UNKNOWN

ADAPTED_NOW

YEAR

Bo-Mac Contractors, Ltd. in the Beaumont/ Port Arthur, TX area is offering challenging and exciting career opportunities for a Field Engineer/Surveyor/Rodman. Preference given to candidates with 5 years of Field Engineer/Surveyor/Rodman experience at meets or exceeds performance expectations.

Bo-Mac Contractors, Ltd. in the Beaumont/ Port Arthur, TX area is offering challenging and exciting career opportunities for a Field Engineer/Surveyor/Rodman.  We are seeking qualified candidates that are focused on project success and exceeding customer expectations.  Qualified candidates must be able to perform all duties listed below safely and follow all of the company’s safety procedures.Primary Responsibilities<ul><li>Activities include layout</li><li>Employee must have working knowledge of Total Stations, multiple slope lasers, transit and level</li><li>Environment is exclusively outside, thus the job often involves all weather extremes</li><li>Work requires alert individuals with good balance and moderate physical strength</li><li>The job requires lifting up to 75 pounds on a frequent basis. </li><li>Set up and maintain survey control networks to guide construction activities accurately.</li><li>Conduct topographic, hydrographic, and boundary surveys across various environments (coastal, overwater, land-based).</li><li>Provide precise layout and alignment data to support construction work such as marine structures, ports, and bridges.</li><li>Capture and document actual construction dimensions and features for verification against design specifications.</li><li>Maintain high precision in survey measurements to ensure all construction aligns with project plans and tolerances.</li><li>Work in varying conditions including marine, coastal, and land-based sites, adapting survey methods as required.</li><li>Communicate effectively with engineers, construction managers, and other stakeholders to coordinate survey needs.</li></ul>Minimum Qualifications<ul><li>Must have a TWIC card. </li><li>Constant standing, walking, reaching, crawling, balancing, and grasping. </li><li>Frequent lifting, carrying, climbing, stooping/crouching, and kneeling. </li><li>All aspects of vision are required – acuity, depth perception, and field of vision. </li><li>Ability to talk and hear is very important for communication with supervisor and co-workers on safety and operational matters</li><li>Preference given to candidates with 5 years of Field Engineer/Surveyor/Rodman experience at meets or exceeds performance expectations. </li></ul>What we can offer you:<ul><li>Inclusive Medical, Dental, Vision, Accident, and Illness insurance</li><li>Company paid Disability and Life insurance</li><li>Health Savings Account contribution of up to $1,000 per year</li><li>401(k) retirement savings program with a company match</li><li>Employee Assistance Program including discounts with major vendors & products</li><li>Mental and physical wellness programs</li><li>Competitive time off package including vacation, sick, and holiday pay</li><li>Career advancement opportunities with a stable well-established organization</li><li>Tuition reimbursement program and access to LinkedIn Learning courses</li></ul>*Applicants must be authorized to work in the United States. This position is not eligible for employment visa sponsorship.**CSG/Bo-Mac Contractors, Ltd., does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CSG/ Bo-Mac Contractors, Ltd. without a prior written search agreement will be considered unsolicited and the property of CSG/ Bo-Mac Contractors, Ltd.BoMac Contractors,  Ltd. is an Equal Opportunity Employer. Qualified candidates will be considered without regard to race, sex, disability, veteran status, sexual orientation, or gender identity.

BO-MAC CONTRACTORS LTD.

Field Technician/Surveyor/Rodman - Beaumont/Port Arthur, TX

cbjobsukg

FULL_TIME

FEED

OTHER

Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The Pipeline Technician maintains and operates refined product pipelines, crude oil pipelines, pump stations and all of the associated equipment such as pumps, motor operated valves, pressure switches, electric motors, transmitters, vibration switches, electronic controls and pressure regulators.

