NewSenior Welding Engineer System OneSenior Welding EngineerBellevue, WA$56–$95 / hourSystem One is seeking a Senior Welding Engineer for a yearlong contract role to work as part of a high-functioning team of engineers focused on materials processing, supply chain development and supplier qualification for next generation material and components for sodium-cooled fast reactors. Oversee test programs for qualification of welds, including mechanical properties, burst testing, thermal creep, creep-fatigue, neutron irradiation, thermal aging, and sodium exposure.
Weld Engineer System OneWeld EngineerBellevue, WA$63–$80 / hourThis is a hands-on, high-impact role where your weld engineering and metallurgy expertise will influence how advanced components are designed, tested, qualified, and transitioned into supplier-ready manufacturing processes. System One is seeking a highly motivated Weld Engineer to support a Materials Development & Qualification team advancing next-generation materials and components for sodium-cooled fast reactors .
NewSupplier Project Engineer, Supply Chain System OneSupplier Project Engineer, Supply ChainBellevue, WARemote$69–$115 / hourThe Supplier Project Engineer will provide oversight of supplier activities throughout the project lifecycle, ensuring contract requirements, technical expectations, schedules, and deliverables are successfully achieved. • Demonstrated experience supporting supplier relationships in engineering, manufacturing, or highly regulated industries.
NewSupplier Procurement Engineer – EPC Procurement Oversight System OneSupplier Procurement Engineer – EPC Procurement OversightBellevue, WARemote$69–$115 / hourThe ideal candidate will bring extensive supplier management, project management, and manufacturing oversight experience while supporting complex engineering procurements in highly regulated industrial environments. This role will serve as the primary interface for engineering, procurement, project management, contracts, and legal teams, ensuring successful execution of heavy industrial equipment procurements from planning through delivery.
Welding Engineer ProtingentWelding EngineerBellevue, WA$65–$85 / hourAbout Protingent: Protingent is an Award-Winning provider of top-tier Engineering and IT talent, trusted by companies at the forefront of innovation — from Software and Aerospace to AI, Clean Tech, Medical Devices, and Connected Technologies. Oversee test programs for qualification of welds such as mechanical properties, burst testing, thermal creep, creep-fatigue, neutron irradiation, thermal aging, and sodium exposure.
Welding Engineer Bee Talent SolutionsWelding EngineerBellevue, WA$63–$80 / hourThis role will work as part of a high functioning team of engineers focused on materials processing, supply chain development and supplier qualification for next generation material and components for sodium-cooled fast reactors. Oversee test programs for qualification of welds such as mechanical properties, burst testing, thermal creep, creep-fatigue, neutron irradiation, thermal aging, and sodium exposure.
Chief Engineer (Limited or DDE Unlimited)- Seattle/Tacoma Based - Seattle, WA FossChief Engineer (Limited or DDE Unlimited)- Seattle/Tacoma Based - Seattle, WASeattle, WAFull timeWith operations spanning all U.S. coasts and global transportation projects, Foss is a leader in harbor and terminal towage, tug and barge transportation, and offshore energy solutions, including traditional energy and offshore wind projects. Foss Maritime Company LLC is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Liquids Cryogenic Hardware Design Engineer III - Lunar Permanence Blue Origin LLCLiquids Cryogenic Hardware Design Engineer III - Lunar PermanenceSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Sr. Automation Controls Engineer Blue Origin LLCSr. Automation Controls EngineerSeattle, WAFull timeMinimum 6 years of hands-on experience developing and integrating industrial controls and automation systems from scratch - including PLC and HMI programming as core competencies, control system architecture design (network topology, I/O distribution, safety systems, multi-platform communication protocols), and broad exposure to industrial automation platforms such as robots, material handling systems (gantries, AGVs, conveyors), CNC machine integration, NDT, assembly, testing, and process tools (torque, welding, grinding, or similar). Develop offline simulations of automated systems - ranging from discrete work cells to fully automated product lines - tovalidatecontrol logic, robot paths, cycle times, and system behavior from concept through final design, including pre-programming and virtual commissioning prior to hardware availability.
Senior Fluids Design Engineer Blue Origin LLCSenior Fluids Design EngineerSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Manufacturing Engineer III/Sr. - Design for Automation Terex CorporationManufacturing Engineer III/Sr. - Design for AutomationRedmond, WAFull timeThe Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.
Equipment and Tool Engineers Apex Systems, Inc.Equipment and Tool EngineersRenton, WAFull timeIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.
Materials & Process Engineer III Blue Origin LLCMaterials & Process Engineer IIISeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Design Engineer I/II/Sr Terex CorporationDesign Engineer I/II/SrRedmond, WAFull timeThis is a product improvement design role for boom and scissor aerial lifts and will be tasked with improving current production designs, designing new product options, and troubleshooting manufacturing and field issues. We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry.
