Plastipak Packaging, Inc.NewManufacturing Production Technician Plastipak Packaging, Inc.Manufacturing Production TechnicianAberdeen, MDAs a Production Technician, you operate equipment to manufacture plastic containers for leading consumer brands. Monitor machine settings (heat control, water cooling temperatures, hydraulic pressure).
System OneManufacturing Automation/ Commissioning Engineer System OneManufacturing Automation/ Commissioning EngineerYork, PASupport installation, startup, and system validation activities at customer sites, including Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT). System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America.
TruRootsNewManufacturing/Production/Machine Operator TruRootsManufacturing/Production/Machine OperatorHavre De Grace, MDAble to climb, twist, and bend at the knees and back, maneuver in tight spaces, lift objects up to 50 pounds regularly and push/pull objects up to 75 pounds occasionally, differentiate between colors, work in non- temperature-controlled conditions (hot or cold), and able to stand and walk a minimum of 70% of the time. We are dedicated to creating a diverse and inclusive work environment where all employees are treated with dignity, respect, and fairness.
Northrop Grumman CorpManufacturing Analyst / Principal Manufacturing Analyst Northrop Grumman CorpManufacturing Analyst / Principal Manufacturing AnalystBaltimore, MD$72,400–$108,600 / yearBasic Qualifications: Bachelor's degree with 2 years of experience in Manufacturing, Materials, MRP, Production Control, Supply Chain or Business Coordination; Master's degree with experience in Manufacturing, Materials, MRP, Production Control, Supply Chain or Business Coordination; 6 years of experience in Manufacturing, Materials, MRP, Production Control, Supply Chain or Business Coordination may be considered in lieu of degree requirement. Bachelor's degree with 5 years of experience in Manufacturing, Materials, MRP, Production Control, Supply Chain or Business Coordination; Master's degree with 3 years of experience in Manufacturing, Materials, MRP, Production Control, Supply Chain or Business Coordination; 9 years of experience in Manufacturing, Materials, MRP, Production Control, Supply Chain or Business Coordination may be considered in lieu of degree requirement.
Apollo Professional SolutionsManufacturing Engineer II - Portable Metrology Apollo Professional SolutionsManufacturing Engineer II - Portable MetrologyYork, PARetrieving quality data and communicating results and statuses to internal and external customers SKILLS PREFERRED: Manufacturing Engineer II - Portable Metrology Engineering experience with relevant applications in a defense environment. Surphaser) JOB DESCRIPTION: Manufacturing Engineer II - Portable Metrology Conduct inspection and dimensional report generation utilizing laser trackers, Faro arms and high volume scanners.
American Hydro CorpManufacturing Production Scheduler American Hydro CorpManufacturing Production SchedulerYork, PASteeped in a tradition of hydropower, American Hydro is a leading supplier and installer of large equipment for the hydro electric industry, specializing in design, engineering, precision CNC manufacture, upgrades and servicing of high-performance, hydro-turbines and large pumps. Cross-Functional Collaboration: Success in this role requires the ability to work closely and collaboratively with operations, supply chain, Project Controls, Project management teams to align schedules and resolve any bottlenecks.
Oceaneering International IncNewSr. Manager, Manufacturing Production Operations Oceaneering International IncSr. Manager, Manufacturing Production OperationsHanover, MD$138,300–$207,500 / yearSkilled in supervising and guiding sub‑functions that rely on ERP usage, including work order management, material transactions, labor entry, and routing updates, ensuring consistent and compliant system use across the team. The Production Manager is responsible for managing all production and systematic functions in support of OTECH programs, which includes the activities of the Manufacturing, Assembly, and Field Specialist groups as well as other Production staff.
Rocket Lab CorpSenior Manufacturing Engineer, Machining Rocket Lab CorpSenior Manufacturing Engineer, MachiningMiddle River, MD$115,000–$165,000 / yearImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
L3Harris Technologies IncAssociate Manager, Manufacturing Engineering L3Harris Technologies IncAssociate Manager, Manufacturing EngineeringHanover, MD$104,000–$155,000 / yearSupport design engineering during the design / development process to ensure that the design represents a cost-effective solution in terms of reliability, producibility, and supportability and meets the performance requirements over the life of the product. Develop and implement manufacturing engineering plans and schedules including process flows, test and inspection points, flow tags, assembly aids, use of automated test equipment, training needs and requirements.
