NewSenior System Integration Engineer - Test & Validation Halo Industries, Inc.Senior System Integration Engineer - Test & ValidationSanta Clara, CA$150,000–$165,000 / yearThe ideal candidate will have deep hands-on experience with complex electro-mechanical and optomechanical hardware, including lasers, motion stages, and control electronics, and will be responsible for ensuring that all system components perform to specification through rigorous test and validation. This is a hardware-focused documentation, test, and validation role – ideal for an engineer passionate about working directly with instrumentation, sensors, and high precision actuators to drive reliability and performance improvements in a fast-paced manufacturing environment.
NewChemical Handler- Trainee Sierra Circuits inc.Chemical Handler- TraineeSunnyvale, CAThe Chemical Handler - Trainee is responsible for making chemical additions, new make ups, and all other chemical maintenance requirements to all tanks and conveyor equipment as requested by the Chemical Laboratory and/or procedures. Ability to work within the confines of a room where concentrations of chemicals are located and work around very hot equipment and molten solder.
NewProduction Operator 2 - SMT (Swing) UnigenProduction Operator 2 - SMT (Swing)Newark, CAPrior on-the-job experience of at 2+ years in the same or similar industry, High school diploma is required, Ability to work with speed and accuracy and follow written and verbal instructions, Familiarity with SMT automatic assembly equipment: Screen Printer (Panasonic NM-EJP1A), SPI (TRI7007), Pick & Place (Panasonic NM-EJM8A; Fuji Amex 3), Reflow Oven (Vitronics XPM3i), IPC-A-610 Acceptability of Electronic Assemblies, Familiarity with ADP Workforce Now (Employee Self-Service Portal). 1. Responsible for the overall operation of the assigned SMT line/unit: Set up and operate automated SMT (Surface Mount Technology) assembly equipment including Screen Printer, Pick and Place Machine, Reflow Oven, and X-Ray Machine, Clean boards and load printed circuit boards into equipment, Pick components and load feeders, Perform visual inspections of SMT assemblies, Unload finished assemblies from equipment and store them according to work instructions.
New3rd OPS Operator (Second Shift) Rocket EMS3rd OPS Operator (Second Shift)Santa Clara, CA$23–$25 / hourSupport other post-production areas as needed, including touch-up support, final assembly prep, rework support, masking removal, cleaning, or packout preparation. This position requires strong attention to detail, the ability to follow work instructions, and comfort working with printed circuit board assemblies, hand tools, fixtures, and production equipment.
NewStaff Satellite Electrical Engineer - Mixed Signal Circuits E-SpaceStaff Satellite Electrical Engineer - Mixed Signal CircuitsSaratoga, CA$120,000–$200,000 / yearAn opportunity to really make a difference • Sustainability at our core • Fair and honest workplace • Innovative thinking is encouraged • Competitive salaries • Continuous learning and development • Health and wellness care options • Financial solutions for the future • Optional legal services (US only) • Paid holidays • Paid time off . We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life.
NewContract Manufacturing Rework Tech Omega EMSContract Manufacturing Rework TechSan Jose, CAMonitors operation of the soldering irons to solder electronic components to printed circuit board. 5+ years working in reworking BGA/Touch-Up/Repair on PCBA.
NewBox-build and Electro-mechanical Engineer Omega EMSBox-build and Electro-mechanical EngineerSan Jose, CA$100,000–$120,000 / yearThe Box Build & Electro-Mechanical Engineer supports the manufacturing of complete electro-mechanical systems by reviewing customer-supplied data, drawings, and specifications; identifying opportunities for improved manufacturability; and ensuring efficient, accurate production execution. Work closely with customer engineering teams to ensure all requirements are met, while developing, implementing, and maintaining manufacturing processes for box build assemblies that integrate PCBs and other electro-mechanical components into complete enclosures.
NewWire Harness Technician ATR InternationalWire Harness TechnicianSan Jose, CA$30–$40 / hournCompany Description ATR International is a staffing and workforce solutions firm providing high‐quality talent across a wide range of industries, including technology, operations, and professional services. ATR International is a staffing and workforce solutions firm providing high‐quality talent across a wide range of industries, including technology, operations, and professional services.
