New Graduate Engineer, Mechanical Starlink Space Exploration Technologies CorpNew Graduate Engineer, Mechanical StarlinkRedmond, WA$100,000–$115,000 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Engineer, Satellites Starlink Space Exploration Technologies CorpMechanical Engineer, Satellites StarlinkRedmond, WA$100,000–$117,500 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Senior Construction Manager - West Region Eaton Corporation PlcSenior Construction Manager - West RegionSeattle, WA$97,000–$156,000 / yearThe Senior Construction Manager - Electrical is responsible for leading the field execution of complex turnkey electrical infrastructure projects, including power distribution, microgrid, renewable energy, and other mission-critical electrical systems across the region. Extensive knowledge of construction safety management programs, including Job Site Safety Analysis (JSA), rigging plans, environmental risk assessments, job audits, confined space procedures, lockout/tagout programs, and regulatory compliance requirements.
Senior Physical Design Engineer Microsoft CorpSenior Physical Design EngineerRedmond, WA$119,800–$234,700 / yearRequired Qualifications: Doctorate in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 1+ year(s) technical engineering experience OR Masters Degree in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 4+ years technical engineering experience OR Bachelors Degree in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 5+ years technical engineering experience OR equivalent experience. To achieve this goal, Microsoft's Compute Silicon & Manufacturing Engineering team is instrumental in defining and delivering operational measures of success for hardware manufacturing, improving the planning process, quality, delivery, scale and sustainability related to Microsoft cloud hardware.
Principal Engineer - Analog and Mixed-Signal Physical Design Microsoft CorpPrincipal Engineer - Analog and Mixed-Signal Physical DesignRedmond, WA$142,800–$274,800 / yearDoctorate in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 3+ years technical engineering experience OR Masters Degree in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 6+ years technical engineering experience OR Bachelors Degree in Electrical Engineering, Computer Engineering, Computer Science, or related field AND 8+ years technical engineering experience OR equivalent experience. The ideal candidate brings deep Fusion Compiler-based physical implementation expertise, strong timing closure and physical verification experience, and sufficient custom layout understanding to partner effectively with analog design and layout teams while directly executing critical implementation and debug work.
Principal Design Verification Engineer Microsoft CorpPrincipal Design Verification EngineerRedmond, WA$142,800–$274,800 / yearThe AI Silicon Engineering (AISiE) SoC Design Verification team is seeking passionate, driven, and intellectually curious silicon verification engineers who can work with cross-discipline teams (including systems, firmware, architecture, design, validation, and product engineering) to develop environment and test cases to verify Microsoft's latest AI accelerators. There is a different range applicable to specific work locations, within the San Francisco Bay area and New York City metropolitan area, and the base pay range for this role in those locations is USD $188,000 - $304,200 per year.
NewSenior Power Electronics & PCB Design Engineer Lead - TeraWave Blue Origin Enterprises LPSenior Power Electronics & PCB Design Engineer Lead - TeraWaveWA$156,802–$219,522.45 / yearMinimum Qualifications: Bachelor's degree in Mechanical, Electrical, Aerospace, or Materials Science Engineering, Physics, or a Bachelor's degree in Electrical Engineering, Computer Engineering, or a closely related field, plus 8 or more years of electronics hardware development experience, including demonstrated team leadership experience spanning technical guidance, performance development, and cross-functional coordination. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Sr. Mechanical Engineer - Avionics Mechanical Packaging - TeraWave Blue Origin Enterprises LPSr. Mechanical Engineer - Avionics Mechanical Packaging - TeraWaveWA$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. You will own mechanical packaging for the Power Management and Distribution (PMAD) Line Replaceable Unit (LRU), including enclosure, card retention, thermal paths, connector access, mounting interfaces, serviceability, mass optimization, producibility, and integration flow.
Substation Protection & Controls (P&C) Engineer JacobsSubstation Protection & Controls (P&C) EngineerSeattle, WAYou will play a crucial role in directly interfacing with utility/developer clients on P&C methodologies and development of design deliverables for utility upgrades including greenfield/brownfield & AIS/GIS substations, offshore wind facilities, developer interconnection facilities. In response, Jacobs is expanding its Transmission & Distribution (T&D) operations In North America and is looking for a Senior Protection & Controls (P&C) Engineer in its Energy & Power Solutions to tackle the complexities of decarbonization and utility modernization to deliver a cleaner and more secure energy future.
Flight Software Engineer III Blue Origin Enterprises LPFlight Software Engineer IIISeattle, WA$150,931–$211,303.05 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewSenior Software Engineer - TeraWave Blue Origin Enterprises LPSenior Software Engineer - TeraWaveSeattle, WA$164,652–$230,512.80 / yearResponsibilities include but are not limited to: Design and develop multi-threaded embedded software in C/C++ to run on Linux/RTOS/Bare-metal platforms, hosted on multi-core SoCs, Implement custom device drivers and management/control/data plane functions for Satellite RF transceivers, Antenna systems and Optical systems on TeraWave's Satellite Payload, Customer terminals and Ground Gateway Terminals. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
NewSenior Software Engineer - TeraWave RF and Optical Systems Blue Origin Enterprises LPSenior Software Engineer - TeraWave RF and Optical SystemsSeattle, WA$164,652–$230,512.80 / yearResponsibilities include but are not limited to: Design and develop multi-threaded embedded software in C/C++ to run on Linux/RTOS/Bare-metal platforms, hosted on multi-core SoCs, Implement custom device drivers and management/control/data plane functions for Satellite RF transceivers, Antenna systems and Optical systems on TeraWave's Satellite Payload, Customer terminals and Ground Gateway Terminals. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Reliability Engineer GreifReliability EngineerTacoma, WashingtonSupport Tacoma mill Management of Change (MOC) processes for capital projects, equipment upgrades, and reliability improvement initiatives by providing engineering expertise during design, installation, commissioning, and startup. The Reliability Engineer partners closely with Operations, Maintenance, Corporate Engineering, contractors, and OEMs to reduce downtime, improve asset life, optimize maintenance effectiveness, and support safe, efficient mill operations.
