Embedded Software Engineer Sr. Lockheed MartinEmbedded Software Engineer Sr.Bothell, WADemonstrated experience in board bring up activities working closely with electrical engineers \- Demonstrated experience troubleshooting small and large scale systems across software, firmware, and hardware \- Experience using various communication protocols including: SPI, I2C, RS\-422, RS\-485, CANbus, TCP/UDP \- Experience and ability working with cross functional/multi\-disciplinary teams \- Ability to work in a fast paced environment \- Experience with GitLab CI/CD Pipelines \- Software firmware interface development experience using across various chip suppliers \- Strong communication and team collaboration skills \- Experience integrating software in an embedded hardware environment **Security Clearance Statement:** This position requires a government security clearance, you must be a US Citizen for consideration\. **Schedule for this Position:** 4x10 hour day, 3 days off per week **Pay Rate:** The annual base salary range for this position in California, Massachusetts, and New York \(excluding most major metropolitan areas\), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $93,200 \- $164,450\.
Director, Design Verification Microsoft CorpDirector, Design VerificationRedmond, WA$142,800–$274,800 / yearDoctorate in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 3+ years technical engineering experience OR Masters Degree in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 6+ years technical engineering experience OR Bachelors Degree in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 8+ years technical engineering experience OR Equivalent Experience. To achieve this goal, the Artificial Intelligence System on Chip (AISoC) team is instrumental in defining and delivering operational measures of success for hardware manufacturing, improving the planning process, quality, delivery, scale and sustainability related to Microsoft cloud hardware.
Facilities Engineer Providence Health & ServicesFacilities EngineerEdmonds, WA$38.03–$57.69 / hourIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Requsition ID: 438889 Company: Swedish Jobs Job Category: Facilities Management Job Function: Facilities Job Schedule: Full time Job Shift: Evening Career Track: Technical/Skilled Support Department: 3905 SED FACILITY MANAGEMENT Address: WA Edmonds 21601 76th Ave W Work Location: Swedish Edmonds 21601 76th Workplace Type: On-site Pay Range: $38.03 - $57.69
Specialist, Tooling Engineer L3HarrisSpecialist, Tooling EngineerRedmond, WA$79,000–$147,000 / yearPlease click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . L3Harris announced (https://www.l3harris.com/newsroom/press-release/2026/01/l3harris-sell-majority-stake-space-propulsion-power-business-ae) on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business.
Senior Power Distribution Controls Engineer - Seattle, WA Eaton CorporationSenior Power Distribution Controls Engineer - Seattle, WATukwila, WARemote$100,000–$147,000 / yearPreferred Qualifications:** + Bachelor's degree in Electrical Engineering from an accredited institution + Professional Engineering license + 5+ years' experience with power system controls + Experience with relay logic + Working knowledge of test equipment and diagnostic instruments for automation and power management systems. This team of talented engineers and technicians provides single point responsibility and seamless integration, transcending all major manufacturers of HMIs, PLCs, protective relays, and switchgear controls related components.
Design Verification Engineer (Silicon Engineering) SpaceXDesign Verification Engineer (Silicon Engineering)Redmond, WA$125,000–$145,000 / yearRESPONSIBILITIES: + Responsible for digital ASIC verification at block and system level + Write and review test plans, develop test harnesses and test sequences + Develop SystemVerilog testbench infrastructure (both UVM and non-UVM) for testing designs, including DSP blocks + Responsible for test plan execution, running regressions, code and functional coverage closure + Automate test case generation by using Python and MATLAB programs + Contribute towards pre-silicon verification, chip bring-up and post-silicon validation + Be a hands-on self-starter who can execute the steps required to fully verify a complex digital designs BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer science or computer engineering + 1+ years of experience with design verification and test bench development PREFERRED SKILLS AND EXPERIENCE: + Advanced degree in electrical engineering or computer engineering + Experience with verification methodologies such as UVM + Strong object-oriented programming knowledge + Strong problem-solving and coding skills + Experience in constrained random verification + Expertise in developing test plans, implementing coverage models, and analyzing results + Experience with scripting languages, e.g. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Sr. RFIC Design Engineer (RFIC Engineering) SpaceXSr. RFIC Design Engineer (RFIC Engineering)Redmond, WA$160,000–$225,000 / yearRESPONSIBILITIES: + Design, simulate and model RF/analog/mixed-signal circuits and systems + Derive specifications for the RFIC subsystems and circuits + Develop Analog/Mixed-Signal/RF/microwave circuits in SiGe or CMOS processes + Work with system architects, modem/DSP and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Model package and external parasitic components + Evaluate and characterize prototypes of the design + Characterize and analyze full radio performance + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the RFIC components and systems BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 5+ years of RF integrated circuit experience PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering or computer engineering with an emphasis in RF/Analog/Mixed-signal integrated circuit design + Experience using simulation tools such as Spectre, ADS, HFSS or Momentum + Circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as phase-locked loops, vector modulators/demodulators, oscillators, mixers, filters, low noise and power amplifiers + Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM + Knowledge of RF transceiver architectures + RF/microwave design in the Ku-band, K-band and Ka-band frequency range + Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance in microwave frequencies ADDITIONAL REQUIREMENTS:? ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewHardware Reliability Engineer (Starlink) Space Exploration TechnologiesHardware Reliability Engineer (Starlink)Redmond, WA$100,000–$117,500 / yearAs a Hardware Reliability Engineer on the Starlink team, you will be responsible for solving systemic production issues, running root cause of failures from end to end, and working to drive process and design changes to continually improve production and on-orbit product quality and reliability. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Senior/Principal Software Engineer Endurance EnergySenior/Principal Software EngineerSeattle, WashingtonYou will be in the room with the hardware engineers designing subsea power plants, the manufacturing leads building the production system, the supply chain leads structuring procurement, and the operators running ocean deployments, designing and delivering the software that makes their work faster, safer, and more scalable. The ideal candidate is a senior or staff engineer who has strong judgment on when to buy a vendor product and when to write your own, can hold technical credibility with mechanical, electrical, and systems engineers, and is energized by building the software that operates a category of energy infrastructure that has never existed before.
Senior IC Packaging Engineer MicrosoftSenior IC Packaging EngineerRedmond, WA$119,800–$234,700 / yearDoctorate in Physics, Electrical Engineering, Computer Engineering, Computer Science, Chemistry, or related field AND 3+ years technical engineering experience OR Masters Degree in Physics, Electrical Engineering, Computer Engineering, Computer Science, Chemistry, or related field AND 6+ years technical engineering experience OR Bachelors Degree in Physics, Electrical Engineering, Computer Engineering, Computer Science, Chemistry, or related field AND 8+ years technical engineering experience OR equivalent experience. Doctorate in Electrical Engineering, Computer Engineering, Computer Science, Physics, Chemistry or related field AND 1+ year(s) technical engineering experience OR Masters Degree in Electrical Engineering, Computer Engineering, Computer Science, Physics, Chemistry or related field AND 4+ years technical engineering experience OR Bachelors Degree in Electrical Engineering, Computer Engineering, Computer Science, Physics, Chemistry or related field AND 5+ years technical engineering experience OR equivalent experience.
Embedded Software Engineer Actalent IncEmbedded Software EngineerSeattle, WA$74–$87 / hourThe Flight Software Engineer plays a key role in the Satellite Embedded Software Group, serving as a hands-on individual contributor and technical leader for satellite imaging payload and attitude determination and control (ADCS) subsystems. The culture emphasizes being people-first, customer-focused, and engaging, with opportunities to make a meaningful impact across multiple critical satellite programs while working with cutting-edge space and software technologies.
Sr. Rfic Design Engineer (Rfic Engineering) Space Exploration TechnologiesSr. Rfic Design Engineer (Rfic Engineering)Redmond, WA$165,000–$270,000 / yearCircuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as phase-locked loops, vector modulators/demodulators, oscillators, mixers, filters, low noise and power amplifiers. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
RFIC Design Engineer (RFIC Engineering) SpaceXRFIC Design Engineer (RFIC Engineering)Redmond, WA$125,000–$145,000 / yearRESPONSIBILITIES: + Design, simulate and model RF/analog/mixed-signal circuits and systems + Derive specifications for the RFIC subsystems and circuits + Develop Analog/Mixed-Signal/RF/microwave circuits in SiGe or CMOS processes + Work with system architects, modem/DSP and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Model package and external parasitic components + Evaluate and characterize prototypes of the design + Characterize and analyze full radio performance + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the RFIC components and systems BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 2+ years of RF integrated circuit experience PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering or computer engineering with an emphasis in RF/Analog/Mixed-signal integrated circuit design + Experience using simulation tools such as Spectre, ADS, HFSS or Momentum + Circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as phase-locked loops, vector modulators/demodulators, oscillators, mixers, filters, low noise and power amplifiers + Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM + Knowledge of RF transceiver architectures + RF/microwave design in the Ku-band, K-band and Ka-band frequency range + Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance in microwave frequencies ADDITIONAL REQUIREMENTS:? ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Battery Test Engineer, Satellites (Starlink) SpaceXBattery Test Engineer, Satellites (Starlink)Redmond, WA$100,000–$115,000 / yearRESPONSIBILITIES: + Create test fixturing concepts, fabrication drawings, wiring schematics, and to establish mechanical, thermal, and electrical tests necessary for rapid development of battery packs and cells + Develop and maintain test facilities including abuse testing chambers and vacuum chambers + Establish safety protocols for high voltage applications and various destructive tests of battery cells + Design test fixtures and data acquisition systems + Document test plans, procedures, and results + Provide feedback on system level design trades + Design and analyze structures, fluid systems, and mechanisms + Operate test beds with great attention to detail (tests have very little margin for error, so attention to detail is a crucial and essential characteristic of a development test engineer) + Develop test requirements with the flight engineering team, develop a design solution that meets or exceeds those requirements, and drive the campaign to closure BASIC QUALIFICATIONS: + Bachelor's degree in mechanical engineering + 1+ years of experience in one or more of the following: + Involvement with an extracurricular project team designing and building mechanical fixturing and/or battery systems + Academic research on mechanical structures and batteries + Professional experience designing and analyzing mechanical structures and fixturing PREFERRED SKILLS AND EXPERIENCE: + Experience with electrical, electrochemical, fluidic, electromechanical, thermal, structural, pneumatic, and vacuum systems + Experience with basic test instrumentation such as current sensors, contactors, pressure transducers, thermocouples, RTDs, strain gauges, accelerometers, flow meters, load cells, relays, solenoid valves, and encoders + Experience with Arbin and Novonix cell cyclers + Experience with Unigraphics (NX) or similar CAD programs + Experience performing finite element analysis (FEA) + Experience with lithium-ion battery handling, safety and usage + Demonstrated understanding of structural and mechanical first principles analysis + Familiarity with battery cell first principles + Demonstrated full-cycle ownership of a hardware project from concept to implementation + Hands-on experience with testing, data acquisition, and troubleshooting issues + Hands-on design and fabrication experience + Basic programming skills (Python and SQL preferred) ADDITIONAL REQUIREMENTS: + Must be willing to travel as needed, up to 25% to other SpaceX sites + Physical effort including standing, lifting, and carrying equipment up to 25 lbs. This individual is ultimately responsible for the outcome of Starlink batteries and must define overall test campaigns necessary to assess the performance of new cell technologies across our operational conditions and determine whether the fully assembled pack will function reliably, and safely, in-orbit for the life of the satellite.
Flight Software Engineer (Starlink Mobile) SpaceXFlight Software Engineer (Starlink Mobile)Redmond, WA$125,000–$145,000 / yearWe own the full stack from the bare metal microcontroller firmware that drives our custom silicon, to Linux kernels and drivers on our larger CPUs and FPGAs, to the realtime phased array control, network control, and vehicle control that flies our satellites. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Engineer, Satellite Harnessing (Starlink) SpaceXMechanical Engineer, Satellite Harnessing (Starlink)Redmond, WA$100,000–$115,000 / yearYou may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. MECHANICAL ENGINEER, SATELLITE HARNESSING (STARLINK) At SpaceX we're leveraging our experience in building rockets and spacecraft to deploy Starlink, the world's most advanced broadband internet system.
Rfic Design Engineer (Rfic Engineering) Space Exploration TechnologiesRfic Design Engineer (Rfic Engineering)Redmond, WA$125,000–$160,000 / yearCircuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as phase-locked loops, vector modulators/demodulators, oscillators, mixers, filters, low noise and power amplifiers. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Battery Test Engineer, Satellites (Starlink) Space Exploration TechnologiesBattery Test Engineer, Satellites (Starlink)Redmond, WA$100,000–$115,000 / yearThis individual is ultimately responsible for the outcome of Starlink batteries and must define overall test campaigns necessary to assess the performance of new cell technologies across our operational conditions and determine whether the fully assembled pack will function reliably, and safely, in-orbit for the life of the satellite. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Software Engineer, Hardware Test & Automation (Starlink) SpaceXSoftware Engineer, Hardware Test & Automation (Starlink)Redmond, WA$125,000–$145,000 / yearOur software engineers are responsible for the tools that enable rapid development and accurate testing of all Starlink hardware systems, with a continual focus on design, reliability, and innovation, from test hardware system designs to our software infrastructure. Aerospace experience is not required to be successful here – engineers on this team are curious, and collaborative, love to learn new things, and work effectively in a dynamic environment to deliver high-impact technology on a massive scale.
Flight Software Engineer (Starlink Mobile) Space Exploration TechnologiesFlight Software Engineer (Starlink Mobile)Redmond, WA$125,000–$145,000 / yearWe own the full stack from the bare metal microcontroller firmware that drives our custom silicon, to Linux kernels and drivers on our larger CPUs and FPGAs, to the realtime phased array control, network control, and vehicle control that flies our satellites. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.