UNKNOWN

FEED

Other responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Attends pre-spud meetings and takes note of all well related hazards and ensures they are managed appropriately.

Overview:
Lewis Energy Group is a vertically integrated E&P Company.  We are one of the top national gas producers in South Texas and in the nation.  We operate in South Texas and have international operations.  We are proud of the family-oriented work culture we have built over the decades.  This culture carries into the pride we take in our work and in the communities, we operate in.   As a Toolpusher you will manage and direct rig operations during assigned shift to ensure maximum drilling efficiency and performance.

Responsibilities:
What role will you play on our team: Ensures the safe and efficient operation of the drilling rig and full compliance with all mandatory company, client, state, and federal rules and regulations. Guarantees well control requirements are in place according to operational requirements; assists in supervising well killing operations in an emergency situation. Attends pre-spud meetings and takes note of all well related hazards and ensures they are managed appropriately. Initiates changes to the pre-agreed program when and as required, to protect personnel, environment, equipment and the well. Leads the well control team at the drilling rig in conjunction with the senior personnel, including the acting Drilling Superintendent. Confirms completion of all preventative maintenance activities and projects in a safe, timely, and efficient manner. Supervises equipment preparation for impending drilling operations. Ensures the Driller and Drilling Superintendent of each tour are provided Standing Instructions relevant to planned operations. Maintains and ensures adequate rig supplies and spares. Directs rig down/rig up activity.                                                    Manages two subordinate who supervise a total of 10 employees in the Drilling Rigs department. Responsible for the overall direction, coordination, and evaluation of these units. Directly supervises 10 non-supervisory employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Other responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

Qualifications:
About you Minimum Qualifications High school diploma or general education degree (GED) and a minimum of seven years experience as a ToolpusherAbility to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.  Ability to write routine reports and correspondence.  Ability to speak effectively before groups of customers or employees of organization.                                                     Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.  Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.                                                          Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.  To perform this job successfully, an individual should have knowledge of Microsoft Office.Blowout  Prevention (BOP) certificate, Driller’s level Your work schedule:<ul style="margin-top:0in"><li style="color:#494949;margin-bottom:0in">Must be able to work up to 12.5 hours</li><li style="color:#494949;margin-bottom:0in">Must be able to work overtime when needed</li><li style="color:#494949;margin-bottom:0in">Rotation Schedule 7 days on and 7 days off (night & day shifts)</li><li style="color:#494949;margin-bottom:0in">Hours and schedule may vary based on operational tempo</li></ul>Your Benefits Lewis Energy Group appreciates the hard work and dedication you bring to our team every day. To do our part, we are committed to keeping your benefits affordable and beneficial for you and your eligible family members. Lewis Energy Group strives to provide benefits that meet your needs, are easy to understand and use, and provide excellent value for affordable costs.<ul><li>Insurance: Medical/Dental/Vision/ Basic Life and AD&D/and other benefit options to meet your personal needs</li><li>Retirement: 401K with immediate matching contribution</li><li>Annual Discretionary Bonus</li><li>Generous Paid Time Off and Paid Holidays</li><li>Employee Assistance Program (EAP) – Free, confidential support for you and your dependents</li><li>Wellness & Company Events throughout the year</li></ul>Equal Opportunity EmployerLewis Energy Group is an Equal Opportunity Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, citizenship status, protected veteran status, genetic information, or physical or mental disability.

Lewis Energy Group

Toolpusher

[AW]-iCims

ADAPTED_NOW

During normal drilling operations duties include washing, cleaning, mechanical repairs, digging ditches, drill pipe connections, drill pipe trips and other manual handling and/or maintenance activities as required by operational needs. There are two floor hand positions: Each must daily inspect the tongs, breakout line, snub lines, and tong dies for damage, excessive wear, fraying oil soaks, etc. and keep them safe and in good repair.