NewSenior RF Design Engineer Array LabsSenior RF Design EngineerRedwood City, CAYour work will include low-noise receive chains, high-power transmit chains, RF switching and protection, bias and control circuitry, and integration of transceiver and timing-critical RF subsystems. Select components, capture schematics, and design complex RF assemblies including receive and transmit chains, switching networks, filtering, and protection circuitry.
NewPCBA Engineering Technician West Valley Staffing GroupPCBA Engineering TechnicianSan Jose, CACollaborate with cross-functional teams (including engineering, reliability, test and operations) to develop processes for prototype builds, test, failure mode identification and troubleshooting playbook through various experimental set-ups and systems. • Document learnings and failure modes, analyze data and communicate to cross-functional teams to drive product changes into future builds to track and to execute incremental improvements.
NewElectrical Hardware Test Engineer nEye.aiElectrical Hardware Test EngineerSanta Clara, CAYou'll develop test systems for semiconductors and PCBAs, find creative ways to test difficult components, debug complex electrical issues, and validate ASICs, boards, and subsystems as they move from prototype into production. The ideal candidate is a creative, out-of-the-box thinker who enjoys building custom test stations and solving hard problems at the intersection of electronics, embedded systems, and semiconductor technology.
NewRepair Specialist 1 MC Test Service IncRepair Specialist 1Fremont, CAKey Responsibilities: Responsible for performing all tasks necessary to rework and repair PC Boards Complex rework such as removing and replacing IC’s. Join us in this exciting journey as a Repair Specialist, making a significant impact on the manufacturing of cutting-edge electronics products.
New2D X-Ray Operator (Second Shift) Rocket EMS2D X-Ray Operator (Second Shift)Santa Clara, CA$23–$25 / hourPay Range $23—$25 USD ITAR/EAR Compliance: Due to the nature of the work performed at Rocket EMS, this position may require access to export-controlled technical data or technology. We're looking for a detail-oriented Machine Operator to run and maintain our 2DX X-ray inspection equipment as part of our electronics manufacturing team.
NewManufacturing Technician Contractor Ceribell, IncManufacturing Technician ContractorSunnyvale, CA$19–$25 / hourThe Ceribell System is a novel, point-of-care electroencephalography ("EEG") platform specifically designed to address the unmet needs of patients in the acute care setting, and is being used in hundreds of community hospitals, large academic facilities and major IDN's across the country. The Manufacturing Technician, reporting to the Manufacturing Operations Director, is a member of the production team and is responsible for material kitting, performing the assembly, inspection and testing of electro-mechanical subassemblies.
NewVehicle Technician Insight GlobalVehicle TechnicianPalo Alto, CA$24–$36 / hourThis role sits between a traditional technician and an engineer, making it a great fit for someone who enjoys working with vehicles, electronics, wiring, and custom builds. Our client is seeking a hands-on Vehicle Technician to support the design, assembly, testing, and validation of custom hardware systems used for vehicle and software development.
NewSMT 2 MC Test Service IncSMT 2Fremont, CAMust have proficient computer skills: Basic computer functions and ability to navigate applications associated with work instructions. Ability to recognize problems in the operation process or with components and to highlight/communicate those problems to team leader.
NewSMT 3 MC Test Service IncSMT 3Fremont, CAMust have proficient computer skills: Basic computer functions and ability to navigate applications associated with work instructions. Ability to recognize problems in the operation process or with components and to highlight/communicate those problems to team leader.
NewProduction Specialist (Soldering) Sterling Engineering Inc.Production Specialist (Soldering)Milpitas, CA$25–$26 / hourThe ideal candidate has strong soldering skills, experience reading work instructions and technical documentation, and the ability to troubleshoot assembly-related issues in a fast-paced manufacturing environment. What You’ll Be Doing: Perform production soldering on electronic components, printed circuit boards, cables, and assemblies.
NewQuality Assurance AerotekQuality AssuranceSouth San Francisco, CA$35–$38 / hourSince 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. You will verify product conformance using precision measurement tools, interpret engineering drawings and specifications, and document nonconformances while supporting root‑cause investigations and continuous improvement of quality processes.
NewCable & Wire Harness Assembler CTEMS COMPANY, LLCCable & Wire Harness AssemblerFremont, CAJob Description SUMMARY: Under limited direction of a lead/supervisor/manager, provides assembly support in building cable and/or wire harness assemblies. Basic computer skills (database management, word processing and spreadsheet).