NewSenior Yield Engineer The Charles Stark Draper Laboratory IncSenior Yield EngineerCambridge, MA$82,300–$220,000 / yearDraper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. Drive new product yield ramps end-to-end: support the development of failure mode and effect analysis and risk reduction, author control plans, establish manufacturing readiness level and transition-to-volume readiness reviews.
Senior Staff Software Engineer, Autonomous Pilot Integration (R5193) Shield AISenior Staff Software Engineer, Autonomous Pilot Integration (R5193)Boston, MAHardware/Software Debugging — Diagnose and resolve integration issues across complex autonomy stacks, payload computers, and embedded systems in lab and field environments — including memory, CPU, and timing profiling under operationally-representative loads. #LI-ED1 #LE Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location.
Senior Hardware Integration and Test Engineer The Charles Stark Draper LaboratorySenior Hardware Integration and Test EngineerCambridge, MassachusettsThe Aiding Technologies Integration & Test Group at Draper is seeking a Senior Integration & Test Engineer with broad technical skills and experience to work in a multidisciplinary environment to conceptualize, build, and test advanced electro-mechanical and electro-optical systems for a wide range of applications including GN&C (Guidance, Navigation and Control) systems, defense, space, and other related areas. Tasking will include leading the development of test plans and procedures, supporting the design and development process (DFT), analysis and evaluation of sensors (custom and COTS) and sensor performance, and the design, manufacture, and implementation of all required supporting test equipment, fixturing, and test scripts.
Senior Integration and Test Engineer The Charles Stark Draper LaboratorySenior Integration and Test EngineerCambridge, MassachusettsSystem I&T Engineers leverage multi-disciplinary engineering expertise and collaborate with other Systems Engineers to establish clear, verifiable, and traceable requirements, inform and drive system concepts, architectures, and designs to promote testability, and utilizes resident expertise and lessons learned to support the development of highly reliable, robust, and complex systems. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Principal Integration and Test Engineer The Charles Stark Draper Laboratory IncPrincipal Integration and Test EngineerCambridge, MA$95,000–$245,000 / yearSystem I&T Engineers leverage multi-disciplinary engineering expertise and collaborate with other Systems Engineers to establish clear, verifiable, and traceable requirements, inform and drive system concepts, architectures, and designs to promote testability, and utilizes resident expertise and lessons learned to support the development of highly reliable, robust, and complex systems. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Principal Design for Manufacturing and Assembly (DfX) Engineer The Charles Stark Draper Laboratory IncPrincipal Design for Manufacturing and Assembly (DfX) EngineerCambridge, MA$95,000–$245,000 / yearJob Description Summary: Join Draper's multidisciplinary engineering team as a Design for Manufacturing and Assembly (DFX) Engineer, where your expertise in device packaging techniques for conventional over-molded electronic parts, multi-chip modules, open / closed MEMs devices and sealed ceramic packages will directly contribute to the success of mission-critical systems in aerospace, defense, and beyond. In this role, you'll work closely with layout and design engineers, supply chain, and internal manufacturing teams to apply DFM/DFA best practices early in the product development cycle, ensuring a smooth transition from design to production.
Associate Staff - Aerospace Engineer Lincoln LaboratoryAssociate Staff - Aerospace EngineerLexington, MA$116,400–$140,000 / yearEngineers work on advanced structural and material systems for space-based imaging and laser communications, thermal management solutions from cryogenic to hypersonic regimes, and aerodynamic design and assessment for unmanned aerial vehicles, airborne pods, and hypersonic platforms. Job responsibilities include building and executing large-scale design analysis of aircraft, presenting technical results to both internal and external audiences, and supporting multiple programs related to aircraft technology development and associated aero/thermal test activities.