ST Engineering North AmericaManufacturing Program Manager ST Engineering North AmericaManufacturing Program ManagerBaltimore, MD$88,200–$141,300 / yearA pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio.
Rocket Lab CorporationManufacturing Engineer I Rocket Lab CorporationManufacturing Engineer IMiddle River, MD$80,000–$95,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
McCormick & Co IncFLAVOR MANUFACTURING TECH I - C Shift McCormick & Co IncFLAVOR MANUFACTURING TECH I - C ShiftHunt Valley, MD$21.07–$31.61 / hourWith over $6 billion in annual sales across 160 countries and territories, we manufacture, market, and distribute spices, seasoning mixes, condiments, and other flavorful products to the entire food industry including e-commerce, retail,food manufacturers and foodservice businesses. Our most popular brands include McCormick, Frenchs, Franks RedHot, Stubbs, OLD BAY, Lawrys, Zatarains, Ducros, Vahiné, Cholula, Schwartz, Kamis, DaQiao, Club House, Aeroplane, and Gourmet Garden.
Schindler Holding LtdManufacturing CNC Programmer Schindler Holding LtdManufacturing CNC ProgrammerHanover, PAResponsibilities include the following: Proficient use of OEM programming software for punching, bending and laser machines for daily production sheet metal manufacturing. Include continues improvement / lean manufacturing techniques and processes to advance safety, quality, delivery and decrease cost into the products and facility.
Schindler Holding Ltd2nd Shift Manufacturing CNC Programmer Schindler Holding Ltd2nd Shift Manufacturing CNC ProgrammerHanover, PAResponsibilities include the following: Proficient use of OEM programming software for punching, bending and laser machines for daily production sheet metal manufacturing. Include continues improvement / lean manufacturing techniques and processes to advance safety, quality, delivery and decrease cost into the products and facility.
Voith GmbH & Co KGaAQuality Engineering, Manufacturing Voith GmbH & Co KGaAQuality Engineering, ManufacturingYork, PASupport/audit/train QC inspectors mapping/indication matrix processes for documentation of as-found condition of rehab components and general mapping of NDE/Inspection results, this includes means and methods of documentation, streamlining the documentation and storage processes. Review/Audit/Perform component status for release for shipment, work with QA/QC and manufacturing management for proper collection of manufacturing records (laser, general dimensional inspection, NDE, paint/coating testing, hydrostatic/leak testing, … Etc.) and nonconformance's.
GAF Materials LLCManufacturing QA Lab Technician II-Night Shift (10pm-6am) GAF Materials LLCManufacturing QA Lab Technician II-Night Shift (10pm-6am)Baltimore, MD$52,000–$71,500 / year4. Other exciting programs and perks are available to help employees achieve work-life balance, including (but not limited to) a wellness program, free financial coaching, a referral program, and product rebates when purchased for an employees primary residence. The QA Lab Technician II will perform various quality systems and testing activities for manufacturing operation, including raw material and process fluid testing, quality audits, plant trials, and quality lab maintenance and organization.
The Hillman Group IncManager, Manufacturing Operations The Hillman Group IncManager, Manufacturing OperationsEast York, PAEmployees are expected and encouraged to participate in safety and health program activities including immediately reporting hazards, immediately reporting unsafe work practices and incidents to supervisors, wearing required personal protective equipment, and participating in and supporting safety committee activities. Lead production strategy and operations for chain and fittings manufacturing, ensuring alignment with business, safety, and quality objectives.
Rocket Lab CorporationManufacturing Engineer I/II Rocket Lab CorporationManufacturing Engineer I/IIMiddle River, MD$77,000–$119,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Sia Partners SASChemistry, Manufacturing and Controls (CMC) Lead Sia Partners SASChemistry, Manufacturing and Controls (CMC) LeadBaltimore, MD$164,000–$173,000 / yearThis consulting division works with healthcare organizations, pharmaceutical & biotech companies, CROs, academia, medical device/diagnostic companies, and non-governmental organizations (NGOs) alike to solve complex business, scientific, regulatory, technological and product development challenges. This individual will work closely with the Managing Director, functional area leads across Regulatory, Quality, Nonclinical, Discovery, Clinical, Project Management, and Government Services, as well as external CDMO partners and regulatory agencies.