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity. The Pipeline Technician maintains and operates refined product pipelines, crude oil pipelines, pump stations and all of the associated equipment such as pumps, motor operated valves, pressure switches, electric motors, transmitters, vibration switches, electronic controls and pressure regulators. Other responsibilities include, but are not limited to: <ul><li> Participate in installing all instrumentation and electrical components safely. </li><li> Troubleshoot problems with control systems and complex equipment associated with electric motors and drives, pumps, compressors; generators, process plants, dehydration, control and pump stations; and gas chromatography. </li><li> Run conduit, pull wire, change motors and maintain lighting systems and basic motor controls. </li><li> Maintain, modify and troubleshoot Distributive Control Systems (DCS) and/or Programmable Logic Controllers (PLC) to maximize use of control technology and minimize installation and operating costs. </li><li> Maintain advanced monitoring devices (gas, flame, or fire detectors, vibration and temperature monitors). </li><li> The ability to read P&ID and electrical diagrams and other complex electrical drawings. </li><li> Interpret plant electrical diagrams. </li><li> Update electrical drawings. </li><li> Install, troubleshoot and maintain end devices, alarms, shutdown systems, process controls, substation and branch feeders, variable frequency drives, air/fuel controllers, panel boards, etc. </li><li> Perform preventative and general maintenance on electronic and pneumatic equipment and parts associated with this equipment. </li><li> Participate and successfully complete training programs, process safety management reviews, and safety meetings required to comply with state and federal regulations. </li><li> Must meet the requirements of the Company's Operator Qualification program to perform identified covered tasks and remain compliant or work under the direct supervision and observation of an individual who has previously been qualified with the Company's and Code of Federal Regulation requirements. </li><li> Provide training and technical support. </li></ul>The successful candidate will meet the following qualifications: <ul><li> A minimum of a high school diploma or G.E.D. equivalent is required. </li><li> Graduation from a technical trade school and/or completion of an apprenticeship, certification or associate degree program in instrumentation or related studies is preferred. </li><li> The ability to read at a level to understand written safety procedures, work procedures, blue prints, P&IDs, work permits, and technical instruction manuals is required. </li><li> Thorough knowledge of electrical codes and is familiarity with AC voltage (120-480) three phase and single phase plus 24 VDC is required. </li><li> Instrumentation and VFD Experience preferred </li><li> A valid driver's license and acceptable driving record are required. </li><li> A minimum of 5 years of electrical and instrumentation experience is required, preferably in a energy related industry. </li><li> Strong mechanical aptitude and dexterity in the use of tools and equipment is required. </li><li> The ability to perform basic mathematical calculations, such as, percentages, ratios and proportions to practical solutions is required. </li><li> Basic computer skills such as: opening, creating and updating content in MS Word documents and Excel spreadsheets is required. </li><li> The ability to assume responsibility, prioritize and respond to multiple tasks under potentially stressful and/or hazardous conditions. </li><li> The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required. </li><li> The ability to modify communication style in order to influence, persuade, negotiate, and engage all parties according to the audience and circumstance is required. </li><li> Takes initiative and is proactive in addressing issues. Quickly and efficiently completes tasks. </li><li> The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company. </li><li> The ability to work in a fast paced environment with less definition, policy, and bureaucracy. </li><li> Works indoors and outdoors in and around industrial and electrical equipment. </li><li> Works in temperature extremes due to weather conditions and operating equipment. </li><li> Uses physical force to lift, push, pull and hold equipment and tools. </li><li> Climbs and works at various heights and may work in a standing, sitting, lying down, crouched or kneeling position. </li><li> Routinely reacts to visual, aural and other signals, including alarms and instructions, and is required to visually inspect work. </li><li> May work in confined spaces (i.e., tanks, between compressors, vessels). </li><li> Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., manually transport a load up to 75 lbs., apply up to 100 foot lbs. of torque. </li><li> Must have ability to get in and out of vehicles regularly and ride over rough roads. </li><li> Must wear special safety equipment while working and must be able to lift and put on emergency breathing apparatus and/or protective equipment. </li><li> The ability to take call-outs and work overtime is required. </li><li> Must live or relocate to within 1 hour of reporting location. </li></ul><img alt=" " height="1" src="https://ars2.equest.com/?response_id=22612134b02f514e022f073a5f7a733b&view" width="1"/>

EPCO Corporate

Technician, Pipeline (Electrical) (Beaumont, TX)

equestftpin

Marine Technician jobs in Beaumont, TX on your radar? Find the best of them right here on Monster.

Marine Technician Jobs in Beaumont, TX

Resume Resources

Get noticed by top employers!

Marine Technician Jobs in Beaumont, TX

Field Technician/Surveyor/Rodman - Beaumont/Port Arthur, TX BO-MAC CONTRACTORS LTD.

Technician, Pipeline (Electrical) (Beaumont, TX) EPCO Corporate

Resume Resources