Systems Safety Engineer CyientSystems Safety EngineerSeattle, WAContractorVisa – Visa Independent candidates (Pref - Us Citizen and Green card). Work Shift - Mon-Tues-Wed-Thurs-Fri – Onsite.
Senior Nuclear Safety Analysis Engineer (Accident/Transient Methods) System OneSenior Nuclear Safety Analysis Engineer (Accident/Transient Methods)Bellevue, WARemote$69–$115 / hourOther engineering activities include, but are not limited to, performing accident analyses, contributing to software qualification, participating in hazard analysis, participating in Structures, Systems and Components (SSC) classification, as well as performing verification and validation activities. Familiarity with nuclear design, regulatory requirements, and risk-informed performance-based technology guidance for Non-Light Water Reactors under Regulatory Guide (RG) 1.233 is strongly preferred.
Senior Safety Verification and Validation Engineer System OneSenior Safety Verification and Validation EngineerBellevue, WARemote$72–$90 / hourYou will work on developing and assessing benchmark models, ensuring compliance with NRC guidance (RG 1.203), and supporting safety methodology development for next-generation nuclear systems, including Sodium Fast Reactors (SFR). Qualifications & Skills:Extensive experience with nuclear safety software verification, validation, and system transient analysis codes (RELAP5-3D, TRACE, MELCOR, SAS4A/SASSYS-1, SAM, or similar).
NewSafety Analysis Engineer, Nuclear System OneSafety Analysis Engineer, NuclearBellevue, WARemote$69–$115 / hourThis contract Safety Analysis Engineer role performs deterministic nuclear safety analysis and transient/accident modeling (RELAP5-3D or similar) to support U.S. NRC licensing submittals. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America.
Senior Safety Methods Engineer System OneSenior Safety Methods EngineerBellevue, WA$37–$74 / hourThe engineer also builds automated, repeatable workflows, documents methodologies and assumptions, collaborates across disciplines to align methods with design and safety analysis, and follows SQA/NQA-1 practices to ensure traceability, configuration control, and reproducibility. Responsibilities include running steady-state and transient analyses to assess model performance and fidelity needs, integrating closure models and empirical correlations into existing frameworks, and identifying gaps through sensitivity studies to drive method improvements.
LabVIEW Test Engineer VBeyond CorporationLabVIEW Test EngineerLynnwood, WAContractorFull timeMaintain and improve existing test frameworks and automation setups. Job Description: Develop and execute LabVIEW-based test systems for aerospace applications.
OSP Engineer Mountain Ltd.OSP EngineerTacoma, WA$30–$36 / hourThe Outside Plant Engineer is a subject matter expert of for all technical aspects of outside plant facilities and associated work such as cable sizing, cable counts, cable records and permitting for ROW’s and easements. This position works as a team member with Network Planning, Central Office, Transmission and Operations to support the growth, replacements, and upgrade of telecommunications plant facilities.
EWIS Engineer (w/Capital Harness Experience) 804 TechnologyEWIS Engineer (w/Capital Harness Experience)Seattle, WA$165,000–$184,000 / yearFull timeYou will play a key part in ensuring wiring harnesses and interconnection systems meet all functional, safety, and certification requirements while delivering high-quality engineering solutions to our customers. We are seeking a talented EWIS (Electrical Wiring Interconnection System) Engineers with 5+ years of drawing and design experience in Siemens Capital Harness (Capital).
NewCommercial Construction Project Engineer HITT ContractingCommercial Construction Project EngineerSeattle, WA$77,000–$82,000 / yeardiv>Master required job-specific and technical skills in order to promote to an assistant superintendent or assistant project manager following the 12-month training program including, but not limited to, the ability to: Set up and maintain jobsite office and all jobsite records, including project directory, construction documents, subcontractor directory, daily reports, submittal logs, RFI logs, subcontractor correspondence, etc. Ability to learn sector- and project-specific software systems, including but not limited to: Microsoft Office 365 (Project, Excel, Word, Outlook, PowerPoint, etc.), ProCore, Adobe Suite, BlueBeam, and JD Edwards software suite .NewCRD System Design Engineer (Mechanical) System OneCRD System Design Engineer (Mechanical)Bellevue, WARemote$54–$90 / hourp>The selected candidate will collaborate with project managers, design engineers, analysts, test engineers, supply chain teams, and other engineering disciplines to support the successful development and deployment of advanced reactor technology. The successful candidate will demonstrate strong technical leadership, engineering excellence, attention to detail, and the ability to thrive in a fast-paced, collaborative engineering environment.NewPlant Radiological Integration Engineer System OnePlant Radiological Integration EngineerBellevue, WARemote$69–$115 / hourpre>Job Title: Plant Radiological Integration Engineer Location: Bellevue, WA Type: Contract Compensation: $69.00 – $115.00 Work Model: Remote – offsite Hours: 40.0System One is hiring a Plant Radiological Integration Engineer to provide the following services that will focus on Nuclear Island System, Structure and Component (SSC) design integration with plant radiological design, analysis, and shielding requirements. The Plant Radiological Integration Engineer will work as part of a high-performing team of engineers and scientists.ResponsibilitiesCoordinate between design teams working on plant source term and radiological release analysis, risk analysis, plant operations and SSC radiological shielding design teams.NewComponent Engineer, Nuclear System OneComponent Engineer, NuclearBellevue, WARemote$52–$85 / hourSystem One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. This role may require sitting or standing for extended periods, with tasks including bending, grasping, and fine motor control.NewRAC Component