R&D Manufacturing Engineer (Entry- Level) ST Engineering North AmericaR&D Manufacturing Engineer (Entry- Level)Baltimore, MD$64,400–$95,900 / yearp>We are seeking a hands-on, self-driven and highly collaborative R&D Manufacturing Engineer to join our Advanced Technology team, supporting new development projects and industrialization of new products, tooling and manufacturing processes. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none.
Entry Level Manufacturing, 2nd shift, 3:15p- 1:45a Terumo Medical CorpEntry Level Manufacturing, 2nd shift, 3:15p- 1:45aElkton, MDp>Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. Terumo Medical Corporation (TMC) develops, manufactures, and markets a complete, solutions-based portfolio of high-quality medical devices used in a broad range of applications for numerous areas of the healthcare industry.
NewPrincipal/ Sr. Principal Energetics Manufacturing Engineer level 3-4 Northrop Grumman CorpPrincipal/ Sr. Principal Energetics Manufacturing Engineer level 3-4Elkton, MD$108,800–$163,200 / yearToday, the Elkton PS&C facility designs, develops, and produces solid-propellant propulsion and ordnance systems in programs professionally managed for a wide variety of Government and commercial customers. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Manufacturing Engineer II - Portable Metrology Apollo Professional SolutionsManufacturing Engineer II - Portable MetrologyYork, PA
Manufacturing Engineer Danaher CorpManufacturing EngineerMD$95,000–$120,000 / yearFrom airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper-everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. The Manufacturing Engineer's responsibilities include the support of manufacturing operations in the production of filtration products by improving Safety, Ergonomics, On Time Delivery (OTD), Productivity and increasing yields of manufacturing activities.
NewManufacturing Engineer Caltek StaffingManufacturing EngineerBaltimore, MD$110,000–$125,000 / yearThis position is highly visible within the organization and requires a hands-on engineer who is comfortable spending significant time on the manufacturing floor troubleshooting production issues, validating processes, and identifying opportunities for operational improvement. The Manufacturing Engineer III will support manufacturing operations by developing and implementing production methods, improving manufacturing processes, optimizing equipment utilization, and driving continuous improvement initiatives throughout the facility.
Manufacturing Engineer I/II Rocket Lab CorporationManufacturing Engineer I/IIMiddle River, MD$77,000–$119,000 / yearFor more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..
Senior Manufacturing Engineer, Machining Rocket Lab CorpSenior Manufacturing Engineer, MachiningMiddle River, MD$115,000–$165,000 / yearp>Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Specialist, Manufacturing Engineer(Operations Program Manager) L3Harris Technologies IncSpecialist, Manufacturing Engineer(Operations Program Manager)Hanover, MD$67,000–$124,000 / yearp>Job Description: The Manufacturing Engineer role will operate as an Operations Program Manager (OPM) - directs the development and implementation of activities in production areas to production goals, quality, cost, and delivery objectives. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Associate Manager, Manufacturing Engineering L3Harris Technologies IncAssociate Manager, Manufacturing EngineeringHanover, MD$104,000–$155,000 / yearp>Support design engineering during the design / development process to ensure that the design represents a cost-effective solution in terms of reliability, producibility, and supportability and meets the performance requirements over the life of the product. Develop and implement manufacturing engineering plans and schedules including process flows, test and inspection points, flow tags, assembly aids, use of automated test equipment, training needs and requirements.
Senior Manufacturing Engineer Rocket Lab CorporationSenior Manufacturing EngineerMiddle River, MD$108,000–$165,000 / yearFor more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..
Manufacturing Engineer - Operations Leadership Track RHI Magnesita GmbHManufacturing Engineer - Operations Leadership TrackYork, PAFrom advanced lithium-ion batteries for laptops and EVs and specialized glass on smartphones and tablets, to the steel and cement that build the world around us, our high-performance bricks and linings make it possible to melt, bend, shape, and refine these materials at extreme temperatures. RHI Magnesita is hiring Manufacturing Engineers to join our Operations Leadership Track, designed for engineers who want to apply technical expertise on the plant floor while building toward plant leadership.
