Precision CNC Milling Setup Specialist

Step into a day where precision meets momentum

You clock in for 2nd Shift, Monday–Thursday, ready to turn setups into smooth-running production. Your first task: verify the job traveler, pull the fixtures, and load the tooling you’ve selected. You dial in work offsets and tool lengths, run the first piece, and confirm it hits spec before releasing the job to production. When a dimension drifts, you troubleshoot the root cause—tool wear, a fixture tweak, a minor program edit—and get the line back on track. All while keeping the area clean, safe, and efficient so you can enjoy that three-day weekend ahead.

What you’ll make happen

• Complete end-to-end setups on established CNC milling jobs with minimal supervision.
• Interpret blueprints, setup sheets, job travelers, and work instructions accurately.
• Install and adjust vises, fixtures, probes, tooling, tool holders, and other workholding.
• Set tool lengths, work and fixture offsets; perform tool changes and minor program edits.
• Run and approve first-piece quality prior to production release.
• Monitor machine performance; diagnose tooling, dimensional, or process issues quickly.
• Hit production rates while reducing scrap and avoiding downtime; communicate delays early.

Quality you can measure

• Perform first-piece, in-process, and final inspections.
• Use precision measuring equipment to verify parts meet blueprint and customer specs.
• Identify, segregate, and report nonconforming material; complete all required documentation.
• Follow ISO/IATF procedures and inspection standards without compromise.

Technical problem-solver

• Make targeted program edits when needed.
• Troubleshoot issues tied to tooling, fixtures, or part quality and restore process capability.
• Recommend improvements that increase throughput and reduce downtime.

Team-first mindset

• Partner with operators, quality, supervisors, and fellow machinists to keep work moving.
• Coach less experienced operators and setup techs; share best practices.
• Communicate status and concerns promptly and professionally.
• Champion continuous improvement across the department.

Safety in every move

• Maintain a clean, organized, and safe workspace.
• Follow all company safety procedures and machining best practices.
• Report unsafe conditions, near-misses, injuries, or equipment issues immediately.
• Know and use emergency stop procedures and machine safety protocols.

What you bring

Required

• High school diploma or GED.
• At least 2 years of CNC mill setup experience performing complete setups on production jobs.
• Ability to read blueprints and setup documentation.
• Hands-on experience with precision measurement tools.
• Strong command of tooling, work/fixture offsets, and speeds & feeds.
• Comfort with minor program edits and mechanical troubleshooting.
• Reliable transportation, dependable attendance, and the ability to work independently.

Preferred

• Background with vertical machining centers; exposure to multi-axis machining.
• Familiarity with Fanuc or Haas controls.
• Experience in a high-volume production environment.
• Familiarity with JobBOSS or similar manufacturing software.
• Knowledge of lean manufacturing and continuous improvement.

How we define success

• Pride in producing precision parts to exact specifications.
• Consistency and dependability.
• Ownership of problems—and solutions.
• Attention to detail while sustaining productivity.
• Positive teamwork and collaboration.
• Continuous pursuit of better efficiency and quality.
• Curiosity to learn and grow your machining skill set.

Role clarity

This Role Is

• Independent setups on established CNC milling jobs.
• Troubleshooting machining, tooling, and production issues.
• Supporting operators and keeping production efficient.
• Producing precision parts that consistently meet customer specs.

This Role Is Not

• Entry-level machine operation.
• Programming-only work.
• Push-button production.

Compensation & benefits

• $24–$28 per hour based on experience
• Direct Hire Position
• Medical, Dental, and Vision Insurance
• 401(k)
• Paid Time Off
• Education Assistance

Schedule

• Full-Time
• 2nd Shift
• Monday–Thursday
• Four 10-Hour Shifts
• Three-Day Weekend Every Week

Physical requirements

• Stand up to 10 hours per shift.
• Lift up to 25 pounds.
• Strong manual dexterity and attention to detail.
• Ability to remain focused during repetitive precision tasks.

Career Growth

We promote from within. Demonstrate initiative, leadership, and technical excellence to grow into CNC Programming, Manufacturing Engineering, Quality, Production Leadership, and other technical roles.

You should be proficient in:

• Troubleshooting Skills
• Preventive Maintenance & Inspection
• CNC Machine Setup & Changeover
• Precision Measurement & Hand Metrology
• Aerospace Manufacturing
• Machine Setups for Production Runs
• High School / GED

Machines & technologies you'll use:

• CNC Mill (3-4 axis VMC) (Bridgeport, Haas)
• EDM Machine (Wire)
• CNC Mill (5+ axis VMC)

Enjoy a four-day work week with three-day weekends while building your career with a growing precision manufacturing company.

Position Overview

CCT Enterprises is seeking an experienced 2nd Shift CNC Mill Set-Up Technician to set up, operate, troubleshoot, and maintain CNC milling machines while meeting all quality, safety, and production standards.

What Makes Someone Successful at CCT

The people who thrive here are hands-on, dependable, detail-focused, collaborative, and driven to improve.

Apply today if you want more than a job—build a long-term career in precision manufacturing.

Safety & Housekeeping

Maintain an organized and safe work area, follow safety procedures, and report issues immediately.

Quality & Inspection

Perform first-piece, in-process, and final inspections; document results; follow ISO/IATF standards.

Technical Skills & Troubleshooting

Perform minor program edits and resolve machining issues related to tooling, fixtures, or part quality.

Teamwork & Training

Collaborate across the shop and assist in training newer team members.

Production & Set-Up

Own complete machine setups and keep production flowing with minimal scrap and downtime.

Required Qualifications

2+ years of CNC mill setup, blueprint literacy, measurement skills, minor edits, and independent work.

Preferred Qualifications

VMC/multi-axis experience; Fanuc/Haas familiarity; high-volume machining; JobBOSS; lean/CI knowledge.

What This Role Is (and Is Not)

This is a hands-on setup role—not entry-level, not programming-only, and not push-button production.

Compensation & Benefits

$24–$28/hour (DOE), plus medical/dental/vision, 401(k), PTO, and education assistance.

Schedule

Full-time, 2nd shift, Mon–Thu, four 10-hour shifts, three-day weekends.

Physical Requirements

Stand 10 hours; lift 25 lbs; dexterity; sustained focus on precision tasks.

Machines & Technologies

3–4 axis VMCs (Bridgeport, Haas), wire EDM, and 5+ axis VMCs.

You should be proficient in troubleshooting, PM & inspection, CNC setup, precision measurement & hand metrology, aerospace manufacturing, and setups for production runs; HS/GED required.

Career Growth

Advance into Programming, Mfg Engineering, Quality, and Production Leadership as you grow.

Enjoy a four-day week and three-day weekends—every week.

Legal

Additional Requirements

Due to CCT Enterprises' federal firearms license (FFL) and company hiring standards, applicants must not have any felony convictions, pending felony charges, or other disqualifying criminal history.