CNC Machinist Multi-spindle Multi-turret Lathe - 1st Shift

Salary Range: $26 - $44 per hour

About Us

Our precision Machining Operations are successful in CNY because we are low volume, high mix, and very tight tolerances. Our 80,000 square foot shop houses over 2 dozen CNC machines with a wide range of capabilities including 5 new machines over the last 2 years. We have a full manual machine shop along with precision grind, hone and deburr. Our entire workforce is under one roof including Design Engineering, R&D and Assembly & Test. We were founded in 1918 as Young & Franklin Tool Works on Franklin Street in Syracuse, but we've come a long way since then! We manufacture, assemble and test valves and actuators for the Aerospace and Power Generation markets. We hire talented people from a wide variety of backgrounds who share our enthusiasm for innovation, design, and manufacturing excellence. You should check out the best kept secret in Liverpool, NY!

Position Summary

Position is focused primarily on the setup and operation of a multi-spindle, multi-turret lathe. Applies inspection techniques to monitor the CNC process. Collaborates with colleagues to maximize productivity in the precision manufacturing of the highest quality valves & actuators for aerospace and power generation customers.

Responsibilities

• Read and interpret complex blueprints, shop travelers, and operation sketches for machined and/or fabricated parts.
• Inspect parts to specifications and document results.
• Installing fixtures and setting work offsets.
• Using an offline tool pre-setter, prepare and set tools needed for machining operations.
• Accurately and efficiently diagnose deviations and trends; adjust offsets to maintain quality product based on the analysis.
• Report machinery, tooling or quality issues to supervisor.
• Run multiple machine centers as required.
• Perform additional duties as assigned.

Education and Experience

• This position requires either a US Person (as defined in applicable export regulations) or a non-US person who is eligible to obtain required export authorization.
• Experience in set-up and operation of multi axis CNC machinery: 3 axis lathes minimum; 4/5 axis horizontal mills and pallet line experience a plus.
• High School Graduate or equivalent; technical certification or degree a plus.
• Ability to work from complex drawings containing GD&T.
• Ability to perform accurate manual inspections of parts produced.
• Solid understanding of G-code. Ability to program machines a plus.
• Experience with low volume, high mix production a plus.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Individuals may need to sit or stand as needed. May require frequent walking primarily on a level surface. Reaching above shoulder heights, below the waist or lifting as required to move materials throughout the workday. Proper lifting techniques required. May include lifting up to 25 pounds. May include frequent pulling, pushing, and grasping.
• The primary environment of this position is the manufacturing areas where under certain areas require the use of personal protective equipment such as safety glasses with side shields, hearing protection and proper footwear.

Employment Opportunity/Affirmative Action Employer, including disabled and veterans