Manufacturing Engineer LatitudeManufacturing EngineerSparks, Maryland$80,000–$115,000 / yeardiv>Key Responsibilities:Develop and optimize manufacturing processes to improve efficiency, reduce costs, and ensure product quality.Collaborate with cross-functional teams, including design, quality, and production, to ensure seamless integration of manufacturing processes.Utilize Sigma or Lean Manufacturing certification.Master’s degree in Manufacturing Engineering or a related field.$80,000 - $115,000 a year
Manufacturing Engineer I/II Rocket Lab USAManufacturing Engineer I/IIMiddle River, MD$77,000–$119,000 / yearFull timeDemonstrated experience managing complex projects which led to successful outcomes Experience working in a fast-paced environment ADDITIONAL REQUIREMENTS Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.
Manufacturing Engineer, 2nd Shift Johnson Controls International PlcManufacturing Engineer, 2nd ShiftYork, PA$67,000–$95,000 / yearPrevious experience Plant Operations Manager, Plant Continuous Improvement Manager, or Plant Manager with new products and process introductions along with a working knowledge of lean manufacturing practices and procedures is also required. For details, please visit the About Us tab on the Johnson Controls Careers site at https://jobs.johnsoncontrols.com/about-us
NewManufacturing Engineer Intern IDEXManufacturing Engineer InternLinthicum, MDStrong candidates will demonstrate: + Curiosity about how things are built and how processes can be improved + Willingness to work hands-on in a manufacturing environment + Ability to break down ambiguous problems into structured steps + Application of basic engineering principles to real-world scenarios + Strong observation skills and attention to detail + Comfort engaging with operators, asking questions, and gathering feedback + Clear communication of ideas, even when solutions are still being developed This role is ideal for students who want to gain practical manufacturing experience and develop real engineering judgment through ownership of meaningful projects. With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses (https://www.idexcorp.com/our-businesses/business-segments/) around the globe, chances are, we have something special for you.
Engineer Manufacturing Northrop Grumman CorpEngineer ManufacturingElkridge, MD$79,600–$119,400 / yearp>Basic Qualifications for the Engineer Manufacturing 2: Bachelor's degree in mechanical engineering or related STEM field and a minimum of 2+ years of relevant experience; or a master's degree in mechanical engineering or related STEM field and a minimum of 0 years of experience. Interface with manufacturing management, technicians, production engineers, design engineers, system engineers, program management and program support teams.
Senior Manufacturing Engineer Rocket Lab USASenior Manufacturing EngineerMiddle River, MD$108,000–$165,000 / yearFull timeDemonstrated experience managing complex projects which led to successful outcomes Experience working in a fast-paced environment Experience with the use of NX/Teamcenter ADDITIONAL REQUIREMENTS Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.
Manufacturing Engineer II/III Textron IncManufacturing Engineer II/IIIHunt Valley, MD$88,200–$133,000 / yearIn compliance with local pay transparency law, the pay range for this position is: o Level 2 Engineer: Typically, 3 years of experience $88,200 - $133,000 per year o Level 3 Engineer: Typically 5 years of experience $98,600 - $149,400 per year 3 years of experience in a manufacturing environment (preferably electrical/electronic/RF experience) Experience and relevant background in application of materials, manufacturing methods and equipment; especially in regards to assembling, troubleshooting, repairing electronic systems, circuits, test equipment and cables/harnesses Knowledge of electronics, electrical, RF, mechanical design and lean manufacturing principles. Benefits may include health insurance and prescription plan coverage, dental insurance, family building benefits, vision insurance, mental health resources, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and programs that provide employees time away from work.
Manufacturing Engineer I Rocket Lab USAManufacturing Engineer IMiddle River, MD$80,000–$95,000 / yearFull timeWHAT YOU’LL GET TO DO: Identify, plan, and execute capital equipment, machine, and layout definitions to the meet volume requirements including preparation of business cases Develop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor sign-offs Design, develop, and implement tooling and equipment for use in a production environment where required to achieve safety, quality, delivery and cost requirements Actively contribute to facility construction projects including requirements generation, design reviews and implementation support Contribute to design reviews in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc. Oversee introduction and implementation of new products and product revisions as related to the Neutron launch vehicle composite structure Lead problem containment and structured root cause & corrective action investigations Quickly analyze and resolve manufacturing discrepancies and non-conformances Introduce automation where appropriate and ensure equipment data links directly to MRP and quality systems Identify risks and improvements to develop the manufacturing engineering department to meet company needs YOU’LL BRING THESE QUALIFICATIONS: Bachelor’s degree in engineering (mechanical, aerospace, manufacturing, or similar discipline).