Principal Hardware Integration and Test Engineer The Charles Stark Draper LaboratoryPrincipal Hardware Integration and Test EngineerCambridge, MassachusettsThe Aiding Technologies Integration & Test Group at Draper is seeking a Principal Integration & Test Engineer with broad technical skills and a wealth of industry experience to lead/advise teams in a multidisciplinary environment to conceptualize, build, and test advanced electro-mechanical and electro-optical systems for a wide range of applications including GN&C (Guidance, Navigation and Control) systems, defense, space, and other related areas. Tasking will include leading and advising programs and business areas on the best practices for the development of test plans and procedures, supporting the design and development process (DFT), analysis and evaluation of sensors (custom and COTS) and sensor performance, and the design, manufacture, and implementation of all required supporting test equipment, fixturing, and test scripts.
Advanced Robotics Test Engineer, Mechatronics Symbotic IncAdvanced Robotics Test Engineer, MechatronicsWilmington, MA$101,000–$138,600 / yearWhat we do The Robotics Test Engineering team is part of our Hardware Engineering organization, which is responsible for designing, validating, and delivering the robotic systems that power Symbotic's warehouse automation platform. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency.
Senior R&D Electromagnetic Analysis Engineer Commonwealth Fusion SystemsSenior R&D Electromagnetic Analysis EngineerDevens, MAJoin the power movement as a Senior R&D Electromagnetic Analysis Engineer The R&D team’s mission at CFS is to vet potential technical solutions in order to guide the overall SPARC subsystem design, and plan for the technology needs of future fusion power plants and spin-off projects. Incorporating complex multi-physics (heat transfer, fluids, mechanics, etc) system behavior into simplified, elegant network circuit and/or FEA models are also crucial to modelling the multi-physics behavior of superconducting magnets.
R&D Engineer - Magnets Commonwealth Fusion SystemsR&D Engineer - MagnetsDevens, MAThis includes executing development test campaigns for CFS's next-generation NINT magnet technology, and leading RCCA efforts through analysis and testing to resolve issues that may arise with the SPARC NINT magnets currently in production, tokamak integration, and commissioning. It is also the role of the R&D engineer to constantly push and challenge the requirements, risks, and test objectives that they are given to help the combined stakeholders come to a consensus on why the planned test is required and what data is deemed essential for the outcome to be achieved.
Senior R&D Electromagnetic Analysis Engineer Commonwealth Fusion Systems LLCSenior R&D Electromagnetic Analysis EngineerMA$110,000–$185,000 / yearIncorporating complex multi-physics (heat transfer, fluids, mechanics, etc) system behavior into simplified, elegant network circuit and/or FEA models are also crucial to modelling the multi-physics behavior of superconducting magnets. The R&D team's mission at CFS is to vet potential technical solutions in order to guide the overall SPARC subsystem design, and plan for the technology needs of future fusion power plants and spin-off projects.
R&D Engineer - Magnets Commonwealth Fusion Systems LLCR&D Engineer - MagnetsMA$70,000–$120,000 / yearThis includes executing development test campaigns for CFS's next-generation NINT magnet technology, and leading RCCA efforts through analysis and testing to resolve issues that may arise with the SPARC NINT magnets currently in production, tokamak integration, and commissioning. What you'll do: Develop new HTS magnet designs and their associated subsystems, which includes the designing and building R&D test samples, and developing their manufacturing processes and test operations.
NewEngineering Technician Veeco Instruments IncEngineering TechnicianBeverly, MAThis position offers exposure to cutting-edge vacuum process technologies, cross-functional collaboration, and hands-on involvement in bringing new tools from concept to customer-ready systems and is ideal for technicians who enjoy hands-on vacuum equipment work, learning how complex systems behave, and collaborating closely with engineers in a development environment. From the smartphones in our pockets that access the world's collective knowledge, to the cloud-based services where all that information lives, to high-speed wireless communication and computing power needed to drive artificial intelligence, augmented and virtual reality, gaming and so much more, our technology is all around us.
