Pipe Fitter / Welder Combo – ASME Code

Pipe Fitter / Welder Combo – ASME Code | Multiple Openings

Pay: $26.00–$32.00+ per hour (Based on Experience)
Location: Tulsa, OK Area
Current Schedule: Monday–Friday | 8:00 AM – 5:00 PM
Future Schedule Goal: Monday–Thursday | 6:00 AM – 5:30 PM
Job Type: Temp-to-Hire
Openings: 4–5 Positions Available
Start Date: ASAP
Job Order #: 154140

Position Overview

Stand-By Personnel is seeking 4–5 experienced Pipe Fitter / Welder Combos for immediate temp-to-hire opportunities in the Tulsa area. These positions require candidates who can both fit and weld pipe according to ASME Code requirements, read fabrication drawings, and produce quality work in an industrial environment.

Candidates must have previous hands-on experience with pipe fitting and welding. The ideal candidate is capable of preparing, fitting, and assembling pipe components while performing code-quality welds using MIG and Flux Core processes.

A 6G weld test is required, and candidates must demonstrate proper setup, joint preparation, welding technique, and attention to quality.

English-speaking, bilingual, and Spanish-speaking candidates are encouraged to apply.

Required Experience & Skills

Previous professional pipe fitting and welding experience required. Candidates must be capable of performing both responsibilities and producing welds that meet applicable ASME Code standards.

Strong blueprint-reading skills and the ability to interpret fabrication prints, welding specifications, and technical drawings are essential.

Candidates should have experience with MIG and Flux Core welding processes, pipe fit-up, joint preparation, and welding in the 6G position.

Ability to work independently, maintain accurate measurements, and follow established fabrication requirements is important.

Reliable transportation, dependable attendance, and a strong commitment to workplace safety are required.

Essential Duties & Responsibilities

Fit, assemble, and weld pipe components according to fabrication drawings, specifications, and applicable ASME Code requirements.

Read and interpret blueprints, shop drawings, and welding specifications to determine pipe layout, fit-up, and welding requirements.

Measure, position, align, and prepare pipe materials for welding. Complete applicable joint preparation, equipment setup, and material cleaning before beginning welding operations.

Perform MIG root and starting passes, followed by Flux Core fill and cap passes, according to applicable welding procedures.

Inspect completed work for visible defects, verify proper fit-up, and maintain consistent weld quality throughout production.

Maintain clean and organized work areas, follow established welding and fabrication procedures, and comply with all company safety requirements.

Perform additional pipe fitting, welding, and fabrication responsibilities as assigned.

Pipe Fitting & Fabrication

Candidates must have hands-on experience fitting and assembling pipe components according to fabrication specifications.

Responsibilities include interpreting drawings, measuring materials, preparing joints, positioning components, and maintaining accurate alignment before welding.

Strong attention to dimensional accuracy and proper fit-up is essential.

ASME Code Welding

Candidates must be capable of performing pipe welding according to applicable ASME Code requirements.

Responsibilities include following approved welding procedures, preparing weld joints correctly, maintaining consistent welding technique, and producing quality welds.

Candidates should understand the importance of proper penetration, weld consistency, and adherence to established fabrication standards.

MIG & Flux Core Welding

This position requires proficiency with MIG and Flux Core welding processes.

Candidates should be comfortable performing MIG root and starting passes, followed by Flux Core fill and cap passes, according to the required welding procedure.

Strong knowledge of weld preparation, equipment setup, and welding technique is important.

Required 6G Weld Test

Candidates must successfully complete a 6G Super Coupon Weld Test.

The test includes:

• 
  6G pipe welding position
  
• 
  MIG root / starting pass
  
• 
  Flux Core fill and cap
  
• 
  Proper equipment and material setup
  
• 
  Required weld preparation and cleanup
  
• 
  Completion of the required weld test form
  

Candidates must demonstrate the ability to perform the required welding processes while maintaining applicable quality standards.

Blueprint Reading & Specifications

Candidates must be able to read and interpret pipe fabrication prints, technical drawings, and welding specifications.

Responsibilities include identifying dimensions, determining component positioning, following applicable welding requirements, and verifying completed work against fabrication specifications.

Quality & Safety

Maintain consistent workmanship while following applicable ASME Code requirements and company quality standards.

Inspect completed fit-up and welds for visible defects, identify fabrication concerns, and communicate issues promptly.

Follow all company safety procedures, use required PPE, and maintain safe welding and fabrication practices throughout the workday.

Preferred Qualifications

Previous experience as a Pipe Fitter / Welder Combo, Pipe Welder, Industrial Pipe Fitter, or ASME Code Welder is highly valuable.

Experience with 6G pipe welding, MIG root passes, Flux Core fill and cap, industrial pipe fabrication, and code-quality welding is strongly preferred.

Candidates who can independently perform both pipe fitting and welding responsibilities are encouraged to apply.

Physical Requirements & Work Environment

Ability to stand and walk for extended periods throughout the shift. Frequent bending, kneeling, reaching, lifting, carrying, positioning, pushing, and pulling may be required.

Candidates must be comfortable performing physically demanding pipe fitting and welding work in an industrial fabrication environment.

Work involves regular exposure to welding equipment, metal components, grinders, sparks, heat, and fabrication machinery.

All required PPE and company safety procedures must be followed.

Schedule Requirements

Current Schedule: Monday–Friday | 8:00 AM – 5:00 PM

Future Schedule Goal: Monday–Thursday | 6:00 AM – 5:30 PM

The employer is working toward transitioning to a four-day workweek. The future schedule is a goal and is not guaranteed.

Candidates must be available for the current schedule and willing to accommodate future scheduling changes.

Why You'll Want This Opportunity

• 
  $26.00–$32.00+ per hour, based on experience
  
• 
  4–5 immediate openings
  
• 
  Temp-to-hire opportunity with long-term potential
  
• 
  Opportunity to utilize specialized pipe fitting and welding skills
  
• 
  Work with ASME Code fabrication requirements
  
• 
  Perform MIG and Flux Core pipe welding
  
• 
  Potential future four-day workweek
  
• 
  English-speaking, bilingual, and Spanish-speaking candidates welcome
  
• 
  Excellent opportunity for experienced Pipe Fitter / Welder Combos seeking industrial fabrication work in the Tulsa area
  

Ready to Apply?

EXPERIENCED PIPE FITTER / WELDER COMBOS NEEDED IMMEDIATELY!

Apply today for consideration and reference Job Order #154140.

Candidates must have previous pipe fitting and welding experience and be prepared to complete the required 6G Super Coupon Weld Test.

Apply online or call/text 918-576-7117 for more information.

You can also apply in person at:

Stand-By Personnel – Claremore
507 E. Will Rogers Blvd.
Claremore, OK 74017

Office Hours: Monday–Tuesday | 8 AM – 5 PM
Wednesday–Friday | By Appointment

Call to schedule an appointment outside regular in-office hours.

Stand-By Personnel — Helping People, Changing Lives.