Sr Manufacturing Engineer General Dynamics CorpSr Manufacturing EngineerRed Lion, PAp>General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world. Integrity is paramount, innovation fuels our passion, customer satisfaction is at the core of our mission, and collaboration is key to our success - fostering a culture of teamwork and mutual respect among employees, partners, and stakeholders.
Sr Manufacturing Engineer General Dynamics Ordnance and Tactical Systems IncSr Manufacturing EngineerRed Lion, PAp>Provides technical oversight for DoD ammunition production programs through production support, continuous improvement, ensuring compliant, on-schedule delivery and resolving technical issues to maintain safety and meet all contractual requirements. General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world.
Sr Manufacturing Engineer General Dynamics Ordnance & Tactical SystemsSr Manufacturing EngineerRed Lion, PennsylvaniaJob Summary: Provides technical oversight for DoD ammunition production programs through production support, continuous improvement, ensuring compliant, on-schedule delivery and resolving technical issues to maintain safety and meet all contractual requirements. Company Overview: General Dynamics Ordnance and Tactical Systems (OTS) is a global leader in the design, engineering and production of munitions, energetics, weapons, armaments, and missile subsystems around the world.
NewLead R&D Manufacturing Engineer ST Engineering North AmericaLead R&D Manufacturing EngineerBaltimore, MD$92,000–$138,100 / yearp>We are seeking a hands-on, self-driven and highly collaborative R&D Manufacturing Engineer to join our Advanced Technology team, supporting new development projects and industrialization of new products, tooling and manufacturing processes. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none.
Associate Engineer, Structural Design XTI Aerospace IncAssociate Engineer, Structural DesignCoatesville, PAThis entry‑level role involves working under senior engineers to create CAD models, perform basic stress analyses, and generate structural drawings-all while learning industry best practices in composite and metallic structure design. Through its acquisition of Drone Nerds, a leading U.S. enterprise drone solutions provider, XTI is expanding into the broader unmanned aircraft systems (UAS) market-building a comprehensive platform across both manned and autonomous flight.
YRK USW Welder (Tidewater Tech) BAE Systems PlcYRK USW Welder (Tidewater Tech)York, PAp>About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. The welding processes may include mig wire, dual shield, flux core, submerged arc, tig or stick electrode welding, carbon arc gouging, plasma arc gouging, and oxy-acetylene cutting.
YRK USW Welder (Workshops for Warriors) BAE Systems PlcYRK USW Welder (Workshops for Warriors)York, PAAbout BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. The welding processes may include mig wire, dual shield, flux core, submerged arc, tig or stick electrode welding, carbon arc gouging, plasma arc gouging, and oxy-acetylene cutting.
YRK USW Welder (UTI-Mooresville) BAE Systems PlcYRK USW Welder (UTI-Mooresville)York, PAp>About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. The welding processes may include mig wire, dual shield, flux core, submerged arc, tig or stick electrode welding, carbon arc gouging, plasma arc gouging, and oxy-acetylene cutting.
YRK USW Welder (Hobart) BAE Systems PlcYRK USW Welder (Hobart)York, PAp>About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. The welding processes may include mig wire, dual shield, flux core, submerged arc, tig or stick electrode welding, carbon arc gouging, plasma arc gouging, and oxy-acetylene cutting.
Fire Protection Engineer United States ArmyFire Protection EngineerAberdeen Proving Ground, MD$85,447–$133,142 / yearp>In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE for the GS-11 level: One year of specialized experience which includes:1) Experience practicing fire protection engineering using scientific disciplines such as civil, mechanical, electrical engineering or architectural design, 2. Experience assessing and predicting fire hazards and risks, 3. Experience preventing, detecting, controlling, and suppressing fire events, and 4. Experience practicing fire code policy, e.g. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.
Energy Manager United States ArmyEnergy ManagerAberdeen Proving Ground, MD$102,415–$158,322 / yearp>Specialized Experience: One year of specialized experience FOR THE GS-12 GRADE LEVEL which includes: 1) Assist with energy management plans to conserve energy within offices/buildings; 2) Assist with administering an energy program for conserving energy; 3) Assist with conducting studies or research for an energy program in order to conserve energy; 4) Experience evaluating utility rate structures; AND 5) Experience preparing utility billing estimates. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.