PART_TIME

FEED

UNKNOWN

Mig Welders operates robots, use machine lifts , must be Mig Weld certified per classroom training, written test and coupon samples and inspects repairs parts to the required specification requirements(Premium Position), Bender operators run equipment, review part quality and make machine adjustments to ensure part quality based upon part dimensional aspects (Premium Position), Roll Mill may participate in die sets and part adjustments for quality purposes (Premium Position). The Team Member is responsible for the essential job functions and the job qualification requirements for the following jobs: Roll Mill, Prog Operator, Press Operator, Arc Welding Machine Operator, Resistance Welding Operator, and Automatic Welding Machine Operator and CNC Benders.

POSITION SUMMARY:<ul><li>Under the supervision of the Area Manager/ Team Leader is responsible for the essential functions, and job qualifications requirements such as proper training and safe, timely, and efficient operation of the general production equipment.</li></ul>ESSENTIAL JOB FUNCTIONS:<ul><li>The Team Member is responsible for the essential job functions and the job qualification requirements for the following jobs: Roll Mill, Prog Operator, Press Operator, Arc Welding Machine Operator, Resistance Welding Operator, and Automatic Welding Machine Operator and CNC Benders.</li><li>Keeps work area clean, neat, orderly, and possess good housekeeping techniques.</li><li>Produces quality parts which meet all customer requirements. With the approval of the Area Manager/ Team Leader and Q.C. Manager, the employee is authorized to cease production, if parts do not meet quality standards.</li><li>Involved in process improvement teams working with parts.</li><li>Follows operator instruction sheets as specified, unless otherwise instructed by a the Area Manager</li><li>Adheres to all safety regulations and report any safety concerns to the Area Manager/Team Leader</li><li>Reports all mishits to the Team Leader/ Area Manger.</li><li>Completes all paperwork accurately, this includes tags, setup check lists, Production Logs/ Flip Charts & production reports.</li><li>Ensure last piece samples have been submitted before starting the next order.</li><li>Properly uses the Plex system for production reporting and/or job training requirements.</li><li>Follows all quality procedures</li><li>Ensure that all containers not damaged and clean of old tags, cardboard, and other parts before they are used.</li><li>Verifies the proper use of standard packs when they are set up for work orders.</li><li>Trains new associates as directed by supervisor.</li><li>Follows the “first-in, first out” system of using raw materials.</li><li>Completes all requirements to satisfy the First Piece Inspection Process.</li><li>Mig Welders operates robots, use machine lifts , must be Mig Weld certified per classroom training, written test and coupon samples and inspects repairs parts to the required specification requirements(Premium Position),</li><li>Bender operators run equipment, review part quality and make machine adjustments to ensure part quality based upon part dimensional aspects (Premium Position),</li><li>Roll Mill may participate in die sets and part adjustments for quality purposes (Premium Position).</li><li>Prog Operators participate in die sets, setting machine to parameters and trouble shoot equipment including dies to ensure part quality standards including First Piece and Last Hit (Premium Position).</li><li>Transfer Press Operators perform die sets, adjusts machine to parameters, trouble shoot equipment to ensure part quality standards (Premium Position),</li><li>Shearline Operators participate in die sets, coil alignment, setting machine to parameters and trouble shoot equipment to ensure part quality strands including First Piece (Premium Position).</li><li>Performs other essential functions as assigned.</li></ul>JOB QUALIFACTIONS REQUIREMENTS:<ul><li>High School Diploma, G.E.D. or the equivalent preferred.</li></ul>SPECIAL SKILLS:<ul><li>Experience in a manufacturing environment helpful but not required.</li></ul> MAJOR PHYSICAL AND MENTAL REQUIREMENTS:<ul><li>The employee must be able to stand on the concrete floor for the duration of the work shift, walk, push, pull, reach overhead, bend to the floor and use their arms and hands. Visual precision is needed for visually inspecting parts for quality at production equipment speed and for reading documents, machine gauges and precision measuring equipment.</li></ul>WORKING CONDITIONS:<ul><li>The employee will work in a manufacturing/stamping plant. Hazards may result from loud noises from operating equipment, physical dangers associated with moving equipment and machine parts, breathing of fumes and dust and skin exposure to oils and other fluids.</li></ul>TEAM MEMBER/ PRODUCTION <ul><li>Employee must be able to exert up to 50 pounds of force occasionally and repetitively lift up to 35 pounds from and to a height of 10-56 inches for the work shift.</li></ul> TRAILER HITCH / MIG WELD TEAM MEMBER<ul><li>The employee must be able to lift up to 60 pounds from and to a height of 10-56 inches up to one time a minute for the work shift.</li></ul>BALANCE OF TEAM MEMBERS INCLUDING CONTAINMENT AREA:<ul><li>Employee must be able to exert up to 40 pounds of force repetitively from and to a height of 10-56 inches up to four times a minute for the work shift. The employee must be able to exert up to 55 pounds of force occasionally, from and to a height of 10-56 inches.</li></ul> Employee may be hired to work in a specific area; however, all employees are expected to be able to work in all production areas in order to promote productivity, quality and safety.