Quality Assurance Engineer-Systems & Automation(Teradyne, N. Reading MA) Teradyne IncQuality Assurance Engineer-Systems & Automation(Teradyne, N. Reading MA)North Reading, MA$100,100–$160,100 / yearAs the company continues to grow and meet increasing market demand, the Quality Engineering team plays a critical role in delivering engineering confidence through system-level validation, automation, and data-driven quality engineering practices. In this role, you will help validate complex semiconductor test systems by evaluating integrated hardware, software, embedded, and mechanical components to ensure they meet functional, performance, reliability, and customer quality expectations.
Project Engineer (Spector) Veeco Instruments IncProject Engineer (Spector)Beverly, MALead engineering change implementation: Run weekly Engineering Change Order (ECO) reviews with contract manufacturers, producing prioritized action plans with defined cut-in points (the specific unit or date at which a design change takes effect in production) for both new-build and sustaining programs. Schedule and risk management: Proven track record of building and maintaining integrated project schedules, identifying critical-path risks, and driving mitigation actions across multiple workstreams simultaneously.
Electromechanical Sustaining Engineer Hydration Labs IncElectromechanical Sustaining EngineerBoston, MA$104,465–$129,045 / yearIn this role, you''ll lead first-pass electrical and firmware investigations, drive root cause and corrective action on electromechanical failures, and act as the technical bridge between our mechanical, electrical, firmware, and software teams. You''ll take sustaining projects from initial analysis through change release - diagnosing problems, scoping the engineering work cleanly, and partnering with the EE and firmware development teams to implement and verify fixes.
Senior Software Engineer - Equipment Controls Seurat Technologies IncSenior Software Engineer - Equipment ControlsWilmington, MA$140,000–$200,000 / yearSeurat's proprietary Area Printing process, developed at Lawrence Livermore National Labs (LLNL), allows metal components to be manufactured at price points and quality levels that compete directly with conventional manufacturing techniques, enabling the reshoring of supply chains and promoting the decarbonization of industry. Integrate and debug industrial automation hardware including EtherCAT I/O, safety interfaces, PMAC/Delta Tau motion systems, PLC interactions, sensors, actuators, lasers, and related machine peripherals.
Twin-Ax Cable Product Engineer Amphenol TCSTwin-Ax Cable Product EngineerNashua, New HampshireAmphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. The Twin-Ax Cable Product Engineer is the technical owner for high-speed copper cable assemblies, responsible for ensuring mechanical reliability, electrical performance, manufacturability, and long-term product integrity.
Optomechanical Engineer QUANTUM COMPUTING, INC.Optomechanical EngineerBedford, MALead packaging design at the component level for EO/OE devices including DFB lasers, optical receivers, fiber-optic components, and photonic integrated circuits (PICs) — from die attach and fiber pigtailing through hermetic sealing. QCi is seeking an Optomechanical Engineer — at a level commensurate with experience — to design and develop precision opto-mechanical assemblies and photonic module packages for Aerospace & Defense and advanced photonics applications.
Senior Principal Application Engineer - Physical Systems Cadence Design Systems IncSenior Principal Application Engineer - Physical SystemsBurlington, MA$99,750–$185,250 / yearEngage early with customers to understand product design and validation workflows, for multi-Body Dynamics including structural analysis (linear/nonlinear FEA, fatigue, durability, crash, NVH) and CFD applications (aerodynamics, thermal management, conjugate heat transfer, multiphase flow) and align simulation solutions to their development processes. Architect end-to-end CAE solution workflows including geometry preparation, meshing strategies, solver setup, Multiphysics coupling, optimization, and post-processing-aligned with customer infrastructure (on-prem HPC, cloud, GPU acceleration).
Manufacturing Engineer (Teradyne, North Reading, MA) TeradyneManufacturing Engineer (Teradyne, North Reading, MA)North Reading, MA$76,500–$115,400 / yearDevelop Manufacturing Process Strategy for outsourced and in-house products Manufacturing fixture design including all fixture design related validations, build, documentation, and handoff to high volume production. ATTENTION APPLICANTS WITH DISABILITIES: If you’re unable to access our on-line application due to a disability you may visit one of our locations or our Corporate Office at 600 Riverpark Drive, North Reading, MA and request a paper application form.
