UNKNOWN

FEED

A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.).

Pipefitter – 1st Class A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications. The Pipe Fitter journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Long term projectHousing assistance availableGreat Hours with overtime pay M-Th = 10 hours / Fri = 8 hours PLUS some Sats & SunPer-diem available for those that qualifyCall Clara for full details – (787) 360-2397 Se Habla Español – Pipe fitters para proyecto en Florida QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence. 2. Must have a comprehensive knowledge of ship construction. 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action. 5. Must have a thorough knowledge of experience with P-73 joint fit-up. 6. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals. 7. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting. 8. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work. 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems. 10. Must at have at least Three (3) years of pipefitting shipyard experience.

Labor One Staffing

Now Hiring Pipe Fitters

Corrective Action

Hand Tools

Hydraulic Engineering

Metrics

OSHA

Piping

Crelate

ADAPTED_NOW

4. Assemble and install instrument stands, brackets, trays, clamps and hangers as required to properly secure instrumentation and other associated components. Physically able to work within a construction environment; including extensive walking, climbing, confined spaces, elevated work areas and lifting of tools and equipment up to 40lbs.

21751BR Job Title: Instrument Fitter Journey Job Description: 1. Adhere to established company policies and procedures paying special attention to safety regulations. 2. Assemble, mount and installs control panels, instruments, associated sensing devices that measure, indicate, transmit, record and control. 3. Plan layout and installation in accordance with manufacture instructions, specifications, issued design details and drawings. 4. Assemble and install instrument stands, brackets, trays, clamps and hangers as required to properly secure instrumentation and other associated components. 5. Measures, cuts, threads and installs small bore piping typically associated with pneumatic and hydraulic systems. 6. Must have extensive tubing bending and installation experience. 7. Perform pressure testing of installed tubing and small bore pipe as required to prove integrity of system. 8. Able to read drawings; P&IDs, Details, Location, Schematics, Isometrics, etc. 9. Works in a timely manner, accurately and, maintains an orderly and clean work area. 10. Performs regular maintenance and cleaning of tools, equipment and instrumentation (both installed and pre-installed). 11. Prepare and record QC installation documents, perform installation inspections with Engineers and Client as per Installation Testing Procedures (ITPs). 12. Physically able to work within a construction environment; including extensive walking, climbing, confined spaces, elevated work areas and lifting of tools and equipment up to 40lbs. 13. Typically has 48 months of industrial construction experience. Auto req ID: 21751BR Project Name: Port Arthur LNG Location: Port Arthur, Texas Shift: Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to acesstmt@bechtel.com or call +1-800-749-2372 for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

Bechtel Corporation

Instrument Fitter Journey

Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and safety toe work boots . Position Responsibilities: Selects equipment and plans layouts, assembly, and welding of pipe applying knowledge of geometry, physical properties of metals to be assembled, metals machining, weld shrinkage, and welding techniques .

