Systems Engineer III Sierra Nevada CorpSystems Engineer IIIPlano, TX$108,496.89–$149,183.22 / yearJoin the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems.
Senior Engineer, Manufacturing Shield AISenior Engineer, ManufacturingDallas, TexasFull timeFull-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. You will play a key role in prototype builds, new product introduction (NPI), production readiness, and production ramp-up while driving improvements in manufacturability, quality, throughput, and cost.
NewElectrical Engineer III Sierra Nevada CorpElectrical Engineer IIIPlano, TX$108,496.89–$149,183.22 / yearThe ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support.
Structural Engineer III Sierra Nevada CorpStructural Engineer IIIPlano, TXJoin the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems.
Mid-Level Instrumentation and Controls Engineer ENSAFE IncMid-Level Instrumentation and Controls EngineerDallas, TXWhat we are looking for: We are seeking a Mid-Level Engineer who is ready to support electrical engineering designs, especially instrumentation and controls, across a variety of projects, including environmental remediation systems, industrial wastewater treatment systems, process engineering for active industrial/manufacturing facilities, and stormwater management. Hands-on expertise in the design, fabrication, troubleshooting, and installation of industrial control panels and motor control centers, including equipment selection, procurement, conduit sizing/installation, and wire terminations.
Sr. Electrical Engineer - (Component Engineering) RTX CorpSr. Electrical Engineer - (Component Engineering)Richardson, TXA successful candidate will support all component lifecycle needs for programs (electrical, mechanical, materials, process specifications, etc) and work with the Collins Component Engineering Team for expert-level support as needed. Specific responsibilities may include consultation with design engineering on part selection, qualification of components, performing root cause investigation and corrective action implementation, addressing part shortages and obsolescence, and technology roadmap management.
Senior Electrical Test Engineer Barber-Nichols, LLCSenior Electrical Test EngineerColorado, TX$120,000–$150,000 / yearITAR Requirements: To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Barber-Nichols must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e., current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158. Position Summary: The Senior Electrical Test Engineer owns the production test development, design for test analysis, test execution, and troubleshooting of power, digital, and analog circuits across product platforms.
Principal Electrical Engineer RTX CorpPrincipal Electrical EngineerMcKinney, TXAs part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Lead Transmission Line Engineer - Remote ICF International, IncLead Transmission Line Engineer - RemoteDallas, TXRemote$119,323–$202,850 / yearIn this role, you will provide senior‑level technical expertise, lead complex design and analysis work, mentor junior engineers, and ensure high‑quality deliverables across a wide range of transmission line engineering projects for utility clients. Pay Range - There are multiple factors that are considered in determining final pay for a position, including, but not limited to, relevant work experience, skills, certifications and competencies that align to the specified role, geographic location, education and certifications as well as contract provisions regarding labor categories that are specific to the position.
Senior Transmission Line Engineer - Remote ICF International IncSenior Transmission Line Engineer - RemoteDallas, TXRemote$98,614–$167,644 / yearIn this role, you will provide senior‑level technical expertise, lead complex design and analysis work, mentor junior engineers, and ensure high‑quality deliverables across a wide range of transmission line engineering projects for utility clients. Pay Range - There are multiple factors that are considered in determining final pay for a position, including, but not limited to, relevant work experience, skills, certifications and competencies that align to the specified role, geographic location, education and certifications as well as contract provisions regarding labor categories that are specific to the position.
Senior RF Electronics Engineer RTX CorpSenior RF Electronics EngineerMcKinney, TXExperience with any combination of the following tools: Signal generator, spectrum analyzer, network analyzer, Xpedition Schematic/Layout Tool or equivalent, SystemVue/Genesys or equivalent or Advanced Design System (ADS) or equivalent, High Frequency Structure Simulator (HFSS) or equivalent. A minimum of 5 years of relevant experience to include any combination of the following areas: RF, analog, digital, and power electronics test methodology and troubleshooting, RF circuit card design and fabrication, Simulation and analysis of RF products.
Aerostructures Design Engineer II (R5157) Shield AI IncAerostructures Design Engineer II (R5157)Dallas, TX$88,075–$132,113 / yearThis role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI's technology actively supports operations worldwide.
Staff Aerostructures Design Engineer (R5159) Shield AI IncStaff Aerostructures Design Engineer (R5159)Dallas, TX$136,730–$205,096 / yearThis role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI's technology actively supports operations worldwide.
Staff Aerostructures Design Engineer (R5160) Shield AI IncStaff Aerostructures Design Engineer (R5160)Dallas, TX$130,000–$200,000 / yearThis role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI's technology actively supports operations worldwide.
Aerostructures Design Engineer II (R5156) Shield AI IncAerostructures Design Engineer II (R5156)Dallas, TX$88,075–$132,113 / yearThis role is ideal for an aerospace mechanical engineer who thrives in hands-on design environments and is eager to take increasing ownership of flight-critical designs. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI's technology actively supports operations worldwide.
Senior Millwork Engineer / Project Design Manager Southwest Cabinet CorpSenior Millwork Engineer / Project Design ManagerPantego, TXOur work spans healthcare, institutional, entertainment, and other demanding commercial environments, and we place a high value on practical problem-solving, craftsmanship, and getting the details right. About AntonAnton Cabinetry is a Texas-based architectural millwork company known for taking on complex commercial projects where details, coordination, and finish quality matter.
Senior Controls Engineer Recruit MarksSenior Controls EngineerAddison, TexasThis role requires a blend of technical leadership, hands-on engineering, and project management to design, implement, and optimize control systems for industrial processes. The ideal candidate will be responsible for working directly with clients, leading project teams, and ensuring successful automation solution deployment.
Power Electronics - Principal Electrical Engineer Shield AI IncPower Electronics - Principal Electrical EngineerDallas, TX$211,125–$316,687 / yearCross-functional collaboration: Work closely with Mechanical, CAD, Embedded, Software, Supply Chain, Test Automation, Production and various aircraft teams throughout the product lifecycle. Full-cycle hardware development: Own the entire flow - concept, modeling, worst case analysis, schematic capture, simulation, prototyping, design reiteration for improving design maturity, testing and validation.
Staff Engineer, Software Embedded Applications (R5033) Shield AI IncStaff Engineer, Software Embedded Applications (R5033)Dallas, TX$160,000–$250,000 / yearThe Embedded Software Engineer works with in a high pace environment with a cross-functional team of program stakeholders, electrical engineers, Guidance, Navigation and Controls (GNC) engineers, systems engineers, test engineers and the autonomy team, to design and develop software systems which utilize modern aerospace sensors, state-of-the-art UAV avionics. Job Description: We are seeking skilled, experienced embedded software engineers with relevant experience in C++ in embedded systems to join our X-BAT Embedded Software Team focused on developing complex avionics software that merges hardware and embedded applications for cutting-edge Unmanned Aerial Vehicles (UAV).
Staff Engineer, Power Electronics (R5906) Shield AI IncStaff Engineer, Power Electronics (R5906)Dallas, TX$150,000–$230,000 / yearProactively identify opportunities for improvement within hardware development projects, demonstrating initiative to propose and implement innovative solutions that enhance efficiency, quality, and overall project success and aircraft reliability. A track record of successfully shipping products, showcasing the ability to navigate through development cycles, overcome obstacles, and deliver high-quality solutions to meet project deadlines and exceed expectations in a fast-paced environment.