Senior Facilities Engineer Providence St. Joseph HealthSenior Facilities EngineerSeattle, WAFull timeIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.
Fluid Systems Design Engineer III: Upper Stage 9x4 Next Gen New Glenn Blue Origin LLCFluid Systems Design Engineer III: Upper Stage 9x4 Next Gen New GlennSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Welding Engineer - Technical Sales Representative Linde plcWelding Engineer - Technical Sales RepresentativeTacoma, WAAnd you will support additional technical and commercial initiatives as needed Lead the full sales cycle for automated capital equipment including robotics, welding automation, CNC automation, and material handling systems. Work with engineering teams to design system configurations, layouts, and integration plansnt customers and secure long-term relationships through straightforward agreements.
Sr. Welding Engineer Actalent IncSr. Welding EngineerTacoma, WA$120,000–$160,000 / yearThe engineer collaborates closely with cross-functional teams, troubleshoots complex welding issues, and leads initiatives that improve product quality, manufacturability, and operational performance while providing technical leadership and mentorship across the organization. Proven expertise in welding process engineering, including defining, validating, and optimizing welding parameters across TIG, MIG, resistance, and related processes in production environments.
Laser Operator - Welder (Multiple Shifts) Blue Origin LLCLaser Operator - Welder (Multiple Shifts)Seattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Welding & Fabrication Specialist Endurance EnergyWelding & Fabrication SpecialistSeattle, WashingtonYou’ll gain hands-on experience with GTAW and handheld laser welding of stainless steel, nickel alloys, and titanium while helping us manufacture the world’s first subsea geothermal power plant. By leveraging modular design, manufacturing scale, efficient drilling, and latent cooling on the seafloor, we are pioneering a new category of energy that outperforms traditional sources on both environmental impact and cost.
Frontline Leader (Welding) AllegionFrontline Leader (Welding)Snoqualmie, WashingtonThere is a frequent need to stand, stoop, walk, twist, bend, lift and move heavy objects (up to 70 pounds) and occasionally lift and move very heavy objects (up to 100 pounds) and perform other similar actions during the course of the workday. This role works closely with welding employees and collaborates with the day/swing shift Supervisors and Frontline Leaders for seamless continuation of activities and administrative support to reach production goals.
NewManufacturing Engineer I/II - Weld Engineer TerexManufacturing Engineer I/II - Weld EngineerRedmond, WA$80,000–$110,000 / yearWe design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Develop and evaluate Engineering Change Request (ECR)/Engineering Change Notice (ECN)/Special Manufacturing Instruction (SMI) proposals/processes for production, including design improvements, and prototyping.
Senior Weld Engineer ProtingentSenior Weld EngineerBellevue, WA$56–$95 / hourDemonstrated skills in developing requirements specifications, defining supplier technical work scope to include development of SOWs, RFPs and providing technical direction and oversight of supplier projects. Oversee test programs for qualification of welds such as mechanical properties, burst testing, thermal creep, creep-fatigue, neutron irradiation, thermal aging, and sodium exposure.
Senior Weld Engineer Averro IncSenior Weld EngineerBellevue, WAThis role is responsible for developing and qualifying welding processes for reactor core components, supporting materials testing programs, and working closely with suppliers to mature critical technologies. Lead weld process development and qualification activities for ferritic-martensitic steels, austenitic stainless steels, and other advanced alloys using technologies such as resistance pressure welding, TIG/GTAW, and laser welding.
Manufacturing Engineer II - Weld and Tank Blue Origin Enterprises LPManufacturing Engineer II - Weld and TankSeattle, WA$91,852–$128,592.45 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team of engineers, technicians, and specialists, you will partner closely with design engineering, quality, and production teams to support the development and execution of manufacturing processes for tanks and composite overwrapped pressure vessel (COPV) hardware.
Sr. Design Engineer, Structural/Mechanical GSE Blue Origin Enterprises LPSr. Design Engineer, Structural/Mechanical GSESouthgate, WA$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. The hardware presents real structural challenges: non-obvious load paths, tight integration interfaces, code-driven sizing (ASME B30.20/BTH-1, AISC-360, ASCE-7, Aluminum Design Manual), welded steel and aluminum structures, and energized subsystems where structural integrity is safety-critical.
NewProject Civil Engineer ACCURA ENGINEERING & CONSULTING SERVICESProject Civil EngineerSeattle, WAEducation/Experience: Bachelor's Degree in Engineering, preferably in Civil EngineeringCurrent Professional Engineer license within the State of AlaskaMinimum of 10 years' experience as structural engineer on large complex multimillion dollar federal construction projects, preferably USACE and/or Department of DefenseNon-destructive inspection (NDI) experience. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issuesPrepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items.