NewSenior Factory Efficiency Engineer VulcanFormsSenior Factory Efficiency EngineerDevensCross-Functional Collaboration : Partner closely with Operations, Quality, and Automation Projects Engineering teams to ensure that new automation cells and 3rd-party machinery integrate seamlessly into real-world factory workflows without disrupting existing throughput. Factory Simulation Model & Value Stream Mapping: Maintain the detailed factory simulation model, including full value stream map, identifying upcoming changes and potential impacts to ensure contingencies are in place to protect operational goals.
Sr. Engineer - System Integration VEIRSr. Engineer - System IntegrationWoburn, MassachusettsBy commercializing next-generation superconducting technology into deployable, real-world systems, VEIR delivers ~10× higher power density than conventional options, enabling “speed-to-power” where incremental optimization falls short. VEIR’s initial focus is AI data centers behind the meter, with solutions engineered for repeatable deployment through reference designs and integrated controls, designed to incorporate learnings as deployments scale.
Principal Electrical Engineer – Proposal Lead RTXPrincipal Electrical Engineer – Proposal LeadMassachusettsExperience adjusting and aligning bids to meet the requirements of various contract types, such as Firm Fixed Price (FFP) and Cost-Plus Fixed Fee (CPFF). As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Principal R&D Sustaining Engineer Job Details | Olympus Corporation Of The Americas OlympusPrincipal R&D Sustaining Engineer Job Details | Olympus Corporation Of The AmericasWestborough, MAAccountable for all aspects of product development activities and product Design History File, such as; requirements creation/documentation, ideation / prototyping, design / development, technical risk mitigation, verification testing and reports, design validation studies, risk management documentation, design reviews, and supports the compilation of documents to enable regulatory submissions. Olympus Corporation of the Americas, a wholly owned subsidiary of Olympus Corporation, is headquartered in Center Valley, Pennsylvania, USA, and employs more than 5,200 employees throughout locations in North and South America.
Senior Performance Engineer Leonardo DRS IncSenior Performance EngineerFitchburg, MA$102,433–$159,027 / yearSeveral factors can influence the pay scale, including but not limited to: Federal contract labor categories and contract wage rates, collective bargaining agreements, geographic location, business considerations, scope, and responsibilities of the position, local or other applicable market conditions, and internal equity. The Leonardo DRS Naval Power Systems business is a trusted provider of innovative naval gas and hybrid power systems, control technology and support solutions for the U.S. Navy and navies around the world.
Principal R&D Sustaining Engineer Olympus CorpPrincipal R&D Sustaining EngineerWestborough, MAAccountable for all aspects of product development activities and product Design History File, such as; requirements creation/documentation, ideation / prototyping, design / development, technical risk mitigation, verification testing and reports, design validation studies, risk management documentation, design reviews, and supports the compilation of documents to enable regulatory submissions. Olympus Corporation of the Americas, a wholly owned subsidiary of Olympus Corporation, is headquartered in Center Valley, Pennsylvania, USA, and employs more than 5,200 employees throughout locations in North and South America.
Sr. Engineer, Sustaining R&D Job Details | Olympus Corporation Of The Americas OlympusSr. Engineer, Sustaining R&D Job Details | Olympus Corporation Of The AmericasWestborough, MAContributes to all aspects of product development activities and product Design History File, such as requirements creation/documentation, ideation / prototyping, design / development, technical risk mitigation, verification testing and reports, design validation studies, risk management documentation, design reviews, and supports the compilation of documents to enable regulatory submissions. Olympus Corporation of the Americas, a wholly owned subsidiary of Olympus Corporation, is headquartered in Center Valley, Pennsylvania, USA, and employs more than 5,200 employees throughout locations in North and South America.