Lakepark Industries of Indiana, Inc.

Production Associate - STARTING AT $19.40 ($20.40 FOR 2ND)

Arc Welding

CNC (Computerized Numerical Control) Systems

Concrete

Housekeeping/Cleaning

Identify Issues

Lift/Move 35 Pounds

Lift/Move 40 Pounds

Manufacturing

Order Processing

Process Improvement

Quality Metrics

Regulatory Reports

Resistance Welding

Team Lead/Manager

Time Management

Training/Teaching

Welding

AM General Hourly employees are represented by the UAW and together the Company and the Union strive to create a working environment that supports and develops it workforce. Communicate effectively with other employees in assigned zone and attend all zone meetings, problem solving sessions, training, etc.

WEEK

AM General is hiring Production Employees to support our HMWWV and JLTV A2 production.  AM General Hourly employees are represented by the UAW and together the Company and the Union strive to create a working environment that supports and develops it workforce.Requirements & Skills:<ul><li>Must be able to work on a contract basis for the first 30 days.  That time will be credited toward any benefits with a time worked requirement</li><li>Must be able to read and follow standardized work and job instructions</li><li>Must have basic computer skills</li><li>Previous manufacturing experience is preferred</li><li>Must be able to lift at least 50 lbs.</li><li>Ability to work in a fast-paced environment</li><li>Maintain regular attendance and punctuality</li><li>Communicate effectively with other employees in assigned zone and attend all zone meetings, problem solving sessions, training, etc.</li><li>May be required to learn multiple jobs</li><li>Must be able to use assigned hand tools, power tools, and torque tools</li><li>Shift start time 5:00 am</li></ul>Primary Duties Include:<ul><li>Assemble/drill parts in accordance with standardized work and job instructions</li><li>Confirm quality of work performed</li><li>Technical capacity to run equipment within the facility</li><li>Must be able to use assigned hand tools, power tools, and torque tools</li><li>May operate material handling equipment including forklifts</li><li>Works and communicates with other employees</li><li>Perform job duties in a safe and efficient manner and in compliance with safety rules</li><li>Maintain clean working environment</li></ul>Benefits<ul><li>Medical Insurance choice of PPO’s or HDHS</li><li>Costs range from $0-$69 weekly for single through family coverage based on plan chosen</li><li>Dental/ Vision Insurance</li><li>401(k) plan with company match</li><li>401(k) Automatic company contribution</li><li>AM General Defined Benefit Plan</li><li>Vacation</li><li>Average 15 holidays per year-including the last week of the year.</li><li>Basic Life Insurance</li><li>Safety Shoe program</li><li>Tuition reimbursement for eligible classes</li><li>EAP Program</li><li>Christmas Bonus</li><li>Profit Sharing Bonus</li></ul>WagesNew Hire Production    $20.86New Hire Materials       $19.25New Hire Quality            $19.25

Part Time Production Jobs in Mishawaka, IN

Resume Resources

Get noticed by top employers!

Part Time Production Jobs in Mishawaka, IN

Production Associate - STARTING AT $19.40 ($20.40 FOR 2ND) Lakepark Industries of Indiana, Inc.

Production Operator/ Assembler AM General LLC

Resume Resources