Senior Mechanical Engineer AIMSenior Mechanical EngineerSeattle, WashingtonPerform advanced mechanical analysis to inform you designs - from numerical analysis through to FEA as you consider material selection and designs to meet the environment your designs need to operate in, including fatigue, vibration, shock, and thermal considerations. We design mechanical systems that perform not just in CAD or simulation, but in real-world chaos: misalignment, wear, debris, hydraulic spray, operator variability, and global deployment.
Project Civil Engineer Accura EngineeringProject Civil EngineerSeattle, WashingtonJob Title: Project Civil Engineer ***Work Location: Anchorage, AK (JBER)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Serves as technical expert and advisor for control of civil and structural systems and related steel and welding features for federal construction projects. Documents reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings.
Materials Engineer ProtingentMaterials EngineerBellevue, WA$52–$85 / yearJob Qualifications: Minimum of 3 years of related experience with a B.S. degree; or 2 years with an M.S. degree; or equivalent experience; a degree in Materials Science/Engineering, Welding Engineering, or a related technical discipline is desired. Perform scientific analysis of test data (e.g., metallography, non-destructive inspection, mechanical properties, ductility) and generate technical reports to document new knowledge related to reactor design and qualification.
Structural Engineer II, Marine Vigor IndustrialStructural Engineer II, MarineSeattle, WA$112,000–$122,000 / yearVigor Marine Group takes pride in being the employer of choice for our employees, who in turn take great pride in their contributions to the communities where they live and work, and to their nation - through their living wage jobs supporting their local economies, and through the word-class maritime and industrial services they provide to further our defense readiness and national security. Evolving over decades from a collection of the best-in-class companies with unique and complementary capabilities on the East and West coasts, our spirit of innovation and legacy of performance make Vigor Marine Group a preferred, full-service prime contractor in the defense and maritime sectors.
Bakery Maintenance Engineer- Seattle (Weller St.) United States Bakery ExternalBakery Maintenance Engineer- Seattle (Weller St.)Seattle, WashingtonBakery Maintenance Engineers will perform required repairs and maintenance tasks as assigned in an orderly, timely, and cost-conscious manner on a variety of bakery production equipment, freezers, and/or facilities. Perform preventive maintenance, diagnostics, and repairs on bakery production equipment and facility systems, including mechanical and electrical components.
Staff Engineer, Mechatronics Design CelesticaStaff Engineer, Mechatronics DesignSeattle, WARemote$105,000–$150,000 / yearAs a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. + **Technical Sales Support:** Partner with the business development team to provide technical validation and feasibility **assessments during the pre-sales phase.** + **Requirements Translation** : Lead "Discovery" sessions with clients to extract functional requirements and translate them into technical specifications for the design team.
NewSupplier Quality Engineer Dogwood Industries LLCSupplier Quality EngineerEverett, WA$95,000–$120,000 / yearThis role will work closely with Procurement, Production, Engineering, Design/Detailing, Project Management, and Quality teams to proactively identify risks, resolve quality issues, improve supplier performance, and ensure that materials and components consistently meet established requirements. Dogwood Industries is at the forefront of designing and manufacturing Pre-engineered Panelized Relocatable Metal Buildings, delivering industry leading solutions for mission-critical projects across industrial and DoD markets.
Design Engineer II, Structural/Mechanical GSE Blue Origin Enterprises LPDesign Engineer II, Structural/Mechanical GSESouthgate, WA$99,201–$138,880.35 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Project Engineer (Civil/Structural Engineer) Accura EngineeringProject Engineer (Civil/Structural Engineer)Seattle, WashingtonJob Title: Project Engineer (Civil/Structural Engineer) ***Work Location: Anchorage, AK (JBER)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Serves as technical expert and advisor for control of civil and structural systems and related steel and welding features for federal construction projects. Documents reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings.
Engines: Materials and Processes Engineer I - Early Career (2026 Starts) Blue Origin Enterprises LPEngines: Materials and Processes Engineer I - Early Career (2026 Starts)Seattle, WA$81,313–$113,837.85 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Design Engineer III, Structural/Mechanical GSE Blue Origin Enterprises LPDesign Engineer III, Structural/Mechanical GSESouthgate, WA$121,023–$169,432.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Senior Mechanical Engineer Rice Lake Weighing SystemsSenior Mechanical EngineerKent, WashingtonThis role places a strong emphasis on strain gage-based load cell transducer design and development, including mechanical design for optimized strain distribution, signal sensitivity, and long-term stability. This role also requires working knowledge of the electrical aspects of load cell systems, including strain gage signal behavior, Wheatstone bridge circuits, signal normalization, and integration with instrumentation and control systems.
