NewProduction Supervisor (Starlink) - 2nd Shift SpaceXProduction Supervisor (Starlink) - 2nd ShiftRedmond, WA$115,000–$160,000 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Manage an hourly workforce by assessing employee performance, providing positive/constructive feedback, facilitating conflict resolution, and addressing repeat issues with corrective actions, performance improvement plans or through disciplinary means.
Integration & Test Specialist (Bus & Payload Sub-Assemblies) - 2nd shift SpaceXIntegration & Test Specialist (Bus & Payload Sub-Assemblies) - 2nd shiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
CNC Machinist (Starlink) - 2nd Shift - Level 4/5 SpaceXCNC Machinist (Starlink) - 2nd Shift - Level 4/5Redmond, WA$38–$45 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink’s utility for communities and businesses around the globe.
Receiving Specialist (Starlink) - 2nd Shift SpaceXReceiving Specialist (Starlink) - 2nd ShiftWoodinville, WA$22–$24 / hourLeveraging advanced satellites and user hardware coupled with our deep experience with both spacecraft and on-orbit operations, Starlink delivers high-speed, low-latency internet to users all over the world. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Integration Technician (Starlink) - 2nd Shift SpaceXIntegration Technician (Starlink) - 2nd ShiftRedmond, WA$23–$29 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Test Specialist (Starlink) - 2nd Shift SpaceXTest Specialist (Starlink) - 2nd ShiftRedmond, WA$34–$40 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Test Specialist (Starlink) - 2Nd Shift Space Exploration TechnologiesTest Specialist (Starlink) - 2Nd ShiftRedmond, WA$34–$40 / hourYou may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.
Supervisor, Precision Machining - 2nd Shift SpaceXSupervisor, Precision Machining - 2nd ShiftWoodinville, WA$115,000–$160,000 / yearAs a technical leader, the Precision Machining Supervisor will meet customer rate demands, proactively identify and resolve production schedule issues, continuously develop and improve production processes, and inspire the team to achieve consistent machining excellence. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
SMT Specialist - 2Nd Shift Space Exploration TechnologiesSMT Specialist - 2Nd ShiftRedmond, WA$34–$40 / hourProvide solutions to streamline space-grade circuit board assembly and test processes which may include flying probe, AOI, and functional testing, reflow soldering, selective soldering, and conformal coating. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
NewSMT Specialist - 2nd Shift SpaceXSMT Specialist - 2nd ShiftRedmond, WA$34–$40 / hourProvide solutions to streamline space-grade circuit board assembly and test processes which may include flying probe, AOI, and functional testing, reflow soldering, selective soldering, and conformal coating. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Production Machinist Starlink - 2nd Shift Space Exploration Technologies CorpProduction Machinist Starlink - 2nd ShiftWoodinville, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron level tolerance machined parts at production volumes.
Production Machinist Starlink - 2nd Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 2nd Shift - Level 4/5Woodinville, WA$38–$45 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.
Diamond Turning Technician Starlink - 2nd Shift Space Exploration Technologies CorpDiamond Turning Technician Starlink - 2nd ShiftRedmond, WA$22–$26.50 / hourAbility to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Aerospace NAS410 NDT Inspector (Mag and Pen) - 2nd Shift Hytek FinishesAerospace NAS410 NDT Inspector (Mag and Pen) - 2nd ShiftKent, WA$21.80–$32.80 / hourThe individual in this role will be considered an Inspector Trainee until certified by the Level III NDT Responsible in each of the three disciplines of NDT Inspection performed at Hytek (Magnetic Particle, Liquid Fluorescent Penetrant, and Nital Etch) and are able to perform the work independently. Candidates must have previous NAS410 Level II certification in Fluorescent Magnetic Particle (Stationary Horizontal Wet Bench) and Fluorescent Liquid Penetrant (Methods A&B) in the Aerospace Industry, including well-documented OJT training hours.
Cannabis Production Worker 2nd Shift Green RevolutionCannabis Production Worker 2nd ShiftPoulsbo, WAExperience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. As a 2nd Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.).
Cannabis Production Worker 2Nd Shift Green RevolutionCannabis Production Worker 2Nd ShiftPoulsbo, WAExperience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. As a 2nd Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.).
Assembler I – 1st & 2nd Shift | Aerospace Kelly ServicesAssembler I – 1st & 2nd Shift | AerospaceSumner, WA$21.75–$25.75 / hourKelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. + Assemble aerospace components using hand and power tools, including rivet guns and pneumatic/air tools such as impact wrenches, ratchets, sanders, grinders, drills, and air hammers.
Sheetmetal Fabricator - 2nd Shift SonacaSheetmetal Fabricator - 2nd ShiftAuburn, Washington$20–$24 / hourCompletes required documentation, including but not limited to: manufacturing planning operation buy-off, recording of accurate part counts, labor card entry, set-up information, special notes, data collection plans, tie-in information and recording the disposition of non-conforming material. For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions.
CNC Machinist Starlink - 2nd Shift - Level 4/5 Space Exploration Technologies CorpCNC Machinist Starlink - 2nd Shift - Level 4/5Redmond, WA$38–$45 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We've only begun to scratch the surface of Starlink's potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink's utility for communities and businesses around the globe.
Fulfillment Coordinator Starlink Aviation - 2nd Shift Space Exploration Technologies CorpFulfillment Coordinator Starlink Aviation - 2nd ShiftWoodinville, WA$22–$25 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RESPONSIBILITIES: Coordinate and execute the timely shipment of customer kits containing aviation hardware, ensuring all orders are prepared, packed, and dispatched to meet customer installation schedules and delivery commitments.