Full time LVL II NDT Technicians- Richmond, VA Mistras Group Inc. - ServicesFull time LVL II NDT Technicians- Richmond, VAMidlothian, VA$25–$40 / hourPart timeThe ideal candidate will have prior nondestructive testing experience in industrial, manufacturing, refinery, power generation, or related environments and possess a strong commitment to safety, quality, and technical excellence. Candidates must be capable of setting up inspection equipment, interpreting results, and preparing accurate documentation while working independently and as part of a team.
Certified Welding Inspector (CWI) Technician - Full Time or Temp Mistras Group Inc. - ServicesCertified Welding Inspector (CWI) Technician - Full Time or TempAtlanta, GAPart timeThe NDT CWI Inspector will perform visual welding inspections and support NDT operations in industrial, manufacturing, pipeline, refinery, power generation, or construction environments. Note to Applicants: Smoking is prohibited in all indoor areas of the Company unless designated smoking areas have been established by a particular location in accordance with applicable state and local law.
Food and Nutrition Catering Associate - Patient Meal Service Assistant - Full Time (12 hr shifts, 6:30a - 6:30p, E/0 Weekend, Rotating Holidays) Frederick Health Hospital, Inc.Food and Nutrition Catering Associate - Patient Meal Service Assistant - Full Time (12 hr shifts, 6:30a - 6:30p, E/0 Weekend, Rotating Holidays)Frederick, MD$17.69–$23.08 / hourPart timePatient menu selections for lunch are not taken more than 1-1/2 hours prior to workstation tray assembly time and for dinner are not taken more than 2 hours prior to workstation tray assembly time. Awkward postures include repeated or prolonged reaching, twisting, bending, kneeling, squatting, working overhead with your hands or arms, or holding fixed positions.
Full Time Maintenance Technician- Weekend Shift / 1st Shift Oats Overnight IncFull Time Maintenance Technician- Weekend Shift / 1st ShiftWest Chester Township, OH$35–$37 / hourPart timeFrom executing preventive maintenance across electrical, mechanical, and HVAC systems to hands-on facility work and equipment troubleshooting, this role covers a lot of ground — and that's what makes it great. Since 2016, our high-protein, drinkable oatmeal has reached over a million customers through direct-to-consumer, and we’re now scaling with all major nationwide retail and club partners.
Facilities Technician II - Dollywood's DreamMore Resort & Spa - Full Time Year Round The Dollywood CompanyFacilities Technician II - Dollywood's DreamMore Resort & Spa - Full Time Year RoundPigeon Forge, TN$19.50 / hourPart timeCognitive and Sensory Requirements : This position requires strong cognitive skills, including the ability to think critically, solve problems, process and retain information, have attention to detail and communicate effectively using approved communication methods. Additionally, the ideal candidate will be able to display and live out Lead with Love qualities, strongly rooted in the Dollywood Company culture, by being patient, kind, trusting, unselfish, truthful, forgiving, dedicated and accountable.
NewFull Time Facility Maintenance Technician- Weekend Shift / 1st Shift Oats Overnight IncFull Time Facility Maintenance Technician- Weekend Shift / 1st ShiftWest Chester Township, OH$35–$37 / hourPart timeThis is a role where the breadth of the work is what makes it great - no two days are the same, your contributions are visible, and you'll be part of a team that takes real pride in keeping the operation humming. Since 2016, our high-protein, drinkable oatmeal has reached over a million customers through direct-to-consumer, and we're now scaling with all major nationwide retail and club partners.
NewProcurement Manager Barnes Group Inc.Procurement ManagerOgden, UTPart timeConfers with suppliers and analyzes suppliers' operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. · Leading Global Purchase Family or Regional Commodity specific sourcing with full accountability for buy and meeting material deflation targets by setting strategic direction for global or regional sourcing professionals.
Product Validation Engineer Rogers Freels & Associates IncProduct Validation EngineerFuquay-Varina, NC$65,000–$80,000 / yearPart timeOur work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. RFA Engineering ( www.rfamec.com ) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise.
Weld Engineer - Electron Beam Janicki Industries, Inc.Weld Engineer - Electron BeamSedro Woolley, WA$83,000–$145,000 / yearPart timeAdditionally, because of Janicki’s work on aerospace products and the high volume of safety sensitive positions, Janicki takes the safety of its employees very seriously and requires that employees pass a preemployment drug test prior to starting employment. Across every role, from engineers and technicians to operations and support teams, our people help solve challenging problems, push the limits of design and manufacturing, and create solutions that make a lasting impact.
Sr Technical Sourcing Specialist PowerSecure, Inc.Sr Technical Sourcing SpecialistDurham, NCPart timeLead supplier qualification and development programs that support fabrication and manufacturing processes while collaborating closely with engineering, quality, operations, and manufacturing leaders to align sourcing decisions with product requirements, business priorities, and evolving market conditions to align supplier strategy. Strong financial acumen with demonstrated capability in total cost ownership and analysis, negotiation strategy, supplier risk, lead-time drivers, commodity market dynamics, and evaluation of commercial tradeoffs that impact sourcing decisions and long-range supply strategy.