Sia Partners SASChemistry, Manufacturing and Controls (CMC) Senior Lead Sia Partners SASChemistry, Manufacturing and Controls (CMC) Senior LeadBaltimore, MD$180,000–$200,000 / yearThis consulting division works with healthcare organizations, pharmaceutical & biotech companies, CROs, academia, medical device/diagnostic companies, and non-governmental organizations (NGOs) alike to solve complex business, scientific, regulatory, technological and product development challenges. This individual will work closely with the Managing Director, functional area leads across Regulatory, Quality, Nonclinical, Discovery, Clinical, Project Management, and Government Services, as well as external CDMO partners and regulatory agencies.
The Hillman Group IncArea Mgr, Manufacturing Operations The Hillman Group IncArea Mgr, Manufacturing OperationsEast York, PAEmployees are expected and encouraged to participate in safety and health program activities including immediately reporting hazards, immediately reporting unsafe work practices and incidents to supervisors, wearing required personal protective equipment, and participating in and supporting safety committee activities. Provides first‑line leadership for production employees and is responsible for the safe, efficient, and compliant execution of daily manufacturing operations.
The Hillman Group IncManufacturing Technician I The Hillman Group IncManufacturing Technician IEast York, PAEmployees are expected and encouraged to participate in safety and health program activities including immediately reporting hazards, immediately reporting unsafe work practices and incidents to supervisors, wearing required personal protective equipment, and participating in and supporting safety committee activities. This role focuses on learning equipment operation, following defined work instructions, performing basic operator maintenance, and completing initial quality checks to ensure products meet established specifications.
Northrop Grumman CorpManufacturing Professional Training Lead / Staff Project Manager Northrop Grumman CorpManufacturing Professional Training Lead / Staff Project ManagerBaltimore, MD$126,400–$219,500 / yearThe Manufacturing Professional Training Lead owns the end‑to‑end learning strategy for all manufacturing support functions (industrial engineering, manufacturing engineering, production control, etc.) This role designs, delivers, and continuously improves professional‑development programs that enhance technical competence, safety awareness, and leadership capabilities, ensuring the workforce can meet current production demands and future growth initiatives. This training professional will collaborate with instructional design staff and subject matter experts to identify, plan, create, design, test, implement, deliver, support, and maintain effective and engaging learning opportunities and training activities through a variety of modalities (self-paced, in-person, mobile, virtual, video, job aids, microlearning, articles, etc.).
American Red Cross Blood ServicesBlood Component Manufacturing Technician American Red Cross Blood ServicesBlood Component Manufacturing TechnicianBaltimore, MDAmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce. Good computer skills, ability to use a wide variety of programs and laboratory equipment, attention to detail, accurate documentation, and good decision-making skills.
Harley-DavidsonSupervisor Manufacturing (York, PA, US) Harley-DavidsonSupervisor Manufacturing (York, PA, US)York, PA$74,700–$112,100 / yearSupports bargaining unit employees in rotation groups with team leaders in the manufacturing, assembly, fabrication, distribution, and/or development of motorcycles or motorcycle component parts. Employees at York also perform a variety of manufacturing operations, including fabrication, welding, polishing and painting and produce a wide range of current and replacement parts for all models.
Harley-Davidson IncSupervisor Manufacturing Harley-Davidson IncSupervisor ManufacturingYork, PA$74,700–$112,100 / yearSupports bargaining unit employees in rotation groups with team leaders in the manufacturing, assembly, fabrication, distribution, and/or development of motorcycles or motorcycle component parts. Employees at York also perform a variety of manufacturing operations, including fabrication, welding, polishing and painting and produce a wide range of current and replacement parts for all models.
Amrize LtdManufacturing Technology Leader Amrize LtdManufacturing Technology LeaderMDRemoteABOUT THE ROLE: The Isocyanurate Technology Leader will develop and improve the polyisocyanurate insulation board manufacturing process in the ISO facilities within Amrize. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test.
Butler Aerospace and DefenseManufacturing Engineer Butler Aerospace and DefenseManufacturing EngineerParadise, PAConducts tests and measurements throughout stages of production to determine control over applicable variables; and services, troubleshoots and solves production process problems with processes or equipment already in operation. Communicates with internal stakeholders and external customers to manage complex manufacturability issues from identification through resolution.