Design Engineer (Ventilation) System OneRAC Component Design Engineer (Ventilation)Bellevue, WARemote$50–$80 / hourli>Provide technical direction and interface to supplier projects, working with supply chain teams to ensure delivery of engineering designs and other deliverables, as well as coordination and performance of technical reviews of deliverables. Interface with and support licensing activities needed to obtain both the construction and operating licenses for the reactor systems including development of safety analysis reports, technical specifications, topical reports, and other licensing documents.NewSoftware Development Engineer, DcsHostMonitoring Amazon Data Services, Inc.Software Development Engineer, DcsHostMonitoringSeattle, WAAmazon's global data center infrastructure and hosts generate millions of telemetric signals that are used to power alarms and help data center personnel monitor data centers. - 1+ years of designing and developing large-scale, multi-tiered, multi-threaded, embedded or distributed software applications, tools, systems, and services using: C#, C++, Java, or Perl experience.NewSoftware Development Engineer II, SKG Team Amazon Data Services, Inc.Software Development Engineer II, SKG TeamSeattle, WAAmazon's global data center infrastructure generates millions of operational alarms daily, and right now most of the triage, analysis, and routing of those alarms requires significant human effort from engineering operations teams. - Build the services in the Data Center Alarming Platform that turn an alarm firehose into actionable signal: suppression, correlation, and deduplication logic running across hundreds of data centers.Electrical Engineer Davis Wire CorporationElectrical EngineerKent, WAp>More information about the overall organization can be found at www.heicocompanies.com. Historically talented at restoring distressed companies, Heico strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.NewSenior Mechanical Engineer ASME Lead System OneSenior Mechanical Engineer ASME LeadBellevue, WARemote$69–$115 / hourThis role will focus on the design, analysis, and certification of safety-related reactor components and pressure-retaining systems in accordance with ASME Section III requirements. This is an excellent opportunity to contribute to next-generation nuclear technology while working with a highly collaborative engineering team focused on innovation, safety, and technical excellence.I & C Human Factors Engineer System OneI & C Human Factors EngineerBellevue, WARemote$56–$95 / hourThis role focuses on integrating Human Factors Engineering (HFE) into digital control systems and human-system interfaces (HSIs) for next-generation reactor technology. This role supports an advanced nuclear technology program focused on delivering safe, reliable, and innovative energy solutions.Thermal Analysis Engineer System OneThermal Analysis EngineerBellevue, WARemote$52–$85 / hourli>Perform thermal modeling of fluid-structure interfaces, including metallic structure thermal problems with structure conductive heat transfer, air convective heat transfer, radiation, and sodium-structure heat transfer modes. Work with our client’s component design leads and analysis engineers to evaluate specific component issues, develop local models or modify existing, and provide insights and feedback to design teams for action.Senior Mechanical Engineer - Remote System OneSenior Mechanical Engineer - RemoteSeattle, WARemote$55–$75 / hourThis position will play a key role in managing multi-discipline engineering efforts, supporting EPCm-style projects, and ensuring successful project execution across safety, quality, cost, and schedule. This role is ideal for a hands-on engineering professional who is experienced across the full project lifecycle—from concept and pre-FEED through commissioning and startup.NewProbabilistic Risk Assessment (PRA) Engineer (Entry Level) System OneProbabilistic Risk Assessment (PRA) Engineer (Entry Level)Bellevue, WARemote$37–$74 / hourp>The selected candidate will contribute to the development and maintenance of PRA models, perform risk analyses, support hazard evaluations, and collaborate with engineering teams to ensure safe, reliable, and innovative reactor designs. This role offers an excellent opportunity to work with a multidisciplinary engineering team performing probabilistic risk assessments, severe accident analysis, and safety evaluations that support reactor design, licensing, and regulatory compliance.System Design Engineer System OneSystem Design EngineerBellevue, WARemote$50–$80 / hourp>The ideal candidate will act as a system-level engineer, working across multiple disciplines to develop, integrate, and refine system designs from concept through commissioning. Develop and review technical documents such as System Design Descriptions (SDDs), Interface Control Documents (ICDs), and Engineering Design Specifications .NewRAC System Engineer (Process & I&C) System OneRAC System Engineer (Process & I&C)Bellevue, WARemote$54–$90 / hourli>Develop engineering designs supporting lifecycle factors including operability, maintainability, and reliability. Previous experience with commercial nuclear reactors and systems, high temperature pressure vessels, or similar systems (highly desired).System Transients Analysis Engineer System OneSystem Transients Analysis EngineerBellevue, WARemote$67–$110 / hourThis role will focus on thermal hydraulic and transient analysis activities supporting advanced reactor system design, plant operations analysis, and control system integration. System One is seeking a highly capable and motivated System Transients Analysis Engineer to support an advanced sodium-cooled reactor program.Plant Integrated Analysis Engineer System OnePlant Integrated Analysis EngineerBellevue, WARemote$37–$74 / hourp>Working as part of a multidisciplinary engineering team, you'll collaborate with safety, instrumentation & controls (I&C), and system design engineers to model, analyze, and validate complex plant systems. System One is seeking a highly motivated Plant Integrated Analysis Engineer to support the development of advanced sodium-cooled nuclear reactor technology.NewRAC System