LifePoint Health IncNuclear Medicine Technician LifePoint Health IncNuclear Medicine TechnicianFlorence, ALOur diversified healthcare delivery network spans 29 states and includes 63 community hospital campuses, 32 rehabilitation and behavioral health hospitals, and more than 170 additional sites of care across the healthcare continuum, such as acute rehabilitation units, outpatient centers and post-acute care facilities. North Alabama Medical Center is a 263-bed facility offering the community's only open-heart surgery site, a complete line of women's and children's services and a complete line of medical and imaging services.
EnergySolutions LLCNuclear Turbine Manager EnergySolutions LLCNuclear Turbine ManagerAthens, ALStakeholder Engagement: Communicate with other department heads, corporate leadership, and external partners to ensure turbine operations are fully aligned with overall plant objectives.\n \nQualifications\n\n Education: Bachelor's or Master's degree in Mechanical Engineering, Nuclear Engineering, Electrical Engineering, or a related field. Integrity: Commitment to ethical conduct, transparency, and responsible stewardship of nuclear assets.\n \nKey Competencies\n\n Strategic Planning: Ability to develop long-term turbine maintenance and upgrade strategies that support safe, efficient operations.\n
Baptist HealthNuclear Medicine Technologist (NMT) Baptist HealthNuclear Medicine Technologist (NMT)HOMEWOOD, AlabamaWith inpatient and outpatient services, our professional team of radiologists and radiology technicians makes sure that each diagnostic imaging test or interventional radiology procedure is performed efficiently and with your comfort in mind. They perform dose preparation and administration functions for diagnostic and/or therapeutic purpose; perform patient procedures, process, and enhance images, and prepare images for interpreting physician to view.
Enercon Services, Inc.Nuclear Physical Security Design Engineer Enercon Services, Inc.Nuclear Physical Security Design EngineerBirmingham, Alabama$120,000–$165,000 / yearExperience in the design, installation, and testing of large scale (complete systems) digital control and computer monitoring system upgrades at power plants preferredTypes of upgrades include replacement of Turbine/Generator Control Systems with DCS platforms, process computer, and cybersecurity systems. In this dynamic role, you’ll forge powerful relationships with both internal teams and external clients, especially in the cutting-edge field of Physical Security, while leading engineering efforts to deliver innovative solutions.
Novelis Bay Minette Manufacturing FacilityAutomation Technician Novelis Bay Minette Manufacturing FacilityAutomation TechnicianBay Minette, AlabamaLocation Profile: Novelis' newly announced Bay Minette facility will be located 35 miles northeast of Mobile AL and 45 miles west of Pensacola FL and is expected to create approximately 1000 high-paying advanced careers in modern manufacturing. Support Mechanical and Electrical crews on troubleshooting sequencing or controlling breakdowns by accessing computer logics, follow PLCs signals, inspecting automation devices like sensors and instruments.
Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician III Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IIIAuburn, ALSteel American Welding Society (AWS) Certified Welding Inspector (CWI), or Structural Steel and/or nondestructive testing services: ASNT Level II Facilities Relevant certification for the services or project requirements (e.g. ICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding.
Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician II Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IIAuburn, ALICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide.
Terracon Consultants IncEngineering Technician I Terracon Consultants IncEngineering Technician IMadison, ALCommunicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Essential Roles and Responsibilities: Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties.
Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician I Terracon Consultants IncConstruction Materials Testing (CMT) Engineering Technician IAuburn, ALRequirements: High school diploma or equivalent 6 months experience required Valid driver's license with acceptable violation history Preferred Certification: Obtain Nuclear Density Gauge certification within 6 months of hire Required Certification: Obtain ACI certification within 90 days of hire Successful completion of related internal safety certifications. Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide.
General Dynamics Mission Systems, IncSenior Machinist Technician General Dynamics Mission Systems, IncSenior Machinist TechnicianCullman, AL$27.10–$29.72 / hourAs a Machinist for General Dynamics Mission Systems (GDMS) Precision Structures & Optics (PSO) located in Cullman, AL, you’ll be a member of a cross functional team responsible for manufacturing Beryllium products for use in the most demanding applications, across the aerospace, defense, and nuclear industries. General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation.