Harley-Davidson IncSr. Engineer, Advanced Manufacturing Harley-Davidson IncSr. Engineer, Advanced ManufacturingYork, PA$90,700–$140,800 / yearDemonstrates in-depth conceptual and practical knowledge in the manufacturing process development and implementation, and is responsible for supporting and delivering the Life Cycle Plan from concept to production at our various manufacturing plants. Employees at York also perform a variety of manufacturing operations, including fabrication, welding, polishing and painting and produce a wide range of current and replacement parts for all models.
TechDigitalManufacturing Engineering Lead TechDigitalManufacturing Engineering LeadSparks, MDKey responsibilities:Vendor selection and negotiation: Coordinate the selection of new vendors and lead contract negotiations to secure favourable terms, pricing, and conditions. Cross-functional collaboration: Work with internal departments like procurement, legal, and finance to align vendor activities with company goals and project requirements.
RHI Magnesita GmbHManufacturing Engineer - Operations Leadership Track RHI Magnesita GmbHManufacturing Engineer - Operations Leadership TrackYork, PAFrom advanced lithium-ion batteries for laptops and EVs and specialized glass on smartphones and tablets, to the steel and cement that build the world around us, our high-performance bricks and linings make it possible to melt, bend, shape, and refine these materials at extreme temperatures. RHI Magnesita is hiring Manufacturing Engineers to join our Operations Leadership Track, designed for engineers who want to apply technical expertise on the plant floor while building toward plant leadership.
Kratos Defense & Security Solutions IncManufacturing Production Engineer Kratos Defense & Security Solutions IncManufacturing Production EngineerDallastown, PArn Generates work orders for each drawing for fabrication or assembly of parts in a timely and cost-effective manner. rn Implements drawing changes as needed by re-ordering materials and changing shop work orders and methods.
Coca-Cola Consolidated IncOperator Manufacturing I Coca-Cola Consolidated IncOperator Manufacturing IBaltimore, MDJob Overview The Operator Manufacturing I is responsible for performing various tasks to operate and monitor assigned production equipment following established procedures and guidelines, while adjusting machine settings to complete tasks accurately, according to specifications, and in a timely fashion. Competitive Benefits: Health coverage + paid time off Purpose-Driven: Create meaningful impact in the communities you serve Training & Support: Ongoing learning opportunities Join us - your refreshing new chapter starts here!
LatitudeMaintenance Technician (Manufacturing Industry Experience) LatitudeMaintenance Technician (Manufacturing Industry Experience)Baltimore, MarylandThe ideal candidate will have hands-on experience in a fast-paced manufacturing environment and a strong understanding of mechanical, electrical, pneumatic, and hydraulic systems to ensure maximum equipment uptime and safe operations. We are seeking a skilled Maintenance Technician with a strong background in the manufacturing industry to support the maintenance, troubleshooting, and repair of production equipment and facility systems.
Voith GmbH & Co KGaAEngineer III, Manufacturing Voith GmbH & Co KGaAEngineer III, ManufacturingYork, PARequired Skills/Abilities - Effective teamwork and collaboration skills Ability to lead a small group of other Engineers Excellent verbal and written communication skills Ability to prioritize tasks based on business needs Excellent time management skills with a proven ability to meet deadlines Education and Experience BS in Mechanical Engineering or related engineering field Typically at least 7 to 10 years of relevant manufacturing, engineering, or mechanical experience Demonstrate effective collaboration teamwork skills Ability to multi-task based on business needs Excellent time management skills Proficiency in Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.) Strong CAD experience Where required by local regulations, an engineering license may be required Physical Requirements - The employee is required to talk and/or hear in an office and manufacturing setting. Responsibilities - Support the manufacturing of hydro turbine/generator products in the Voith Hydro York facility Perform manufacturing process analysis of turbine/generator components and develop changes to process based on safety, quality, schedule, and cost Design shop tooling as necessary to support manufacturing processes Performing necessary design calculations (as required) by employing common engineering principles and using hand calculations, proprietary Voith design tools.