<h5>Industrial Mechanical Welders And Combination Welders </h5>Richard Construction Inc. (RCI) is currently seeking experienced Industrial Mechanical Welders and Combination Welders. A Combination Welder will weld, fabricate, and assist pipe fitters in installation of varying types of industrial pipe into the projects piping systems. This position will also require assisting fitters, riggers/rigging, and knowledge of process piping. Combination Welders and Mechanical Welders will also weld piping attachments, vessels, furnace shells, tanks, structural steel, or any metal that requires joining by welding processes. RCI has various levels of welder positions based on experience and skills ranked as follows: <ul><li>Welder Leadman: Certified Welder with 5+ years of experience. Proficient in welding carbon steel, chromes, and stainless steel materials, of various wall thicknesses, with minimal Non-Destructive Examination (NDE) rejections. </li><li>Welder I: (Combo Welder) Certified Welder with 3+ years of experience. Welds fabricated cast, rolled, and forged components to assemble structural forms such as tanks, pressure vessels, furnace shells, and the pressure boundary of piping and associated piping attachments. Proficient in welding carbon steel, chromes, and stainless steel materials with various welding processes. </li><li>Welder II: Same as Welder I with 95% competency rating or greater and at least 2+ years of experience. </li><li>Welder III: AWS D1.1 structural steel Certified. Preferred minimum of 1 year industrial experience. Welds together structural metal components as specified by drawings, work orders, or oral instructions, utilizing knowledge of metallic and non-metallic materials including the specifications of the particular equipment to be used in the process. Interested in learning and qualifying in more stringent welding requirements of pressure boundary for piping, tanks, or vessels. </li></ul>Qualification Highlights: <ul><li>Must have the ability to weld in 2g, 4g, and 6g conditions (at Welder II position and higher) </li><li>Must be able to Stick and TIG weld on pipe (at Welder II position and higher) </li><li>Must have current applicable welding certification with RCI or be able to pass a weld test successfully </li><li>Must have required welding experience for the welding classification </li><li>Must have all required Knowledge, Skills, and Abilities for position - see below </li><li>Must be able to meet all physical requirements </li><li>Must have all tools listed below upon start date </li><li>Must be able to regularly and reliably show up at the assigned job site </li><li>Must meet all safety and security requirements at the assigned job site </li></ul>Position Responsibilities: <ul><li>Selects equipment and plans layouts, assembly, and welding of pipe applying knowledge of geometry, physical properties of metals to be assembled, metals machining, weld shrinkage, and welding techniques </li><li>Layout, position, align, cut, assemble, and fit metal components together in various body positions and in various places </li><li>Bolts, clamps, and tack welds parts to secure in position for welding </li><li>Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or arc gas welding equipment </li><li>Weld metal materials to piping systems, supports, or associated equipment using the appropriate welding procedure for the various equipment and metal types involved </li><li>Identify all equipment for job and process </li><li>Identify all safety risks and requirements </li></ul>Preferred Additional Qualifications: <ul><li>Current RCI employee </li><li>RCI former employee from a Reduction of Force (ROF) </li><li>Current RCI Welding Certification </li><li>Former experience working with RCI </li><li>Experience working as an Industrial Pipe Fitter </li><li>Former experience working in the petrochemical industry </li></ul>Physical Requirements: <ul><li>Employee will be required to adhere to large amounts of standing, waling, bending, squatting, sitting, and lifting </li><li>Will talk and hear to communicate effectively </li><li>Will use arms and hands to signal, grab, hold, turn, push and pull various objects, materials, controls or tools </li><li>Will be required to lift, carry, and move up to 50 lbs in weight </li><li>Will work at slight heights, climb ladders and stairways, and may occasionally work off of platforms using the appropriate fall protection requirements </li><li>Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and safety toe work boots </li><li>Must be capable of working outdoors in the elements including but not limited to the heat, cold, rain, snow, and wind, while wearing appropriate PPE. Must be able to work for long period of times up to 12 hours a day. </li></ul>Required Tools: <ul><li>1 - Metal Tool Box with Lock & Bolt Bag </li><li>1 - Stinger </li><li>1 - TIG Rig (combo welders only) </li><li>1 - Welding Hood </li><li>1 - Chipping Hammer </li><li>1 - Pair of Klein Pliers or equal </li><li>2 - Crescent Wrench 12" and 15" </li><li>1 - 25' Tape </li><li>1 - 32 oz. Ball Peen Hammer </li><li>1 - Torpedo Level </li><li>1 - Combination Square </li><li>1 - Pair of Leathers (overhead welding) </li><li>1 - Safety Toed Boots </li></ul>RCI is dedicated in providing a SAFE and Drug Free environment. RCI is a Equal Opportunity Employer (EEO).

richard llp

Mechanical Welder/Combo Welder

2G (2nd Generation) Wireless

4G (4th Generation) Wireless

Amazon Web Services (AWS)

Arc Welding

Communication Skills

Construction

Equipment Selection

Gas Welding

Geometry

Lift/Move 50 Pounds

Machining

Metal Joining

Petrochemicals

Physical Demands

Pressure Vessels

Risk Analysis

Safety Training

Safety/Work Safety

Welding

Hire Recruits

Pipe Fitter jobs in Beaumont, TX on your radar? Find the best of them right here on Monster.

The Best Pipe Fitter Jobs in Beaumont, TX | Monster

Pipe Fitter Jobs in Beaumont, TX

Resume Resources

Get noticed by top employers!

Pipe Fitter Jobs in Beaumont, TX

Now Hiring Pipe Fitters Labor One Staffing

Instrument Fitter Journey Bechtel Corporation

Mechanical Welder/Combo Welder richard llp

Resume Resources