TSCNPI Electrical Engineering Technician TSCNPI Electrical Engineering TechnicianHuntsville, AlabamaAs an NPI Engineering Technician – Electrical Focus at TSC, you'll be a key hands-on contributor to new product introduction efforts, working alongside Manufacturing Engineering, the Design/R&D Engineering team, and Operations to support board-level bring-up, sub-assembly integration, test bench and rack assembly, and test process validation from early prototype through production readiness. Support Production Readiness Review (PRR) preparation by identifying equipment and test readiness gaps, collecting readiness evidence, and contributing inputs to NPI readiness checklists and workbook artifacts.
TSCNPI Mechanical Engineering Technician TSCNPI Mechanical Engineering TechnicianHuntsville, AlabamaAs an NPI Engineering Technician – Mechanical Focus at TSC, you'll be a key hands-on contributor to new product introduction efforts, working alongside Manufacturing Engineering, the Design/R&D Engineering team, and Operations to build and mature electro-mechanical products from early prototype through production readiness. High school diploma or GED and 4+ years of relevant electro-mechanical assembly or manufacturing technician experience; or Associate degree in Engineering Technology or related field and 3+ years; or Bachelor's degree in a related technical field and 1+ years.
General Dynamics CorpSenior Machinist Technician General Dynamics CorpSenior Machinist TechnicianCullman, ALWe encourage you to apply if you have any of these preferred skills:Experience in the manufacture of tight tolerance, complex geometry precision products, particularly within an aerospace or medical component machine shopAbility to work from blueprints, advanced drawings, process sheets and sketches to perform machining operations with precision, quality, and safetyAnalytical and problem-solving skills; able to troubleshoot and resolve issues in a quick, effective mannerRepresentative Duties:Set up and operate CNC machines to produce precision partsSelect and install appropriate cutting tools, fixtures, and machine attachmentsLoad programs into CNC machines and make necessary code editsRead and interpret engineering drawings, blueprints, schematics, and GD&TUnderstand tolerances, material specs, and critical dimensionsModify existing CNC programs using G-CodeRecommend tooling and programming improvements to increase efficiency and reduce scrapFollow all safety procedures and use PPEWork with engineers, quality inspectors, and supervisors to solve machining issuesCommunicate effectively during shift handovers and team meetingsContribute to continuous improvement efforts. THIS IS A 2ND SHIFT POSITION ROLE AND POSITION OBJECTIVES:As a Machinist for General Dynamics Mission Systems (GDMS) Precision Structures & Optics (PSO) located in Cullman, AL, youll be a member of a cross functional team responsible for manufacturing Beryllium products for use in the most demanding applications, across the aerospace, defense, and nuclear industries.
Thompson Engineering IncConstruction Materials Testing Field Technician (CMT) Thompson Engineering IncConstruction Materials Testing Field Technician (CMT)Birmingham, ALPhysical Requirements: • Ability to work flexible schedules and overtime as required by operational needs • Ability to lift and carry a minimum of 50 pounds • Ability to safely operate a company vehicle • Ability to read and write in English • Ability to work on uneven terrain, including concrete, gravel, dirt, and grass • Ability to work at elevated heights and in open structures • Ability to work outdoors for extended periods in varying weather conditions • Ability to wear required personal protective equipment (PPE). Qualifications: • Minimum Requirements: • High school diploma or equivalent • Minimum of six (6) months of construction materials testing experience • ACI Level I Certification or ability to obtain Nuclear Gauge Certification • Ability to communicate effectively, both verbally and in writing • Valid drivers license • Ability to read and write in English • Willingness to travel to various job sites as required • Level and compensation commensurate with experience.
AstrionEngineering Technician III AstrionEngineering Technician IIIRedstone Arsenal, AlabamaMechanical – At least 4 years of the 5 years’ experience must include successful completion of 1 year of vocational/military/technical school training in practical or industrial arts and a minimum of 2 years of mechanical fabrication and structural/fixture setup supporting engineering or testing of military hardware. 5 years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or 2 years of applicable college/vocational/military/technical school and 3 years of applicable experience in the assigned specialty area; and the following additional requirements.