Northrop Grumman CorpNewManager Manufacturing Training 2 Northrop Grumman CorpManager Manufacturing Training 2Sykesville, MD$115,000–$199,700 / yearThis training professional will collaborate with training staff and subject matter experts to identify, plan, create, design, test, implement, deliver, support, and maintain effective and engaging learning opportunities and training activities through a variety of modalities (self-paced, in-person, mobile, virtual, video, job aids, microlearning, articles, etc.). 3-5 years teaching experience (will consider military experience) including designing and developing formal course curriculums, establishing workforce development training needs, developing goals and objectives, developing training programs, and applying the ISD process.
BAE Systems PlcManufacturing Engineer 3rd Shift ACV Assembly/Test BAE Systems PlcManufacturing Engineer 3rd Shift ACV Assembly/TestYork, PAfor description visit the url https://jobs.baesystems.com/global/en/job/BAE1US123045BREXTERNAL/Manufacturing-Engineer-3rd-Shift-ACV-Assembly/Test.
L3Harris Technologies IncNewManufacturing Technician D L3Harris Technologies IncManufacturing Technician DHanover, MD$49,000–$91,000 / yearPerform coarse and fine adjustments requiring the use of hand tools, precision measuring devices and other specialized equipment including, but not limited to vacuum equipment, digital indicators, optical microscopes, height gages, Vernier gages, micrometers, and electronic testing fixtures. Familiar with the function of and use a broad range of electrical/electronic and mechanical parts and components such as fiber optics, solder, wire, resistors, diodes, capacitors, relays, transformers, coils, switches, PC boards, epoxies, crimping etc.
Harley-Davidson IncStaff Engineer Advanced Manufacturing Harley-Davidson IncStaff Engineer Advanced ManufacturingYork, PA$119,300–$184,800 / yearLead assembly process development and solve complex problems involving medium to large- scale projects from concept to development, through capital funding planning and approval, and ultimately through successful implementation using analytical thought, exercising judgment, and identifying innovative solutions. The Staff Engineer - Advanced Manufacturing (Assembly) plays a key role in the manufacturing process development and implementation and is responsible for supporting and delivering the Life Cycle Plan from concept to production at our various manufacturing plants.
Saft America, Inc.Sr. Manufacturing Quality Engineer Saft America, Inc.Sr. Manufacturing Quality EngineerCockeysville, Maryland$100,000–$140,000 / yearQuality Engineer will implement APQP/PPAP methodologies (Flow Charts, MSA, PFMEAs, Control Plans, Statistical Process Control), maintain detailed Control Plan currency, manage/monitor processes and scrap/rework for undesirable trends and take/document action(s). Since 2016, Saft is a wholly owned subsidiary of TotalEnergies, a global integrated energy company that produces and markets various forms of energy, including oil, biofuels, natural gas, green gases, renewables, and electricity.
Textron IncDirector, Manufacturing Ops Air, Land, Sea Textron IncDirector, Manufacturing Ops Air, Land, SeaHunt Valley, MD$173,900–$268,500 / yearStrategy Develop and execute roadmap to achieve long-term operational success Establish and execute capital planning for the manufacturing functions Develop and execute the manufacturing strategies in support of New Product Development (NPD) that satisfy near term demands of development programs and support long term vision of transitioning to a full rate production Process Communicate problem resolution to customers and senior management Analyze data, identify areas of opportunity, and implement improvements or corrective actions to address inefficiencies or quality issues Develop manufacturing and quality plans in support of Proposals and Awarded Programs Budgeting Develop manufacturing Cost Bids for proposals as well as initial baseline budgets and estimates to completes for awarded programs Manage direct and indirect budgets Tools Maintain and improve the Enterprise Quality Dashboard Maintain and improve the Warehouse Dashboard Maintain and improve the Planning Dashboard Maintain and improve the resource Load/Capacity System Qualifications Required Skills Bachelor's Degree in a discipline related to Supply Chain Management, Operations, Engineering, Science, or Mathematics. Six Sigma Green Belt, Black Belt certification preferred Strong organizational and time management skills, close attention to detail, and be able to effectively handle multiple priorities Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software Strong analytical skills and the ability to identify trends and establish proactive corrective actions.
ECoreManufacturing Machine Operator ECoreManufacturing Machine OperatorYork, Pennsylvania$18–$22In order to determine whether Form I-9 documentation is valid, this employer may use E-Verify's photo screening tool to match the photograph appearing on some permanent resident and employment authorization cards with the official U.S. Citizenship and Immigration Services' (USCIS) photograph. Machines in Operation:Stamper Operator: Operate press machines to punch tiles, auto-stack products, and perform quality checks.