Design Engineer (Mechanical) System OneRAC System Design Engineer (Mechanical)Bellevue, WARemote$54–$90 / hourp>The selected candidate will collaborate with project managers, design engineers, analysts, test engineers, and multidisciplinary engineering teams to support the successful design, integration, and deployment of this first-of-a-kind reactor technology. This role will support the ongoing development of a passive reactor cooling system designed to continuously remove heat through natural convection, providing safe and reliable cooling without reliance on pumps or operator actions.Test Engineer III (Metrology) BC ForwardTest Engineer III (Metrology)Redmond, WA$53–$55 / hourFull timeMaster's degree or equivalent experience in Optics, Optical Sciences, Optical Engineering, Physics, Mechanical Engineering, Electrical Engineering, Computer Sciences, or a similar field. The ideal candidate will have strong experience in optical testing, calibration, data analysis, and test automation and a proven ability to develop and execute test procedures, analyze results, and drive hardware quality.Senior Dam Safety Engineer - FERC IC McMillen Jacobs AssociatesSenior Dam Safety Engineer - FERC ICKirkland, WARemoteFull timeFrom concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. We are looking for a licensed Professional Engineer (PE) with a strong background in civil, structural, hydrological, or geotechnical engineering as it relates to FERC dam safety evaluations.Traffic Project Engineer - Operations, Safety & Policy RK&KTraffic Project Engineer - Operations, Safety & PolicySeattle, WAFull timeIf you need more information on special assistance regarding limited English proficiency, contact your RK&K office receptionist and they will be able to direct you to: 1) an individual with our company that speaks your language; 2) an outside service that can assist you in communicating with RK&K; or 3) you may also contact Human Resources at: 410-728-2900. Assist with Speed Safety Camera programs for work zones including program management, implementation, assessment of program effectiveness, quality assurance and vendor coordination.Regional Safety, Health & Environmental Manager II (Remote) Sunbelt Rentals, Inc.Regional Safety, Health & Environmental Manager II (Remote)Seattle, WARemoteFull timeEducation or experience that prepares you for success:Bachelor's degree in Occupational Safety and Health or a related field or equivalent work experience5 years working with Safety, Health and Environmental Management Systems and implementation of safety programsPreferred Safety Certification - CSP, ASP and CIHAbility and willingness to travel overnightKnowledge/Skills/Abilities you may rely on:Exceptional written and verbal skills when addressing either individuals or groupsPresenting information in classroom or conference call settingsDeveloping and executing a strategic plan with measurable goals based on leading and lagging indicator performance. OSHA construction and general industry regulation knowledgeDOT regulations and transportation safetyMS Office Suite - Excel, Word, Outlook and PowerPointSafety is key to our culture:The physical demands of this role require bending, squatting, crouching, reaching, lifting 25 pounds or more, and working indoors/outdoors when required by the job.Safety & Airworthiness Specialist 3 Spectraforce Technologies Inc.Safety & Airworthiness Specialist 3Everett, WAFull timeFor any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process. * We work with the functional groups within client to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.Safety & Airworthiness Specialist 4 Spectraforce Technologies Inc.Safety & Airworthiness Specialist 4Everett, WAFull timeFor any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process. * We work with the functional groups within client to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.Safety & Airworthiness Specialist DISYS, LLCSafety & Airworthiness SpecialistEverett, WAFull timeA successful Senior candidate will have the following qualifications: * Strong written and verbal communication skills * Strong ability to interact and communicate with Boeing senior management and technical peers from external Customers, including airlines and regulatory agencies * Ability to lead, influence, and mentor a diverse team * Intrinsic aptitude for taking initiative, leading cross functional teams and complex projects * Ability and willingness to take ownership of, and facilitate, work activities to ensure they are completed accurately, efficiently, and in a timely manner. Preferred Qualifications (Desired Skills/Experience): * Working knowledge with Root Cause Corrective Action (RCCA) tools such as 5-Whys or Fishbone, and/or the Problem Solving Model * 1+ years of experience with commercial airplane operation, certification, safety requirements and procedures * Working knowledge of FAA Regulatory Compliance and ODA procedures per 8100.15Project Safety Manager (SSHO) - Federal Construction Contrack WattsProject Safety Manager (SSHO) - Federal ConstructionBremerton, WAFull timeThe Project Safety Manager reports to the Project Superintendent or Project Manager and may manage other Project Safety Managers assigned to the project(s).The All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws).Food Safety and Quality Advisor Spectraforce Technologies Inc.Food Safety and Quality AdvisorSeattle, WAFull timeApply in-depth technical knowledge to projects and gather insights (i.e., testing, supplier and product assessment) across a wide variety of single-use packaging materials/items including but not limited to: poly-coated paperboard (hot cups), polypropylene PP (cups and lids), polylactic acid PLA, poly-hydroxyalkanoic acids PHA, molded pulp, corrugate, containerboard, utensils, etc. Identify trends and lead investigation and resolution of packaging related concerns from regulators, retail stores, field QA partners or internal and external customers.Site Safety and Health Officer (SSHO) - 3020 Doyon Government GroupSite Safety and Health Officer (SSHO) - 3020Seattle, WAFull timeThe construction Site Safety & Health Officer (SSHO) is responsible for developing and reviewing the