SanminaSCA - Engineering Technician - (108367) SanminaSCA - Engineering Technician - (108367)Huntsville, ALFrom avionics to tactical and airborne communications, counter-UAS, integrated manufacturing and cradle-to-grave product life cycle support, we deliver high-reliability solutions that keep service members connected and protected in the field. Job DescriptionAt SCI Technology, a Sanmina Company, we serve those who serve by delivering innovative, trusted and comprehensive products and services that meet and exceed the unique needs of the Defense and Aerospace sector.
Element Materials TechnologySnubber Technician I Element Materials TechnologySnubber Technician IHuntsville, Alabama$22–$32 / hourHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access.
Element Materials TechnologySnubber Technician II Element Materials TechnologySnubber Technician IIHuntsville, Alabama$26–$38 / hourHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access.
Cardinal Health IncPharmacy Technician Cardinal Health IncPharmacy TechnicianBirmingham, ALNuclear Pharmacy is responsible for providing radiopharmaceuticals and other drugs to medical care providers under highly regulated State and Federal guidelines may also consult with or advise physicians and nuclear medicine technologists on the safe and efficacious use of radioactive drugs for diagnosis and therapy. Many of your duties will include: Assists pharmacist and other pharmacy staff in preparing facility for daily operations through cleaning, equipment and quality control testing.
The Structures Company, LLCAerospace Avionics Technician - DEFENSE The Structures Company, LLCAerospace Avionics Technician - DEFENSEMaxwell AFB, AL$35Troubleshoot conventional weapons systems, electronic and electro-mechanical components, fire control systems, electro-environmental systems, subassemblies, alternate mission equipment, and test equipment. As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.
Building & Earth Sciences, Inc.Construction Materials Testing Technician I Building & Earth Sciences, Inc.Construction Materials Testing Technician IMontgomery, ALMinimum Education, Training, Certifications and/or Experience• High School diploma or equivalent• Minimum 6 months Experience• ACI Concrete Field Testing Technician Level I Certification• Portable Nuclear Gauge Safety Training Certification• Understanding of Proctor Compaction Test and USCS Soil Classification• Trained & demonstrated competency in One-Point Proctor testing in the field. The position requires an incumbent to be trained to:• Receive, understand and execute written and verbal directions• Review specifications for civil and structural plans and identify sections applicable to the scope of work• Perform tests, general construction inspections and observations according to project requirements with some supervision.•
Team Industrial Services IncLevel I Heat Treat Technician Team Industrial Services IncLevel I Heat Treat TechnicianMobile, ALAbout Team: TEAM, Inc. is a global leader in integrated asset integrity solutions, offering high-quality inspection, heat treating, and specialized maintenance services to the refining, petrochemical, power, pipeline, aerospace, and other industrial sectors. Candidates with additional experience in induction or combustion heat treating methods are highly encouraged to apply, as this role may support a wide range of thermal processing scopes in field and shop environments.
Axient LLCEngineering Technician III Axient LLCEngineering Technician IIIRedstone Arsenal, ALMechanical - At least 4 years of the 5 years' experience must include successful completion of 1 year of vocational/military/technical school training in practical or industrial arts and a minimum of 2 years of mechanical fabrication and structural/fixture setup supporting engineering or testing of military hardware. 5 years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization; or 2 years of applicable college/vocational/military/technical school and 3 years of applicable experience in the assigned specialty area; and the following additional requirements.