Position Generally, employees will start as a Floor Hand and work their way up through the positions on a rig.  Right now, Cyclone is hiring for the Floor Hand positions as they come open. The majority of applicants who are hired have 6 months or more experience working on a large Oil and Gas drilling Rig.  Qualifications     ​Required<ul><li>High School Diploma or GED</li><li>6 months experience on a large oil and gas drilling rig</li><li>Effective written and verbal communications</li><li>US Citizen or Green Card holder</li></ul>    ​Preferred<ul><li>1 years experience on a large oil and gas drilling rig</li><li>Safeland USA Training</li><li>History of employment showing long commitment to each employer</li></ul> Responsibilities: The Floorhand works under the direct supervision of the Driller. There are two floor hand positions:   Each must daily inspect the tongs, breakout line, snub lines, and tong dies for damage, excessive wear, fraying oil soaks, etc. and keep them safe and in good repair. During normal drilling operations duties include washing, cleaning, mechanical repairs, digging ditches, drill pipe connections, drill pipe trips and other manual handling and/or maintenance activities as required by operational needs. While tripping (adding additional pipe to the stand), the Lead Tong Hand must pull and install the busing assembly. This includes lifting the tongs and lateral movement of the tongs to attach them to the drill pipe. The tongs are on counterweights and the exertion required to lift them is estimated to be lifting between 10 to 30 pounds. The lifting range up or down is 1 to 2 feet, in the area of the waist. This activity is repeated and could be performed as many as 175 times in a 12 hour shift.   Pulling slips is also required. This activity is performed by 2 or 3 men (depending on crew size) and could be done as many as 175 times per a 12 hour shift. The slips weigh between 100 and 175 pounds and the weight would be distributed between the 2 or 3 employees. The slips are located at floor level and would be lifted a distance of 18-24 inches. Racking pipe is also required during a drill pipe trip and involves manually pushing a suspended length of pipe to the area where it is racked. The reverse activity involves restraining the suspended pipe and guiding it across the rig floor. This activity is performed in the standing position and could be performed as many as 100 times per a 12-hour shift. Tripping the pipe string is an operation which involves removing all of the pipe from the well bore and racking it in the derrick.  Employees may be involved in the tripping operation for the full 12 hours of their work shift. The Floor Hand is responsible for catching and cleaning samples of formation cuttings while drilling. If drilling in gas, he must keep the flare bucket burning. At times it is necessary for the Floor Hand to climb up in the derrick and assist the derrick hand such as bridling up or bridling down. He must also be able to go up and grease the traveling blocks and bridle line sheaves.   Duties Include:<ol><li>Making connections while drilling and tripping</li><li>Changing bits</li><li>Cleaning and performing maintenance work on the drilling rig</li><li>Assist in rigging down, moving and rigging up all parts of the rig</li><li>Miscellaneous tasks such as mixing mud, digging ditches and location cleanup</li></ol>  Requirements Include:<ol><li>Must be in good health and physical conditions; job duties are often physically strenuous</li><li>Must have some degree of mechanical aptitude and be capable of learning and performing job duties and be able to keep up with the rest of the crew</li><li>Must be capable of assuming responsibilities and maintaining good working relationships with co-workers</li><li>Must perform each operation in the safety manner possible as well as complying with all safety and health standards, rules, regulations and orders for the prevention of accidents</li><li>The employee is responsible for his/her own transportation to and from the work site and is expected to be on time</li></ol>  Physical Requirements Include:<ol><li>Must be able to stand for 10 to 12 hours and walk for about 3 hours throughout the workday</li><li>Must be able to lift/carry between 10 to 50 pounds frequently with occasional lifting of 20 to 100 pounds throughout the workday</li><li>Must be able to kneel, reach and regularly work at heights exceeding 4 feet above the work surface during the day as well as occasional bending throughout the workday</li><li>Must be able to grasp occasionally during the day and frequently push and pull objects throughout the workday</li></ol>About Cyclone Drilling, Inc At Cyclone Drilling, we believe that the hiring and training of good people is critical for the continued success of our company. The foundation of Cyclone Drilling’s success starts with solid leadership that knows how to foster a positive and safe work environment, while providing competitive compensation and benefits. If you believe in delivering high quality work and developing your talents in a team environment, then you would be a good addition to the Cyclone Drilling team. Employment opportunities exist in Colorado, North Dakota, Montana and Wyoming.  Cyclone Drilling is known for providing superior solutions through teamwork with our industry's leading professionals who complete tasks successfully.

Cyclone Drilling, Inc

Rig Position (Includes Floors, Motor, Derrick, Driller, Toolpusher)

Toolpusher jobs are hiring now on Monster. Explore the best opportunities on offer and apply quickly and easily.

Toolpusher Jobs in the United States

Jobs

Resume Resources

Similar Job Searches

Get noticed by top employers!

Toolpusher Jobs in the United States

Jobs

ToolpusherLewis Energy Group

Rig Position (Includes Floors, Motor, Derrick, Driller, Toolpusher)Cyclone Drilling, Inc

Resume Resources

Similar Job Searches