Senior Tooling Engineer Milwaukee Electronics CorporationSenior Tooling EngineerMilwaukee, WIPart timeFabricate completed designs in MEC's machine shop using a full complement of manual and additive equipment — including manual mill and lathe; shear and manual press brake for sheet metal; FDM (Bambulab) and SLA (Formlabs) 3D printers; bandsaws, drill presses, tapping machine, hydraulic knockout punches, surface grinder, and a wide range of hand tools. Collaborate closely with Test Engineering to develop test fixture mechanicals — including but not limited to PCBA/DUT locating features, tooling-pin selection, pogo pin layout, single- or dual-sided board access, test actuation mechanism, and enclosures for test equipment.
Director, Quality Assurance Aquestive Therapeutics Inc.Director, Quality AssurancePortage, INPart timeProvide strategic direction and leadership to ensure effectiveness of Quality Systems (e.g., CAPA, Change Management, Event Management, Supplier Quality, Internal Audit, Document Management, Risk Management, Record Review and Product Disposition, Training, Field Alert/Recall, etc.). The Director of Quality Assurance will work with their direct managerial reports, as well as Executive Leadership, to ensure a continued state of compliance while promoting a strong quality culture across the organization for all products, spanning early phase development to commercialization.
Chemline Technician III (1st Shift) Semiconductor Services Business USChemline Technician III (1st Shift)Phoenix, AZPart timeThe Chemline Technician III performs advanced chemical processing, cleaning, coating, etching, and surface treatment of semiconductor chamber components within UCT's Advanced Technology Cleaning Centers (ATCC). The Technician III serves as an experienced process resource, supporting troubleshooting, process improvements, and training activities while helping drive safety, quality, throughput, and on-time delivery in a semiconductor manufacturing environment.
NewTechnician III Semiconductor Services Business USTechnician IIIPhoenix, AZPart timeThe Chemline Technician III performs advanced chemical processing, cleaning, coating, etching, and surface treatment of semiconductor chamber components within UCT's Advanced Technology Cleaning Centers (ATCC). The Technician III serves as an experienced process resource, supporting troubleshooting, process improvements, and training activities while helping drive safety, quality, throughput, and on-time delivery in a semiconductor manufacturing environment.
ENGINEER II-MFG Dassault Falcon Jet CorpENGINEER II-MFGLittle Rock, AR$70,738–$94,502.50 / yearPart timeNote, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Develop and maintain routings and Manufacturing Bill of Material (MBOM) for multiple complex, system-level aircraft assemblies / installations to ensure all parts defined by Engineering are Included in an efficient manufacturing execution system plan.
MSAT CDMO Manager Lantheus Medical Imaging IncMSAT CDMO ManagerSpringfield, NJ$111,000–$185,000 / yearPart timeThe MSAT CDMO Manager provides technical and people leadership for MSAT activities supporting pharmaceutical and/or radiopharmaceutical drug product manufacturing across internal and external manufacturing networks. The MSAT CDMO Manager leads MSAT staff, interfaces with senior stakeholders, and ensures delivery of technically sound and compliant manufacturing solutions.
NewQuality Inspection Team Lead Milegon LLCQuality Inspection Team LeadCanby, ORPart timeResponsibilities include providing coverage during absences, onboarding and training employees, ensuring completion of required training, coaching team members, resolving quality and process issues, and partnering with the Shift Supervisor, Quality, Production, and Engineering when escalation or additional support is needed. Performs advanced visual inspections of printed circuit boards, electronic components, subassemblies, box-build assemblies, and incoming materials using Automated Optical Inspection (AOI), magnification lamps, microscopes, and other inspection tools.
Continuous Improvement Specialist Davis Wire CorporationContinuous Improvement SpecialistIrwindale, CA$133,000–$151,000 / yearPart timeWorking closely with Production, Maintenance, Engineering, Quality, and Supply Chain, the role drives World Class Manufacturing (WCM), Lean Manufacturing, and continuous improvement by eliminating waste, optimizing manufacturing processes, implementing the plant's operational roadmap, and leading cultural change to achieve sustainable operational excellence. Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.
NewQuality Engineer I Semiconductor Services Business USQuality Engineer IScarborough, MEPart timePerforms statistical analysis to analyze trends, and works with site functions to investigate trends, conduct root cause analysis and recommend corrective actions for processes and products. The Quality Engineer plans and coordinates quality activities in conjunction with the Site Quality Head to ensure all components, processes, and products satisfy technical requirements.
Application Engineer - PT Components & Bulk Material Handling Dodge Industrial, Inc.Application Engineer - PT Components & Bulk Material HandlingSimpsonville, SCPart timeYou will support both internal and external customers by leading traditional Application Engineering projects and working to enhance overall engineering performance. You will stay abreast of state-of-the-art technology and Dodge products, identifying technical and financial drivers for product solutions.