Accident Prevention Plan, conducting activity hazard analyses, updating the plan as needed, providing on-site safety education, organizing toolbox safety meetings, ensuring overall safety compliance, and adopting a proactive, innovative approach to resolving site-specific safety challenges. Average of at least 24 hours of formal safety training each year for the past 4 years - Includes training for Competent Person status in at least the following areas: Excavation, Scaffolding, Fall Protection, Hazardous Energy, Confined Space, and Health Hazard Recognition, Evaluation, and Control of Chemical, Physical, and Biological Agents.Safety Specialist Montrose Environmental Group Inc.Safety SpecialistAuburn, WAFull timeOur scientists, engineers, field teams, consultants and professionals collaborate across disciplines and geographies, guiding industries and governments, ensuring that communities and environments thrive. * Provide HSE support to customer locations that include major refineries, chemical plants, power plants, and other testing facilities.Safety Manager AA Asphalting, LLCSafety ManagerSumner, WA$120,000–$140,000 / yearFull timeThis position is responsible for developing, managing, and implementing programs that reduce or eliminate vehicle accidents, occupational hazards, workplace injuries, and financial losses, while promoting a strong safety culture focused on preventing workplace incidents and minimizing overall risk. Investigates all near-miss, vehicle, equipment & property accidents, utility line damage, and workplace injuries including incident and accident investigation, reporting, establishing root cause and corrective action, and any follow up on safety performance issues.Process Engineer (Gypsum) Georgia-PacificProcess Engineer (Gypsum)Tacoma, WAFull timeCONTACTS / INTERFACES: Internal: Interacts with key operations personnel such as the Plant Manager, Division Process Engineering Manager, Superintendents (Operations and Maintenance), Safety Manager, Environmental Manager, Quality Manager, Regional Operations Managers, and Divisional Support Staff. GENERAL TASKS: Root Cause analysis; equipment troubleshooting; gap analysis; benchmarking; developing improvement plans; leading improvement teams; asset performance tracking & reporting; developing and implementing best practices; providing technical leadership and support on both capital and non-capital projects.Software Engineer, Ads Manager OpenAI Inc.Software Engineer, Ads ManagerSeattle, WA$230,000–$385,000 / yearFull timeFor unincorporated Los Angeles County workers: we reasonably believe that criminal history may have a direct, adverse and negative relationship with the following job duties, potentially resulting in the withdrawal of a conditional offer of employment: protect computer hardware entrusted to you from theft, loss or damage; return all computer hardware in your possession (including the data contained therein) upon termination of employment or end of assignment; and maintain the confidentiality of proprietary, confidential, and non-public information. You'll work across the full technical stack to build intuitive self-serve workflows for small and mid-sized advertisers, as well as scalable APIs and integrations for large enterprise advertisers, agencies, and ad-tech partners who manage campaigns through their own buying platforms or intermediary systems.Senior Electrical Engineer | Seattle, WA IMEG Corp.Senior Electrical Engineer | Seattle, WAQueen Anne, WAFull timeIMEG's electrical engineers design power distribution, lighting, and specialty electrical systems for buildings and infrastructure* Electrical projects support a wide range of facility types, including data centers, hospitals, and K-12 environments* The team works closely with other design disciplines to deliver integrated, code-compliant, high-performance, energy-efficient outcomes for clients. IMEG is hiring a Senior Electrical Engineer in Seattle, Washington, to lead design efforts as a project manager or lead engineer for moderate to complex building projects.Project Engineer (Systems - TPSS) Colliers Engineering & DesignProject Engineer (Systems - TPSS)Seattle, WA$130,000–$165,000 / yearFull timeRamos CS, now a part of Colliers Engineering & Design, is actively hiring a Project Engineer (Systems - TPSS) to perform a wide variety of professional engineering work in a field setting on a transit capital program's Transit Power Substation System (TPSS) portfolio. The Project Engineer is directly responsible for field oversight of TPSS construction, installation, and commissioning activities, and reviews the work of Authority, State, and Contractors in accordance with the applicable Design Criteria Manual, Construction Manual, and all governing specifications.Senior Mechanical Engineer - Buildings Colliers Engineering & DesignSenior Mechanical Engineer - BuildingsSeattle, WA$106,600–$140,000 / yearFull timeWe have also created an internal culture that provides the resources and technology needed to encourage personal and professional growth opportunities through reimbursement for education; a free in-house resource for hundreds of educational and self-enrichment courses; mentorship program; wellness program; Women's Organization and ongoing philanthropic opportunities. We provide a full range of mechanical engineering services to municipal, commercial, higher education and public works agencies, partnering with clients to design buildings from the ground-up or to renovate existing buildings to optimize their use.Senior Engineer - Grid Modernization Puget Sound Energy, IncSenior Engineer - Grid ModernizationClyde Hill, WAFull timeOur team is currently discovering new solutions that leverage automation, storage, distributed energy resources, smart meters, analysis tools and other modern grid technology to meet our evolving operational and customer needs. The ideal candidate will work with cross-functional teams in IT, Operations, Planning, Engineering and Customer Care to gather requirements and identify business needs to inform strategic planning for smart grid technologies.Fire Protection Engineer (5+ Years) Coffman EngineersFire Protection Engineer (5+ Years)Seattle, WAFull timeTechnical