Sr. Manufacturing Process Development Engineer, Consumer Technology VulcanFormsSr. Manufacturing Process Development Engineer, Consumer TechnologyDevensData-Driven Optimization: Design and execute complex Design of Experiments (DOE) using statistical software (such as Minitab or JMP) to analyze process capability ($C_p/C_{pk}$), drive continuous yield improvements, and minimize scrap rates. Recipe & Parameter Development: Pioneer and refine high-temperature thermal recipes, laser interaction parameters, and advanced printing strategies to meet strict mechanical properties, surface finish requirements, and microstructural tolerances.
Operations Quality Engineer 2nd shift - onsite Andover, MA RTXOperations Quality Engineer 2nd shift - onsite Andover, MAMassachusettsTypically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience Relevant experience is working within electrical engineering, mechanical engineering, system engineering, manufacturing/industrial engineering or supplier engineering. Lead/Drive Advanced Product Quality Planning (APQP) initiatives (PFMEA, control Plans, SPC, etc.) using baseline metrics and future demand with the ability to perform verification/validation of improvements and efficiencies to facilitate defect prevention.
Senior Solutions Engineer Oxipital AISenior Solutions EngineerBedford, MAServe as the primary point of contact for project execution, facilitating clear, proactive communication between customers, integrators, and internal leadership to ensure expectations, deliverables, and technical requirements are fully aligned Provide transparent project progress updates and milestone reporting to Oxipital AI senior management, identifying potential risks or delays early and proposing actionable solutions to maintain delivery commitments. Manage large-scale capital equipment and robotics projects from concept through delivery, developing detailed project plans, schedules, and risk mitigation strategies while coordinating communication between Oxipital AI, integrator partners, and key customer stakeholders to ensure seamless execution and successful outcomes.
Senior Field Applications Engineer Oxipital AISenior Field Applications EngineerBedford, MAServe as the primary point of contact for project execution, facilitating clear, proactive communication between customers, integrators, and internal leadership to ensure expectations, deliverables, and technical requirements are fully aligned Provide transparent project progress updates and milestone reporting to Oxipital AI senior management, identifying potential risks or delays early and proposing actionable solutions to maintain delivery commitments. Manage large-scale capital equipment and robotics projects from concept through delivery, developing detailed project plans, schedules, and risk mitigation strategies while coordinating communication between Oxipital AI, integrator partners, and key customer stakeholders to ensure seamless execution and successful outcomes.
Industrial Automation Applications Engineer - Machine Vision Oxipital AIIndustrial Automation Applications Engineer - Machine VisionBedford, MAServe as the primary point of contact for project execution, facilitating clear, proactive communication between customers, integrators, and internal leadership to ensure expectations, deliverables, and technical requirements are fully aligned Provide transparent project progress updates and milestone reporting to Oxipital AI senior management, identifying potential risks or delays early and proposing actionable solutions to maintain delivery commitments. Manage large-scale capital equipment and robotics projects from concept through delivery, developing detailed project plans, schedules, and risk mitigation strategies while coordinating communication between Oxipital AI, integrator partners, and key customer stakeholders to ensure seamless execution and successful outcomes.
Senior Solutions Engineer - Robotics & Machine Vision Oxipital AISenior Solutions Engineer - Robotics & Machine VisionBedford, MAServe as the primary point of contact for project execution, facilitating clear, proactive communication between customers, integrators, and internal leadership to ensure expectations, deliverables, and technical requirements are fully aligned Provide transparent project progress updates and milestone reporting to Oxipital AI senior management, identifying potential risks or delays early and proposing actionable solutions to maintain delivery commitments. Manage large-scale capital equipment and robotics projects from concept through delivery, developing detailed project plans, schedules, and risk mitigation strategies while coordinating communication between Oxipital AI, integrator partners, and key customer stakeholders to ensure seamless execution and successful outcomes.