Danaher CorpManufacturing Engineer Danaher CorpManufacturing EngineerTimonium, MD$95,000–$120,000 / yearFrom airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper-everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. The Manufacturing Engineer's responsibilities include the support of manufacturing operations in the production of filtration products by improving Safety, Ergonomics, On Time Delivery (OTD), Productivity and increasing yields of manufacturing activities.
Textron IncManufacturing Program Manager - Sea Textron IncManufacturing Program Manager - SeaHunt Valley, MD$110,500–$167,900 / yearResponsibilities to Include: Represent Operations on the Program IPT's supporting assigned programs Represent program needs on the Operations Leadership team o Coordinate between operations functional leaders to ensure successful execution o Flow critical information both ways between operations and programs o Communicate program schedule and cost priorities Lead cross functional, multi-site teams through the various execution activities including facilities and resource planning, manufacturing readiness, supply chain health, quality requirements, and process development. Establish overall manufacturing schedule and coordinate details with operations Master Scheduler to ensure on time completion Coordinate program and design schedules with the manufacturing and supply chain Establish and track execution metrics across operations and supply chain and report metrics to ELT as needed Coordinate key purchases/sub-contracts with external supply chain to include flow down of all contract and quality requirements Execute Operations CAM EVMS planning and execution for execution tasks including Operations labor, both support and touch, and material.
BAE Systems PlcManufacturing Engineer - Fabrication 3rd Shift BAE Systems PlcManufacturing Engineer - Fabrication 3rd ShiftYork, PAfor description visit the url https://jobs.baesystems.com/global/en/job/BAE1US125042BREXTERNAL/Manufacturing-Engineer---Fabrication-3rd-Shift.
Adhesives Research IncDirector of Manufacturing Adhesives Research IncDirector of ManufacturingGlen Rock, PAAdditional Responsibilities: Responsible for operational strategy consistent with overall business/divisional strategy; participates in overall business strategy formulation, annual business planning, budget forecasting; manages and executes. Conducts all aspects of position in a professional, respectful manner consistent with AR Guiding Principles and the Corporate Quality Policy; embraces & champions 6S LEAN culture; organizes personnel workspace and appearance consistent with corporate professional image.
Rocket Lab USAManufacturing Engineer I/II Rocket Lab USAManufacturing Engineer I/IIMiddle River, MD$77,000–$119,000 / yearFull timeImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Aminov Search PartnersMaintenance Supervisor – Manufacturing – Union Aminov Search PartnersMaintenance Supervisor – Manufacturing – UnionBaltimore, MD$115,000–$115,000 / yearDrive continuous improvement efforts in partnership with technical personnel, targeting process enhancements, operational efficiency, and cost reduction. - Architect comprehensive maintenance strategies, emphasizing timely schedule adherence and equipment reliability to reduce downtime and boost efficiency.
Knorr-Bremse AGManufacturing Engineer Knorr-Bremse AGManufacturing EngineerWestminster, MD$75,900–$113,900 / yearKnorr Brake Company is the innovative leader in the manufacture and supply of braking systems, passenger doors and climate-control equipment for all types of Mass Transit customers such as: • METRO • Light Rail Vehicles • High-Speed Trains • Commuter Rail • Monorail Vehicles for the North America market. Knowledge: • new project analysis support tooling needed for the line • Technical work instructions • line balancing • time studies Skills Able to handle different tasks and processes at the same time Production environment Complex assemblies Processes with multiple steps CAD modeling 3d printing CNC experience is a plus.
Northrop Grumman CorpU105 Manufacturing Operations Maintenance Technician - 4th Shift Northrop Grumman CorpU105 Manufacturing Operations Maintenance Technician - 4th ShiftBaltimore, MDMust possess an Associate's Degree (minimum 60 semester hours) or two years (minimum 60 semester hours) of college level study with a major in Electronics or a minimum of six months military electronics school, plus two years working experience in the maintenance and repair of electro-mechanical equipment. Maintain in working order fabrication, assembly and test equipment used in the production and test of ceramic and organic multilayer interconnections, surface mount assemblies, microelectronic assemblies, electronic combat assemblies, antenna assemblies, and other system assemblies/subassemblies.