skills will include, but not limited to: automatic suppression system design; fire detection, alarm and communication system design; code analysis; egress analysis; fire resistant construction analysis; smoke control analysis; as well as general fire protection and life safety concepts and research. Our broad range of markets, clients, and services, coupled with industry-leading talent, provides unique and exciting opportunities to grow as professionals, serve clients, and make a difference in our communities.Manufacturing Engineer 3 Spectraforce Technologies Inc.Manufacturing Engineer 3Woodmont Beach, WAFull timeManufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.Engineer - Quality and Continuous Improvement Senior (Internal Auditor) Blue Origin LLCEngineer - Quality and Continuous Improvement Senior (Internal Auditor)Seattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.Sr Engineer, Critical Facilities Spectraforce Technologies Inc.Sr Engineer, Critical FacilitiesBellevue, WAFull time3-7 years in direct experience operating, designing, constructing, maintaining and managing large scale production data centers/critical facilities at the enterprise level with understanding and leadership in engineering in the disciplines needed to sustain continuous availability. Strong skills in vendor relationship management and communication, critical engineering practices, organizational savvy, people management and team leadership, and the ability to identify and manage variation in metrics.Project Engineer - Federal Flatiron Construction CorpProject Engineer - FederalSeattle, WA$130,000–$150,000 / yearFull timeRemit accurate project quantities using assigned project cost coding to ensure project financials are accurately reported. Notifies engineering and project management of any significant schedule changes and develops solutions to mitigate delays and cost.12345678910Resume ResourcesFree Resume TemplatesFree Resume BuilderSimilar Job SearchesSafety Manager JobsSafety Officer JobsSafety Specialist Jobs
NewCRD System Design Engineer (Mechanical) System OneCRD System Design Engineer (Mechanical)Bellevue, WARemote$54–$90 / hourp>The selected candidate will collaborate with project managers, design engineers, analysts, test engineers, supply chain teams, and other engineering disciplines to support the successful development and deployment of advanced reactor technology. The successful candidate will demonstrate strong technical leadership, engineering excellence, attention to detail, and the ability to thrive in a fast-paced, collaborative engineering environment.
NewPlant Radiological Integration Engineer System OnePlant Radiological Integration EngineerBellevue, WARemote$69–$115 / hourpre>Job Title: Plant Radiological Integration Engineer Location: Bellevue, WA Type: Contract Compensation: $69.00 – $115.00 Work Model: Remote – offsite Hours: 40.0System One is hiring a Plant Radiological Integration Engineer to provide the following services that will focus on Nuclear Island System, Structure and Component (SSC) design integration with plant radiological design, analysis, and shielding requirements. The Plant Radiological Integration Engineer will work as part of a high-performing team of engineers and scientists.ResponsibilitiesCoordinate between design teams working on plant source term and radiological release analysis, risk analysis, plant operations and SSC radiological shielding design teams.
NewComponent Engineer, Nuclear System OneComponent Engineer, NuclearBellevue, WARemote$52–$85 / hourSystem One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. This role may require sitting or standing for extended periods, with tasks including bending, grasping, and fine motor control.
NewRAC Component Design Engineer (Ventilation) System OneRAC Component Design Engineer (Ventilation)Bellevue, WARemote$50–$80 / hourli>Provide technical direction and interface to supplier projects, working with supply chain teams to ensure delivery of engineering designs and other deliverables, as well as coordination and performance of technical reviews of deliverables. Interface with and support licensing activities needed to obtain both the construction and operating licenses for the reactor systems including development of safety analysis reports, technical specifications, topical reports, and other licensing documents.
NewSoftware Development Engineer, DcsHostMonitoring Amazon Data Services, Inc.Software Development Engineer, DcsHostMonitoringSeattle, WAAmazon's global data center infrastructure and hosts generate millions of telemetric signals that are used to power alarms and help data center personnel monitor data centers. - 1+ years of designing and developing large-scale, multi-tiered, multi-threaded, embedded or distributed software applications, tools, systems, and services using: C#, C++, Java, or Perl experience.
NewSoftware Development Engineer II, SKG Team Amazon Data Services, Inc.Software Development Engineer II, SKG TeamSeattle, WAAmazon's global data center infrastructure generates millions of operational alarms daily, and right now most of the triage, analysis, and routing of those alarms requires significant human effort from engineering operations teams. - Build the services in the Data Center Alarming Platform that turn an alarm firehose into actionable signal: suppression, correlation, and deduplication logic running across hundreds of data centers.
Electrical Engineer Davis Wire CorporationElectrical EngineerKent, WAp>More information about the overall organization can be found at www.heicocompanies.com. Historically talented at restoring distressed companies, Heico strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.
NewSenior Mechanical Engineer ASME Lead System OneSenior Mechanical Engineer ASME LeadBellevue, WARemote$69–$115 / hourThis role will focus on the design, analysis, and certification of safety-related reactor components and pressure-retaining systems in accordance with ASME Section III requirements. This is an excellent opportunity to contribute to next-generation nuclear technology while working with a highly collaborative engineering team focused on innovation, safety, and technical excellence.
