating conditions for aerospace products including aircraft systems, Environmental Control Systems, jet engine fuel pumps, satellite thermal systems, propeller systems, and Electronic Engine Controls. Be it keeping passengers safe with our emergency power generation systems or creating a positive in flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers.
CSMC F135 Modernization Quality Engineer (Onsite) RTXCSMC F135 Modernization Quality Engineer (Onsite)ConnecticutCross-Functional Leadership: Gain experience in managing large-scale, multi-functional projects across engineering, quality, operations, and supplier teams. Not Required At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
PDC Quality Engineer (Onsite) RTXPDC Quality Engineer (Onsite)ConnecticutBachelor's Degree in a STEM or Business field and 5 or more years' experience in an engineering, manufacturing operations, materials management, project management, quality or related environment OR a Masters' Degree and minimum 3 years' experience in an engineering, manufacturing operations, materials management, project management, quality or related environment. Understanding of Lean Manufacturing concepts and/or experience with Kaizen events and/or experience with a continuous improvement program (CORE, Six Sigma); Value Stream Mapping, Workplace Organization, Continuous Flow Manufacturing, Total Productive Maintenance, DIVE, RCCA, Mistake Proofing, QCPC, etc.
Advanced Engines Senior Project Engineer P3 (onsite) RTXAdvanced Engines Senior Project Engineer P3 (onsite)East Hartford, ConnecticutCompression Systems Engineering is responsible for the design, development, and in service support of all fans low-pressure and high-pressure compressors for commercial and military engine models. Not Required At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
Cable Design & Specification Engineer Prysmian S.P.A.Cable Design & Specification EngineerWillimantic, CTWith Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. Experience interpreting complex specifications - ability to analyze multiple industry, customer, and internal specs, determine the most stringent requirements, and assess compliance (Specification Engineering experience).
Durability Data Analytics Principal Engineer P4 (Onsite) RTXDurability Data Analytics Principal Engineer P4 (Onsite)East Hartford, ConnecticutHot Section Engineering is responsible for the design, development, technology maturation and in service support of all diffuser cases, combustors, turbines (vanes, blades, rotors and cases), augmenters (military), nozzles and associated fuel systems for all military, commercial and industrial engine models and radial auxiliary power units. The Durability Discipline is highly specialized with particular focus on advanced cooling designs, aerodynamics, heat transfer, lifing, coatings, high-temperature aerospace alloys, and manufacturing.
Principal EMI/EMC Engineer (Onsite) RTXPrincipal EMI/EMC Engineer (Onsite)ConnecticutBe it keeping passengers safe with our emergency power generation systems or creating a positive in flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 8 years prior relevant experience or an Advanced Degree in a related field and minimum 5 years of experience.
Principal Propeller Hydromechanical Design Engineer (Onsite) RTXPrincipal Propeller Hydromechanical Design Engineer (Onsite)ConnecticutThe ideal candidate brings strong hydromechanical components and systems design, analysis, and test expertise with hydraulic valves, actuators, flyweight governors, EHSV’s, solenoids, and other typical hydraulic system components (seals, orifices, pin plugs, hydraulic housings, etc.). The Propeller System’s engineering organization in Windsor Locks is a small organization in comparison to many other product lines providing excellent opportunities for motivated engineers to work across multiple specialties supporting the full lifecycle of a product.
GTF Diffuser Combustor Design Sr. Principal Engineer P5 (Onsite) RTXGTF Diffuser Combustor Design Sr. Principal Engineer P5 (Onsite)East Hartford, ConnecticutHot Section Engineering is responsible for the design, development, technology maturation and in service support of all diffuser cases, combustors, turbines (vanes, blades, rotors and cases), augmenters (military), nozzles and associated fuel systems for all military, commercial and industrial engine models and radial auxiliary power units. Depending on the phase of the program, the tasks will vary, but may include clean sheet design, delivering development hardware to test engines, facilitating the delivery of hardware to production engines, processing engineering changes to improve the production configuration, and support of fielded engines.