Building & Earth Sciences, Inc.Construction Materials Testing Technician II Building & Earth Sciences, Inc.Construction Materials Testing Technician IIMontgomery, ALMinimum Education, Training, Certifications and/or Experience • High School diploma or equivalent• Minimum 12 months Experience• ACI Concrete Field Testing Technician Level I Certification• Portable Nuclear Gauge Safety Training Certification• Understanding of Proctor Compaction Test and USCS Soil Classification• Trained & demonstrated competency in One-Point Proctor testing in the field.• The position requires an incumbent to be trained to: • Receive, understand and execute written and verbal directions• Review specifications for civil and structural plans and identify sections applicable to the scope of work• Perform tests, general construction inspections and observations according to project requirements with little to no supervisor.•
Element Materials Technology Group LtdSnubber Technician I Element Materials Technology Group LtdSnubber Technician IHuntsville, AL$22–$32 / hourRemoval and Reinstallation - Removes and reinstalls snubbers• Perform Testing - Performs qualification, acceptance testing and RND testing for nuclear customers• Maintenance - Maintains and rebuilds snubbers• Under close supervision, able to complete basic technical and mechanical procedures including basic testing and maintenance on snubbers• Some interaction with clients• Able to assist with basic troubleshooting and basic interpretation and analysis of test results• Basic knowledge of Nuclear testing principles and basic safety practices; Basic understanding in developing processes and procedures, test reports for qualification and acceptance testing. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Element Materials Technology Group LtdSnubber Technician II Element Materials Technology Group LtdSnubber Technician IIHuntsville, AL$26–$38 / hourRemoval and Reinstallation - Removes and reinstalls snubbers• Perform Testing - Performs qualification, acceptance testing and RND testing for nuclear customers• Maintenance - Maintains and rebuilds snubbers• Under close supervision, able to complete basic technical and mechanical procedures including basic testing and maintenance on snubbers• Some interaction with clients• Able to assist with basic troubleshooting and basic interpretation and analysis of test results• Basic knowledge of Nuclear testing principles and basic safety practices; Basic understanding in developing processes and procedures, test reports for qualification and acceptance testing. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Building & Earth Sciences IncConstruction Materials Testing Technician I Building & Earth Sciences IncConstruction Materials Testing Technician IHuntsville, ALMinimum Education, Training, Certifications and/or Experience• High School diploma or equivalent• Minimum 6 months Experience• ACI Concrete Field Testing Technician Level I Certification• Portable Nuclear Gauge Safety Training Certification• Understanding of Proctor Compaction Test and USCS Soil Classification• Trained & demonstrated competency in One-Point Proctor testing in the field. The position requires an incumbent to be trained to:• Receive, understand and execute written and verbal directions• Review specifications for civil and structural plans and identify sections applicable to the scope of work• Perform tests, general construction inspections and observations according to project requirements with some supervision.•
General Dynamics Mission Systems, IncManufacturing Operations Technician General Dynamics Mission Systems, IncManufacturing Operations TechnicianCullman, AL$27.10–$29.72 / hourAs a Manufacturing Operations Technician for General Dynamics Mission Systems (GDMS) Precision Structures & Optics (PSO), you’ll be a member of a cross functional team responsible for preparing and conditioning surfaces to achieve precise geometric forms and tolerances as specified by prints and/or sketches. Measures work piece with instruments such as electronic gauges and optical light, compares work piece dimensions with specifications to ascertain amount of stock to be removed and evaluates types of compounds, diamonds, and laps or material needed to achieve required specifications and set-up requirements.
Building & Earth Sciences IncConstruction Materials Testing Technician II Building & Earth Sciences IncConstruction Materials Testing Technician IIHuntsville, ALMinimum Education, Training, Certifications and/or Experience • High School diploma or equivalent• Minimum 12 months Experience• ACI Concrete Field Testing Technician Level I Certification• Portable Nuclear Gauge Safety Training Certification• Understanding of Proctor Compaction Test and USCS Soil Classification• Trained & demonstrated competency in One-Point Proctor testing in the field.• The position requires an incumbent to be trained to: Receive, understand and execute written and verbal directions• Review specifications for civil and structural plans and identify sections applicable to the scope of work• Perform tests, general construction inspections and observations according to project requirements with little to no supervisor.•
Yulista SolutionsRTC - Engineering Technician IV Yulista SolutionsRTC - Engineering Technician IVRedstone Arsenal, AlabamaMust have at least two of the following: 1) Must be a graduate of an accredited technical school, college, or military school with training in electronics theory, 2) Possess a valid FCC license with demonstrated proficiency in electronics theory and application, 3) Possess a valid FAA Airframe license, or a minimum of four (4) years of avionics or armament experience, or four (4) years of avionics or armament experience. Yulista provides full on-site / off-site maintenance flight/Functional Check Flight operations to support the US Army Flight Test Directorate AFTD at Redstone Arsenal, AL.