I & C Human Factors Engineer System OneI & C Human Factors EngineerBellevue, WARemote$56–$95 / hourThis role focuses on integrating Human Factors Engineering (HFE) into digital control systems and human-system interfaces (HSIs) for next-generation reactor technology. This role supports an advanced nuclear technology program focused on delivering safe, reliable, and innovative energy solutions.
Thermal Analysis Engineer System OneThermal Analysis EngineerBellevue, WARemote$52–$85 / hourli>Perform thermal modeling of fluid-structure interfaces, including metallic structure thermal problems with structure conductive heat transfer, air convective heat transfer, radiation, and sodium-structure heat transfer modes. Work with our client’s component design leads and analysis engineers to evaluate specific component issues, develop local models or modify existing, and provide insights and feedback to design teams for action.
Senior Mechanical Engineer - Remote System OneSenior Mechanical Engineer - RemoteSeattle, WARemote$55–$75 / hourThis position will play a key role in managing multi-discipline engineering efforts, supporting EPCm-style projects, and ensuring successful project execution across safety, quality, cost, and schedule. This role is ideal for a hands-on engineering professional who is experienced across the full project lifecycle—from concept and pre-FEED through commissioning and startup.
NewProbabilistic Risk Assessment (PRA) Engineer (Entry Level) System OneProbabilistic Risk Assessment (PRA) Engineer (Entry Level)Bellevue, WARemote$37–$74 / hourp>The selected candidate will contribute to the development and maintenance of PRA models, perform risk analyses, support hazard evaluations, and collaborate with engineering teams to ensure safe, reliable, and innovative reactor designs. This role offers an excellent opportunity to work with a multidisciplinary engineering team performing probabilistic risk assessments, severe accident analysis, and safety evaluations that support reactor design, licensing, and regulatory compliance.
System Design Engineer System OneSystem Design EngineerBellevue, WARemote$50–$80 / hourp>The ideal candidate will act as a system-level engineer, working across multiple disciplines to develop, integrate, and refine system designs from concept through commissioning. Develop and review technical documents such as System Design Descriptions (SDDs), Interface Control Documents (ICDs), and Engineering Design Specifications .
NewRAC System Engineer (Process & I&C) System OneRAC System Engineer (Process & I&C)Bellevue, WARemote$54–$90 / hourli>Develop engineering designs supporting lifecycle factors including operability, maintainability, and reliability. Previous experience with commercial nuclear reactors and systems, high temperature pressure vessels, or similar systems (highly desired).
System Transients Analysis Engineer System OneSystem Transients Analysis EngineerBellevue, WARemote$67–$110 / hourThis role will focus on thermal hydraulic and transient analysis activities supporting advanced reactor system design, plant operations analysis, and control system integration. System One is seeking a highly capable and motivated System Transients Analysis Engineer to support an advanced sodium-cooled reactor program.
Plant Integrated Analysis Engineer System OnePlant Integrated Analysis EngineerBellevue, WARemote$37–$74 / hourp>Working as part of a multidisciplinary engineering team, you'll collaborate with safety, instrumentation & controls (I&C), and system design engineers to model, analyze, and validate complex plant systems. System One is seeking a highly motivated Plant Integrated Analysis Engineer to support the development of advanced sodium-cooled nuclear reactor technology.
NewRAC System Design Engineer (Mechanical) System OneRAC System Design Engineer (Mechanical)Bellevue, WARemote$54–$90 / hourp>The selected candidate will collaborate with project managers, design engineers, analysts, test engineers, and multidisciplinary engineering teams to support the successful design, integration, and deployment of this first-of-a-kind reactor technology. This role will support the ongoing development of a passive reactor cooling system designed to continuously remove heat through natural convection, providing safe and reliable cooling without reliance on pumps or operator actions.
Test Engineer III (Metrology) BC ForwardTest Engineer III (Metrology)Redmond, WA$53–$55 / hourFull timeMaster's degree or equivalent experience in Optics, Optical Sciences, Optical Engineering, Physics, Mechanical Engineering, Electrical Engineering, Computer Sciences, or a similar field. The ideal candidate will have strong experience in optical testing, calibration, data analysis, and test automation and a proven ability to develop and execute test procedures, analyze results, and drive hardware quality.
Senior Dam Safety Engineer - FERC IC McMillen Jacobs AssociatesSenior Dam Safety Engineer - FERC ICKirkland, WARemoteFull timeFrom concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. We are looking for a licensed Professional Engineer (PE) with a strong background in civil, structural, hydrological, or geotechnical engineering as it relates to FERC dam safety evaluations.
Traffic Project Engineer - Operations, Safety & Policy RK&KTraffic Project Engineer - Operations, Safety & PolicySeattle, WAFull timeIf you need more information on special assistance regarding limited English proficiency, contact your RK&K office receptionist and they will be able to direct you to: 1) an individual with our company that speaks your language; 2) an outside service that can assist you in communicating with RK&K; or 3) you may also contact Human Resources at: 410-728-2900. Assist with Speed Safety Camera programs for work zones including program management, implementation, assessment of program effectiveness, quality assurance and vendor coordination.