Electric Propulsion Engineer, Mechanical - Starlink Space Exploration Technologies CorpElectric Propulsion Engineer, Mechanical - StarlinkRedmond, WA$100,000–$120,000 / yearEstablish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line. You will get to oversee a critical system at the heart of the satellite, as you work cross-functionally with plasma physics experts, avionics engineers, and electrical engineers to develop propulsion hardware (thrusters, cathodes, regulators, and the fluid feed system).
NewMechanical Engineer IV INSPYR SolutionsMechanical Engineer IVRedmond, WA$40–$60 / hourInformation collected and processed through your application with INSPYR Solutions (including any job applications you choose to submit) is subject to INSPYR Solutions’ Privacy Policy and INSPYR Solutions’ AI and Automated Employment Decision Tool Policy: https://www.inspyrsolutions.com/policies/ . Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Senior Mechanical Engineer ASME Lead Averro IncSenior Mechanical Engineer ASME LeadBellevue, WAHands-on experience with ASME Boiler and Pressure Vessel Code Section III, including certifying Design Specifications and Design Reports for nuclear pressure-retaining components. Averro is a Veteran-Owned organization dedicated to delivering innovative talent solutions, business consulting, and technology services that propel businesses and careers forward.
Senior Mechanical Engineer ASME Lead (Chopper) Averro IncSenior Mechanical Engineer ASME Lead (Chopper)Bellevue, WAHands-on experience with ASME Boiler and Pressure Vessel Code Section III, including certifying Design Specifications and Design Reports for nuclear pressure-retaining components. Averro is a Veteran-Owned organization dedicated to delivering innovative talent solutions, business consulting, and technology services that propel businesses and careers forward.
Mechanical Design Engineer III Romac Industries IncMechanical Design Engineer IIIBothell, WA$105,700–$158,700 / yearYou'll define technical approaches, lead mid-sized projects, guide junior engineers and technicians through all stages of the product development cycle, from concept to production. In this senior-level role, you'll design, develop new products, improve existing ones by applying advanced engineering principles and creative problem-solving.
Boiler Plant Operating Engineer I/II Fred Hutchinson Cancer Research CenterBoiler Plant Operating Engineer I/IISeattle, WAThe Fred Hutch Boiler Plant Operating Engineer I/II is a building maintenance technician responsible for performing independently, tasks of a skilled nature, necessary for the operation, maintenance, and repair of Fred Hutch boilers, chillers, buildings, and support equipment. With a track record of global leadership in bone marrow transplantation, HIV/AIDS prevention, immunotherapy and COVID-19 vaccines, Fred Hutch has earned a reputation as one of the world's leading cancer, infectious disease and biomedical research centers.
Manufacturing Automation Engineer, Solar - Starlink Space Exploration Technologies CorpManufacturing Automation Engineer, Solar - StarlinkRedmond, WA$100,000–$117,500 / yearSoftware: PLC programming, preferably Beckhoff TwinCAT structured text, state machines, applying Object Oriented Programming to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, etc. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Lead, Mechanical Engineer L3Harris Technologies IncLead, Mechanical EngineerRedmond, WA$122,000–$227,000 / yearThis position requires highly-refined electro-mechanical and mechanical design skills that will be applied in designing and solving issues in the development and integration of high pressure/power and extreme temperature space hardware such as chemical and electric propulsion systems along with propulsion components such as injectors, reaction chambers, nozzles, cathodes, and magnetic accelerators for liquid rocket engines and electric propulsion thrusters, along with power processing units for electric propulsion thrusters. The selected candidate is considered a subject matter expert with comprehensive knowledge of the job area and will perform electro-mechanical and mechanical design engineering assignments requiring application of advanced engineering principles, theories and concepts to develop propulsion hardware for spacecraft programs.
Senior Associate, Quality Engineer Level 2 Apollo Professional Solutions IncSenior Associate, Quality Engineer Level 2Redmond, WARequired Skills & Competencies Successful candidates will bring strong technical and interpersonal capabilities, including: Excellent interpersonal and communication skills with the ability to build positive working relationships across operational groups, suppliers, customers, and all levels of the organization. Why This Role This opportunity is ideal for quality professionals looking to expand their impact within an aerospace manufacturing environment while working on meaningful projects that influence customer satisfaction, compliance, and operational success.
Tooling Engineer Gravitics, IncTooling EngineerSeattle, WA$110,000–$140,000 / yearAs a Tooling Engineer at Gravitics, you will design, analyze, and implement manufacturing tooling and fixtures used to build large-scale space structures such as pressurized space station modules, orbital carriers, and spacecraft subsystems. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Sr. Associate, Quality Engineer L3Harris Technologies IncSr. Associate, Quality EngineerRedmond, WAPreferred Additional Skills: Exceptional interpersonal and communication skills with the ability to effectively establish positive working relationships with various operational groups, all levels of employees, suppliers, and customers. Provide daily, hands-on quality support to production operations by monitoring processes, responding to quality concerns, and addressing operator questions, as required, to support program during production phase.