ParsonsCBRN Technician ParsonsCBRN TechnicianAlabamaConduct CBRN detection operations at the direction of federal staff to include coordinating with stakeholders, managing equipment, planning logistics, developing plans, teaching and training equipment protocols to stakeholders, reporting information as appropriate, notifying chain of command as appropriate, writing situational reports and after-action reports, and following up with the stakeholder in post-deployment communications. Knowledgeable and skilled in using a variety of equipment including but not limited to Mobile/Portable Radiation Detection Systems, Personal Radiation Detectors PRD Spectroscopic/Non-Spectroscopic; Radiological Isotope Identification Device RIID High-Res/Low-Res; Auxiliary Equipment: Radios, Radioactive Material Sources.
General Dynamics CorpManufacturing Operations Technician General Dynamics CorpManufacturing Operations TechnicianCullman, AL$25.66–$27.47 / hourAs a Manufacturing Operations Technician for General Dynamics Mission Systems (GDMS) Precision Structures & Optics (PSO) located in Cullman, AL, youll be a member of a cross functional team responsible for performing hand deburring, lapping, and polishing operations to print specifications involving precision tolerances on Beryllium products for use in the most demanding applications, across the aerospace, defense, and nuclear industries. General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation.
Science Applications International CorpEngineering Technician IV Science Applications International CorpEngineering Technician IVHuntsville, ALOur robust portfolio of offerings across the defense, space, civilian, and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services. By providing the information below and checking the boxes referenced, you acknowledge and consent to SAIC''s Privacy Policy to include access and use of your information for the purposes of sharing your information for possible employment recruitment effects by SAIC and it''s third party vendors.
S&ME, Inc.Entry-Level Construction Materials Engineering Technician S&ME, Inc.Entry-Level Construction Materials Engineering TechnicianHuntsville, ALS&ME is looking for a hard-working Entry-Level Construction Materials Engineering Technician ready for hands-on learning to join our Construction Services team in Huntsville, Alabama. As an entry-level Construction Materials Engineering Technician, you enjoy starting your day outdoors and take pride in hands-on work that impacts the projects you work on.
AmentumAerospace Welding Technician (ET5) AmentumAerospace Welding Technician (ET5)Huntsville, AlabamaThe selected candidate must have demonstrated experience performing Gas Tungsten Arc Welding and/or Variable Polarity Plasma Arc welding processes on aerospace materials such as aluminum (alloys 2219 and 2195 preferred), stainless steel, superalloys and/or titanium performed by manual and mechanized techniques. The Senior Aerospace Welding Technician must work closely with ASED and customer engineers and technicians to provide integrated support to resolve complex problems pertaining to development and execution of welding and manufacturing development and demonstration projects.
Amentum Services IncAerospace Welding Technician (ET5) Amentum Services IncAerospace Welding Technician (ET5)Huntsville, ALThe selected candidate must have demonstrated experience performing Gas Tungsten Arc Welding and/or Variable Polarity Plasma Arc welding processes on aerospace materials such as aluminum (alloys 2219 and 2195 preferred), stainless steel, superalloys and/or titanium performed by manual and mechanized techniques. The Senior Aerospace Welding Technician must work closely with ASED and customer engineers and technicians to provide integrated support to resolve complex problems pertaining to development and execution of welding and manufacturing development and demonstration projects.
Blue OriginTechnician - Assembly and Integration (Levels I, II, III, Sr) Blue OriginTechnician - Assembly and Integration (Levels I, II, III, Sr)Huntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Blue OriginTechnician - Assembly & Integration Blue OriginTechnician - Assembly & IntegrationHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Blue Origin Enterprises LPTechnician - Tube Shop Blue Origin Enterprises LPTechnician - Tube ShopHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Karman Holdings IncSenior Engineering Technician Karman Holdings IncSenior Engineering TechnicianDecatur, ALHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems.