Test Engineer Triumph GroupTest EngineerWest Hartford, CTBased in West Hartford, CT, Triumph Systems, Electronics and Controls is a leading independent aerospace system supplier for the commercial and military helicopter and business jet markets and employs approximately 500 employees. The Company's key products and services include electronic engine controls, fuel metering units, main fuel pumps and environmental control systems for both the OE and aftermarket/spares end markets.
Control Systems Senior Engineer P3 CDS (Onsite) RTXControl Systems Senior Engineer P3 CDS (Onsite)East Hartford, ConnecticutProficient in requirements management using DOORS and system safety analysis (using Isograph Reliability Workbench for fault tree analysis), and MBSE (Model Based System Engineering) for control system architecture & software development. Team members work on multidisciplinary Integrated Product Teams (IPT) to architect, model, develop and integrate state-of-the-art power thermal management systems with propulsion systems and aircraft.
Systems Integrator Engineer - Technical Publications (Onsite) RTXSystems Integrator Engineer - Technical Publications (Onsite)East Hartford, ConnecticutYou will collaborate with customers, partners, software engineers, IT teams, and third-party software providers within the Commercial Engine Engineering Maintenance Data and Services Engineering (CEE MDSE) organization to support existing technical publications systems, expand publishing automation, and deliver new solutions that address the evolving maintenance data needs of legacy and GTF programs. Support the delivery of XML/SGML technical data to airframers, airlines, and MRO organizations, enabling a seamless digital data thread and supporting technical publications authoring and digital data distribution systems.
Clinical Research Coordinator Genesis Orthopedics & Sports MedicineClinical Research CoordinatorOak Brook, ILWe are looking for candidates with prior clinical research experience who thrive in a fast-paced environment, can independently manage multiple studies, and are passionate about patient care and advancing clinical research. Genesis Orthopedics & Sports Medicine is seeking a motivated, organized, and detail-oriented Clinical Research Coordinator to join our growing research department in Oak Brook, Illinois.
Specimen Technician ManpowerSpecimen TechnicianChicago, ILThis role is essential to ensuring specimens are processed accurately and efficiently, directly impacting diagnostic quality and patient outcomes. This Specimen Technician opportunity with a leading diagnostics organization offers hands-on experience in specimen processing and a potential pathway to permanent hire.
Specimen Technician LancesoftSpecimen TechnicianWinfield, IL$16.20Functions performed may include but are not limited to A-station, presort, pickup and delivery of processed specimens to the laboratory, imaging/microfilming, centrifugation and aliquoting. Job is complex and requires that employee have good organization skills and is able to learn and understand specimen types related to test(s) ordered by client.
New Business Intake Analyst Alston & BirdNew Business Intake AnalystChicago, IL$75,000–$85,000 / yearStrong service orientation, and an ability to establish and maintain effective working relationships with internal customers, peers, office and firm management, and outside business partners. Strong interpersonal skills, including strong oral communication skills and the ability to communicate potentially detailed and complex information to personnel at all levels.
Pharmacy Technician Specialist Advocate Health Oncology - Float Advocate Health and Hospitals CorporationPharmacy Technician Specialist Advocate Health Oncology - FloatCrystal Lake, Illinois$24.10–$36.15 / hourHeadquartered in Charlotte, North Carolina, Advocate Health services nearly 6 million patients and is engaged in hundreds of clinical trials and research studies, with Wake Forest University School of Medicine serving as the academic core of the enterprise. Providing care under the names Advocate Health Care in Illinois; Atrium Health in the Carolinas, Georgia and Alabama; and Aurora Health Care in Wisconsin, Advocate Health is a national leader in clinical innovation, health outcomes, consumer experience and value-based care.
Project Assistant 1 University of ChicagoProject Assistant 1Chicago, IL$19.45–$22.71 / hourJob Summary: Under direct supervision, performs a variety of clerical, secretarial, fiscal, and coordination duties serving as a Project Assistant I in Auxiliary Services in the Social Sciences Division by interacting daily with faculty, staff and students delivering exceptional service for print/copy projects and course packets, and ensuring smooth logistics. The University of Chicago's Annual Security & Fire Safety Report (Report) provides information about University offices and programs that provide safety support, crime and fire statistics, emergency response and communications plans, and other policies and information.