Regional Safety, Health & Environmental Manager II (Remote) Sunbelt Rentals, Inc.Regional Safety, Health & Environmental Manager II (Remote)Seattle, WARemoteFull timeEducation or experience that prepares you for success:Bachelor's degree in Occupational Safety and Health or a related field or equivalent work experience5 years working with Safety, Health and Environmental Management Systems and implementation of safety programsPreferred Safety Certification - CSP, ASP and CIHAbility and willingness to travel overnightKnowledge/Skills/Abilities you may rely on:Exceptional written and verbal skills when addressing either individuals or groupsPresenting information in classroom or conference call settingsDeveloping and executing a strategic plan with measurable goals based on leading and lagging indicator performance. OSHA construction and general industry regulation knowledgeDOT regulations and transportation safetyMS Office Suite - Excel, Word, Outlook and PowerPointSafety is key to our culture:The physical demands of this role require bending, squatting, crouching, reaching, lifting 25 pounds or more, and working indoors/outdoors when required by the job.
Safety & Airworthiness Specialist 3 Spectraforce Technologies Inc.Safety & Airworthiness Specialist 3Everett, WAFull timeFor any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process. * We work with the functional groups within client to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
Safety & Airworthiness Specialist 4 Spectraforce Technologies Inc.Safety & Airworthiness Specialist 4Everett, WAFull timeFor any identified issue related to FAA issued Letters of Investigation, Informal or Formal Compliance Actions, Voluntary Disclosures, Self-Audit findings, and Part 25 Airworthiness Non-Compliances, the BCA S&CI team leads the functional engineering organizations (Systems, Structures, Payloads, Propulsion) through the structured investigation process. * We work with the functional groups within client to investigate the regulatory compliance issue by identifying the problem statement, developing a comprehensive root cause investigation that leads to systemic root causes, developing containment actions, actions to prevent recurrence, and actions to verify non-recurrence.
Safety & Airworthiness Specialist DISYS, LLCSafety & Airworthiness SpecialistEverett, WAFull timeA successful Senior candidate will have the following qualifications: * Strong written and verbal communication skills * Strong ability to interact and communicate with Boeing senior management and technical peers from external Customers, including airlines and regulatory agencies * Ability to lead, influence, and mentor a diverse team * Intrinsic aptitude for taking initiative, leading cross functional teams and complex projects * Ability and willingness to take ownership of, and facilitate, work activities to ensure they are completed accurately, efficiently, and in a timely manner. Preferred Qualifications (Desired Skills/Experience): * Working knowledge with Root Cause Corrective Action (RCCA) tools such as 5-Whys or Fishbone, and/or the Problem Solving Model * 1+ years of experience with commercial airplane operation, certification, safety requirements and procedures * Working knowledge of FAA Regulatory Compliance and ODA procedures per 8100.15
Project Safety Manager (SSHO) - Federal Construction Contrack WattsProject Safety Manager (SSHO) - Federal ConstructionBremerton, WAFull timeThe Project Safety Manager reports to the Project Superintendent or Project Manager and may manage other Project Safety Managers assigned to the project(s).The All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws).
Food Safety and Quality Advisor Spectraforce Technologies Inc.Food Safety and Quality AdvisorSeattle, WAFull timeApply in-depth technical knowledge to projects and gather insights (i.e., testing, supplier and product assessment) across a wide variety of single-use packaging materials/items including but not limited to: poly-coated paperboard (hot cups), polypropylene PP (cups and lids), polylactic acid PLA, poly-hydroxyalkanoic acids PHA, molded pulp, corrugate, containerboard, utensils, etc. Identify trends and lead investigation and resolution of packaging related concerns from regulators, retail stores, field QA partners or internal and external customers.
Site Safety and Health Officer (SSHO) - 3020 Doyon Government GroupSite Safety and Health Officer (SSHO) - 3020Seattle, WAFull timeThe construction Site Safety & Health Officer (SSHO) is responsible for developing and reviewing the Accident Prevention Plan, conducting activity hazard analyses, updating the plan as needed, providing on-site safety education, organizing toolbox safety meetings, ensuring overall safety compliance, and adopting a proactive, innovative approach to resolving site-specific safety challenges. Average of at least 24 hours of formal safety training each year for the past 4 years - Includes training for Competent Person status in at least the following areas: Excavation, Scaffolding, Fall Protection, Hazardous Energy, Confined Space, and Health Hazard Recognition, Evaluation, and Control of Chemical, Physical, and Biological Agents.
Safety Specialist Montrose Environmental Group Inc.Safety SpecialistAuburn, WAFull timeOur scientists, engineers, field teams, consultants and professionals collaborate across disciplines and geographies, guiding industries and governments, ensuring that communities and environments thrive. * Provide HSE support to customer locations that include major refineries, chemical plants, power plants, and other testing facilities.
Safety Manager AA Asphalting, LLCSafety ManagerSumner, WA$120,000–$140,000 / yearFull timeThis position is responsible for developing, managing, and implementing programs that reduce or eliminate vehicle accidents, occupational hazards, workplace injuries, and financial losses, while promoting a strong safety culture focused on preventing workplace incidents and minimizing overall risk. Investigates all near-miss, vehicle, equipment & property accidents, utility line damage, and workplace injuries including incident and accident investigation, reporting, establishing root cause and corrective action, and any follow up on safety performance issues.