Manufacturing Engineer Crane Aerospace & ElectronicsManufacturing EngineerLynnwood, WA$88,000–$101,000 / yearInvestigate, recommend, and implement manufacturing cost reduction and product improvement programs + Identify root cause and corrective actions for manufacturing problem + Participate in customer specification and statement of work reviews + Participate in the review and evaluation of new product designs or design changes + Review and analyze design change request initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and verify justification for change + Evaluate, test and select facilities, equipment and materials required for production in conjunction with production supervision, purchasing and other groups + Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions + Develop manufacturing operating instructions + Develop and track manufacturing metrics to monitor the health of processes + Evaluate non-conformances as part of the Material Review Board + Direct work activities of production operators to aid in problem solving + Develop procedures and train assemblers and operators in machine operations, processes or assembly applications + Coordinate with vendors and customers + Ability to identify and prioritize work with limited input from manager + Able to develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR)._ **Preferred Qualification:** + Experience in a regulated manufacturing environment **Working Conditions:** + Working conditions are normal for a manufacturing environment + Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE + May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes + Must be available to work overtime, as needed + Flexible work schedule to support production **Top Benefits:** As a team member at Crane Aerospace and Electronics, you'll enjoy: + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
Project Manager - Electrical Transmission & Distribution (EPC) JacobsProject Manager - Electrical Transmission & Distribution (EPC)Seattle, WALI-CC1 #epjobs #naepjobs Core Competencies * Utility Infrastructure Project Delivery * EPC Contract Management * Project Controls & Financial Oversight * Risk Management * Client Relationship Management * Field & Construction Coordination What Success Looks Like In this role, you will deliver complex electrical infrastructure projects safely, on schedule, and within budget, while strengthening client relationships and advancing the development of critical power systems across North America. The ideal candidate will possess a strong understanding of the technical, commercial, and operational requirements of EPC project delivery, along with a proven ability to manage cross-functional teams in the execution of complex transmission, distribution, and substation projects.
AI-Factory Observability Principal Milestone Technologies IncAI-Factory Observability PrincipalWAYou will design the observability platform that ingests signals from building and electrical systems, server and network fabrics, Kubernetes, and GPU/accelerator clusters - then apply AI/ML models on top of that telemetry to optimize utilization, predict failures, reduce energy cost, and surface insights operators can act on. This role spans facilities/OT telemetry (cooling, power) and IT/AI infrastructure observability (compute, network, accelerators), unified by a single goal: complete, real-time, predictive visibility into how AI infrastructure consumes power, generates heat, moves data, and delivers compute.
IT Systems Engineer Sequoyah ElectricIT Systems EngineerRedmond, WA3+ years’ experience with LAN/WAN, enterprise network equipment, Active Directory, Microsoft Entra ID, Microsoft 365, Intune, virtualization (VMware/Hyper-V/Azure), Docker, SQL, Postgres, cloud telephony (Teams Phone or equivalent), TCP/IP, DNS, network security, and wireless networking. As a full-service electrical and technology contractor, we integrate preconstruction, in-house engineering, and prefabrication to deliver innovative design-build solutions across a wide range of markets.
Lidar and Camera Development Engineer - Lunar Avionics Blue Origin Enterprises LPLidar and Camera Development Engineer - Lunar AvionicsSeattle, WA$130,706–$182,987.70 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a hardworking team, the Lidar and Camera Development Engineer will be a member of the Optical Systems group within Lunar Avionics, working within a tightly knit group that is developing advanced lidar and camera systems across Blue Origin's Lunar vehicles.
Camera and Lidar Optical Development Engineer - Lunar Avionics Blue Origin Enterprises LPCamera and Lidar Optical Development Engineer - Lunar AvionicsWA$107,136–$149,990.40 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a hardworking team, the Camera and Lidar Optical Development Engineer will be a member of the Optical Systems group within Lunar Avionics, working within a tightly knit group that is developing cameras (IR and visible spectrum) and lidar systems across Blue Origin's Lunar vehicles.
Seasonal Maintenance Engineer Schulte Hospitality Group IncSeasonal Maintenance EngineerSeattle, WASHG provides a rewarding, fun and flexible work environment, exciting perks, an atmosphere designed to encourage and promote career growth within the company and a robust benefit package including, but not limited to: Work Today, Get Paid today, with Daily Pay! Our portfolio includes a wide array of reputable brands like Marriott, Hilton, IHG and Hyatt as well as many unique, independent, boutique and lifestyle properties and restaurants.