General Dynamics Mission Systems, IncManufacturing Technician General Dynamics Mission Systems, IncManufacturing TechnicianCullman, AL$31.98–$35.07 / hourMeasures work piece with instruments such as electronic gauges and optical light, compares work piece dimensions with specifications to ascertain amount of stock to be removed and evaluates types of compounds, diamonds, and laps or material needed to achieve required specifications and setup requirements. Good understanding of chemicals (acids, bases, oxidizers, flammables, reducers, water reactives) in a variety of forms (liquids, solids, gases, sludges, slurries) and related incompatibilities to prevent undesirable chemical reactions.
Blue Origin Enterprises LPTechnician - Assembly and Integration III Blue Origin Enterprises LPTechnician - Assembly and Integration IIIHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Blue Origin Enterprises LPTechnician - Assembly & Integration III Blue Origin Enterprises LPTechnician - Assembly & Integration IIIHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Blue OriginTechnician - Assembly & Integration III Blue OriginTechnician - Assembly & Integration IIIHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Actalent IncEngineering Integration Technician Actalent IncEngineering Integration TechnicianMadison, AL$24–$26 / hourIf you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market.
AstrionEngineering Technician 1 - 3rd Shift AstrionEngineering Technician 1 - 3rd ShiftHuntsville, AlabamaEnsure that simulated environments such as rain, salt, fog, high and low temperature, high and low humidity, altitude, etc. are properly calibrated and maintained. Communicate with engineers, technicians, and customers to discover and develop requirements, with the goal of optimizing and improving current and future processes.
Karman Holdings IncEngineering Technician II Karman Holdings IncEngineering Technician IIDecatur, ALHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems.
AmentumThermography Engineering Technician-NDE (ET4-ET6) AmentumThermography Engineering Technician-NDE (ET4-ET6)Huntsville, AlabamaThe Non-Destructive Evaluation and Damage Tolerance Group serving the Non-Destructive Evaluation and Damage Tolerance Branch (EM21) at Marshall Space Flight Center (MSFC) in Huntsville, AL has an opening for an Engineering Technician,with certifications and training in Thermography, to execute job duties in Non-destructive Evaluation (NDE). The Thermography Engineering Technician will: Operate and maintain NDE testing equipment, such as thermography equipment: thermal wave imaging systems, infrared cameras, including troubleshoot equipment/ system problems, identify corrective actions, and implement corrective actions upon approval.
Amentum Services IncNewThermography Engineering Technician-NDE (ET4-ET6) Amentum Services IncThermography Engineering Technician-NDE (ET4-ET6)Huntsville, ALOverview: The Non-Destructive Evaluation and Damage Tolerance Group serving the Non-Destructive Evaluation and Damage Tolerance Branch (EM21) at Marshall Space Flight Center (MSFC) in Huntsville, AL has an opening for an Engineering Technician, with certifications and training in Thermography, to execute job duties in Non-destructive Evaluation (NDE). Responsibilities: The Thermography Engineering Technician will: Operate and maintain NDE testing equipment, such as thermography equipment: thermal wave imaging systems, infrared cameras, including troubleshoot equipment/ system problems, identify corrective actions, and implement corrective actions upon approval.
General Dynamics CorpManufacturing Technician General Dynamics CorpManufacturing TechnicianCullman, ALRemote$31.98–$35.07 / hourKey Responsibilities: Measures work piece with instruments such as electronic gauges and optical light, compares work piece dimensions with specifications to ascertain amount of stock to be removed and evaluates types of compounds, diamonds, and laps or material needed to achieve required specifications and setup requirements. Good understanding of chemicals (acids, bases, oxidizers, flammables, reducers, water reactives) in a variety of forms (liquids, solids, gases, sludges, slurries) and related incompatibilities to prevent undesirable chemical reactions.