Manufacturing Engineer III Parker Hannifin CorpManufacturing Engineer IIIHollis, NHEngineering Design Support Partners with engineering leadership to influence product and process designs, recommending manufacturable concepts and requirements that best leverage available equipment and manufacturing methods. Position Summary: Manufacturing Engineer III is an advanced role responsible for designing, implementing, validating, and continuously improving manufacturing processes, work instructions, and production equipment across one or more facilities.
NewIndustrial Automation Applications Engineer - Machine Vision - Dallas, TX must relocate to Boston area Oxipital AIIndustrial Automation Applications Engineer - Machine Vision - Dallas, TX must relocate to Boston areaBoston, MAServe as the primary point of contact for project execution, facilitating clear, proactive communication between customers, integrators, and internal leadership to ensure expectations, deliverables, and technical requirements are fully aligned Provide transparent project progress updates and milestone reporting to Oxipital AI senior management, identifying potential risks or delays early and proposing actionable solutions to maintain delivery commitments. Manage large-scale capital equipment and robotics projects from concept through delivery, developing detailed project plans, schedules, and risk mitigation strategies while coordinating communication between Oxipital AI, integrator partners, and key customer stakeholders to ensure seamless execution and successful outcomes.
Senior Technical Solutions Engineer Oxipital AISenior Technical Solutions EngineerBedford, MAServe as the primary point of contact for project execution, facilitating clear, proactive communication between customers, integrators, and internal leadership to ensure expectations, deliverables, and technical requirements are fully aligned Provide transparent project progress updates and milestone reporting to Oxipital AI senior management, identifying potential risks or delays early and proposing actionable solutions to maintain delivery commitments. Manage large-scale capital equipment and robotics projects from concept through delivery, developing detailed project plans, schedules, and risk mitigation strategies while coordinating communication between Oxipital AI, integrator partners, and key customer stakeholders to ensure seamless execution and successful outcomes.
Senior Automation Solutions Engineer Oxipital AISenior Automation Solutions EngineerBedford, MAServe as the primary point of contact for project execution, facilitating clear, proactive communication between customers, integrators, and internal leadership to ensure expectations, deliverables, and technical requirements are fully aligned Provide transparent project progress updates and milestone reporting to Oxipital AI senior management, identifying potential risks or delays early and proposing actionable solutions to maintain delivery commitments. Manage large-scale capital equipment and robotics projects from concept through delivery, developing detailed project plans, schedules, and risk mitigation strategies while coordinating communication between Oxipital AI, integrator partners, and key customer stakeholders to ensure seamless execution and successful outcomes.
Sr. Engineer, Sustaining R&D Olympus CorpSr. Engineer, Sustaining R&DWestborough, MAContributes to all aspects of product development activities and product Design History File, such as requirements creation/documentation, ideation / prototyping, design / development, technical risk mitigation, verification testing and reports, design validation studies, risk management documentation, design reviews, and supports the compilation of documents to enable regulatory submissions. Olympus Corporation of the Americas, a wholly owned subsidiary of Olympus Corporation, is headquartered in Center Valley, Pennsylvania, USA, and employs more than 5,200 employees throughout locations in North and South America.
Staff Reliability Engineer Symbotic IncStaff Reliability EngineerWilmington, MA$125,000–$171,600 / yearApplying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. Your job will be to lead reliability engineering activities across new and existing robotic platforms, ensuring products meet performance, durability, and lifecycle expectations throughout development and production.
Field Application Sales Engineer Amphenol PCD, Inc.Field Application Sales EngineerBeverly, MA$82,000–$92,000 / yearSPIN TACT provides highly engineered rotary interconnect solutions, including electrical slip rings, RF and waveguide rotary joints, fiber-optic rotary joints and integrated fluid-transfer technologies. With facilities in North America and Asia, Amphenol Pcd products are chosen by hundreds of OEMs around the world reliant on Amphenol's technical excellence, global network of distributors, and cost-effective solutions for custom systems.