Process Engineer (Gypsum) Georgia-PacificProcess Engineer (Gypsum)Tacoma, WAFull timeCONTACTS / INTERFACES: Internal: Interacts with key operations personnel such as the Plant Manager, Division Process Engineering Manager, Superintendents (Operations and Maintenance), Safety Manager, Environmental Manager, Quality Manager, Regional Operations Managers, and Divisional Support Staff. GENERAL TASKS: Root Cause analysis; equipment troubleshooting; gap analysis; benchmarking; developing improvement plans; leading improvement teams; asset performance tracking & reporting; developing and implementing best practices; providing technical leadership and support on both capital and non-capital projects.
Software Engineer, Ads Manager OpenAI Inc.Software Engineer, Ads ManagerSeattle, WA$230,000–$385,000 / yearFull timeFor unincorporated Los Angeles County workers: we reasonably believe that criminal history may have a direct, adverse and negative relationship with the following job duties, potentially resulting in the withdrawal of a conditional offer of employment: protect computer hardware entrusted to you from theft, loss or damage; return all computer hardware in your possession (including the data contained therein) upon termination of employment or end of assignment; and maintain the confidentiality of proprietary, confidential, and non-public information. You'll work across the full technical stack to build intuitive self-serve workflows for small and mid-sized advertisers, as well as scalable APIs and integrations for large enterprise advertisers, agencies, and ad-tech partners who manage campaigns through their own buying platforms or intermediary systems.
Senior Electrical Engineer | Seattle, WA IMEG Corp.Senior Electrical Engineer | Seattle, WAQueen Anne, WAFull timeIMEG's electrical engineers design power distribution, lighting, and specialty electrical systems for buildings and infrastructure* Electrical projects support a wide range of facility types, including data centers, hospitals, and K-12 environments* The team works closely with other design disciplines to deliver integrated, code-compliant, high-performance, energy-efficient outcomes for clients. IMEG is hiring a Senior Electrical Engineer in Seattle, Washington, to lead design efforts as a project manager or lead engineer for moderate to complex building projects.
Project Engineer (Systems - TPSS) Colliers Engineering & DesignProject Engineer (Systems - TPSS)Seattle, WA$130,000–$165,000 / yearFull timeRamos CS, now a part of Colliers Engineering & Design, is actively hiring a Project Engineer (Systems - TPSS) to perform a wide variety of professional engineering work in a field setting on a transit capital program's Transit Power Substation System (TPSS) portfolio. The Project Engineer is directly responsible for field oversight of TPSS construction, installation, and commissioning activities, and reviews the work of Authority, State, and Contractors in accordance with the applicable Design Criteria Manual, Construction Manual, and all governing specifications.
Senior Mechanical Engineer - Buildings Colliers Engineering & DesignSenior Mechanical Engineer - BuildingsSeattle, WA$106,600–$140,000 / yearFull timeWe have also created an internal culture that provides the resources and technology needed to encourage personal and professional growth opportunities through reimbursement for education; a free in-house resource for hundreds of educational and self-enrichment courses; mentorship program; wellness program; Women's Organization and ongoing philanthropic opportunities. We provide a full range of mechanical engineering services to municipal, commercial, higher education and public works agencies, partnering with clients to design buildings from the ground-up or to renovate existing buildings to optimize their use.
Senior Engineer - Grid Modernization Puget Sound Energy, IncSenior Engineer - Grid ModernizationClyde Hill, WAFull timeOur team is currently discovering new solutions that leverage automation, storage, distributed energy resources, smart meters, analysis tools and other modern grid technology to meet our evolving operational and customer needs. The ideal candidate will work with cross-functional teams in IT, Operations, Planning, Engineering and Customer Care to gather requirements and identify business needs to inform strategic planning for smart grid technologies.
Fire Protection Engineer (5+ Years) Coffman EngineersFire Protection Engineer (5+ Years)Seattle, WAFull timeTechnical skills will include, but not limited to: automatic suppression system design; fire detection, alarm and communication system design; code analysis; egress analysis; fire resistant construction analysis; smoke control analysis; as well as general fire protection and life safety concepts and research. Our broad range of markets, clients, and services, coupled with industry-leading talent, provides unique and exciting opportunities to grow as professionals, serve clients, and make a difference in our communities.
Manufacturing Engineer 3 Spectraforce Technologies Inc.Manufacturing Engineer 3Woodmont Beach, WAFull timeManufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.
Engineer - Quality and Continuous Improvement Senior (Internal Auditor) Blue Origin LLCEngineer - Quality and Continuous Improvement Senior (Internal Auditor)Seattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Sr Engineer, Critical Facilities Spectraforce Technologies Inc.Sr Engineer, Critical FacilitiesBellevue, WAFull time3-7 years in direct experience operating, designing, constructing, maintaining and managing large scale production data centers/critical facilities at the enterprise level with understanding and leadership in engineering in the disciplines needed to sustain continuous availability. Strong skills in vendor relationship management and communication, critical engineering practices, organizational savvy, people management and team leadership, and the ability to identify and manage variation in metrics.
Project Engineer - Federal Flatiron Construction CorpProject Engineer - FederalSeattle, WA$130,000–$150,000 / yearFull timeRemit accurate project quantities using assigned project cost coding to ensure project financials are accurately reported. Notifies engineering and project management of any significant schedule changes and develops solutions to mitigate delays and cost.