Hardware Reliability Engineer II (R4675) Shield AIHardware Reliability Engineer II (R4675)Boston, MALI-JM2 #LB Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. In this role, you will contribute to environmental and stress testing efforts, support failure analysis investigations, and help analyze test and field data to identify potential reliability risks.
Lead Manufacturing Integration Engineer Seurat TechnologiesLead Manufacturing Integration EngineerWilmington, MA$130,000–$150,000 / yearSeurat’s proprietary Area Printing process, developed at Lawrence Livermore National Labs (LLNL), allows metal components to be manufactured at price points and quality levels that compete directly with conventional manufacturing techniques, enabling the reshoring of supply chains and promoting the decarbonization of industry. This role is responsible for guiding new products from concept through production release, collaborating across engineering, manufacturing, quality, and commercial teams to deliver innovative, manufacturable, and cost-effective solutions.
Senior Software Engineer, Autonomy Behaviors (R4588) Shield AISenior Software Engineer, Autonomy Behaviors (R4588)Boston, MALC #LI-ED1 Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. The team is responsible for developing autonomous behaviors within Shield AI’s industry-leading mission autonomy software stack and deploying them across a breadth of platforms, including the Anduril Fury, Northrup Grumman Talon, Shield AI V-Bat, and other first and third-party autonomous vehicles.
Energy Engineer Resource InnovationsEnergy EngineerNeedham, MA$70,000–$95,000 / yearFamiliarity with common operational energy conservation measures, including scheduling optimization, setpoint adjustments, supply air temperature reset, static pressure reset, chilled water and hot water reset, economizer optimization, demand control ventilation, and other HVAC control strategies. Activities may include installing data loggers, collecting BAS trend data, performing functional performance tests, capturing BAS screenshots and equipment photos, reviewing equipment operation, and discussing implementation details with customers and contractors.
Manufacturing Engineer - Machining Operations Seurat TechnologiesManufacturing Engineer - Machining OperationsWilmington, MA$85,000–$120,000 / yearSeurat’s proprietary Area Printing process, developed at Lawrence Livermore National Labs (LLNL), allows metal components to be manufactured at price points and quality levels that compete directly with conventional manufacturing techniques, enabling the reshoring of supply chains and promoting the decarbonization of industry. The position combines hands-on machining and CNC programming with post-processing, fixture and tooling design, manufacturing strategy, capital equipment planning, and continuous improvement.
NewSenior Product Integrity Engineer - Outdoor Heated SharkNinja Operating LLCSenior Product Integrity Engineer - Outdoor HeatedNeedham, MA$84,000–$115,000 / yearPowered by two trusted, global brands, Shark and Ninja, the company has a proven track record of bringing disruptive innovation to market and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Powered by two trusted, global brands, Shark and Ninja, the company has a proven track record of bringing disruptive innovation to market and developing one consumer product after another that has become the number one brand in its category.
Hvac Engineer, Facilities Ocular TherapeutixHvac Engineer, FacilitiesBedford, MA$107,000–$123,000 / yearPosition Summary: The HVAC Engineer, Facilities will be responsible for the design, operation and maintenance of GMP and non-GMP Heating Ventilation and Air Conditioning (HVAC) equipment and systems in support of formulation, development and commercialization of innovative therapies at a GMP biopharmaceutical manufacturing plant. Principal Duties and Responsibilities: Oversee the design, specification and selection of HVAC and Air Handling Units (AHU) for GMP manufacturing clean rooms, Quality Control (QC) labs, warehouses, as well as for general facilities, non-GMP, office and amenities.
Refrigeration Engineer City Building Engineering ServicesRefrigeration EngineerBurlington, MassachusettsThe Refrigeration Engineer reports to the Refrigeration Engineering Manager and is responsible for the design and preparation of plans and specifications for the installation of supermarket refrigeration equipment and systems for new store, store remodel and capital maintenance projects. Utilizing our vast array of in-house resources, CBES experts tackle the most challenging projects from inception to completion, including project design, engineering, construction and commissioning.