80 Results for

1st Shift Education Jobs in Greenwood, WA

Jobs

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Woodmont Beach, WA21 days ago

Full-time
Employee

Woodmont Beach, WA21 days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA30+ days ago

Full-time
Employee

This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in the facility. Prioritizes and processes orders from certification department; verifies documentation is complete and places orders in the proper area for shipping via Hytek truck or common carrier.

New!

Woodmont Beach, WA4 days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.

New!

Woodmont Beach, WA4 days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

l learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Renton, WA30+ days ago

Full-time
Employee

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.

Renton, WA25 days ago

Full-time
Employee

The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Renton, WA25 days ago

Full-time
Employee

E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

Renton, WA25 days ago

Full-time
Employee

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:

Kent, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Kent, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Ability to see/hear/feel constantly - hearing protection required when working in the area Occasionally exposed to moving mechanical parts, fumes or airborne particles, and fumes from metal finishing chemicals. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

New!

Marysville, WA3 days ago

$17.13–$24.57 Per Hour

Annual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.

Mukilteo, WA8 days ago

$30–$35 Per Hour

KEY RESPONSIBILITIES + Operate CNC machines to produce components, monitoring machining processes, and making real-time adjustments as needed for optimal performance + Conduct thorough quality inspections using precision measurement instruments (calipers, micrometers, gauges, etc.) to verify part dimensions and quality + Make necessary tool changes, offsets, and program adjustments based on production requirements and engineering specifications + Perform routine and preventive maintenance tasks on CNC machines, including cleaning, lubrication, and tool changes. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production.

Woodinville, WA24 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour

Woodinville, WA10 days ago

$38–$45 Per Hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour

Redmond, WA22 days ago

$32–$40 Per Hour

RESPONSIBILITIES: + Execute new product introduction builds across all work centers + Assist with initial PCBA line setup, facility requests, and programming of equipment + Program, load, and operates automated equipment + Design custom fixtures for PCBA to ensure efficient process flow + Train technicians to run/troubleshoot complex machines + Triage non-conforming product and drives resolution and preventative actions + Resolve production issues while ensuring design integrity, product quality, and delivery timelines + Perform process development and validation on new models in extremely aggressive timelines + Ensure the successful transition of a product's development + Identify continuous improvement opportunities for yield, performance, and cost + Define maintenance schedules and support activities + Optimize and configure processes and equipment for building surface mount electronics assemblies + Perform design of experiments (DOE) to optimize SMT process yield + Specify equipment requirements for new PCBA build processes + Develop design for manufacturability (DFM) guidelines for PCBA designs + Provide solutions to streamline space-grade circuit board assembly and test processes which may include flying probe, AOI, and functional testing, reflow soldering, selective soldering, and conformal coating + Resolve production issues on the spot while ensuring design integrity allowing us to stay on schedule + Facilitate a close relationship with the engineering team during design, build, and test to provide design feedback BASIC QUALIFICATIONS: + High school diploma or equivalency certificate and 2+ years of professional experience in a hands-on manufacturing environment; OR bachelor's degree in an engineering, math or science discipline + 2+ years of experience working in SMT or PCBA process engineering PREFERRED SKILLS AND EXPERIENCE: + Strong work ethic and drive to succeed + Ability to work in a fast paced, autonomously driven, and demanding start-up atmosphere + Excellent communication skills, both written and verbal + Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware + Hands on experience with optimizing SMT pick and place, reflow oven, conformal coating, or through hole soldering systems ADDITIONAL REQUIREMENTS: + Must be able to work all required shift hours, overtime, and weekends as needed. Estimated shift times; 1st Shift: 6:00AM - 4:30PM + Must be able to lift 25 pounds unassisted + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position COMPENSATION & BENEFITS: Pay range: SMT Specialist /Level 1: $32.00 - $40.00/hour SMT Specialist /Level 2: $36.00 - $45.00/hour SMT Specialist /Level 3: $40.00 - $50.00/hour

Redmond, WA30+ days ago

$34–$40 Per Hour

RESPONSIBILITIES: + Design, review, draft, procure, assemble, and test tooling and equipment + Identify and action continuous improvement opportunities for safety, build quality, efficiency, and cost + Triage non-conforming product and drive resolution and preventative actions + Resolve production issues while ensuring process integrity, product quality, and delivery timelines + Document work performed in organized matter + Ensure the successful transition of products from development to volume production BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2+ years of professional experience in a hands-on production environment or bachelor's degree in engineering or a similar field PREFERRED SKILLS AND EXPERIENCE: + Parametric 3D CAD design experience with Siemens NX or similar software + Experience interpreting and drafting engineering drawings with GD&T + Experience safely operating shop equipment such as drill presses, saws, sanders, and hand tools. + Hands-on experience programming and operating machine tools such as 3d printers, laser/waterjet cutters, and CNC mills; Or sound DFM knowledge around such processes + Exposure to PCBA processes and tooling + Ability to work in a fast paced, autonomously driven, and demanding atmosphere + Excellent communication skills, both written and verbal ADDITIONAL REQUIREMENTS: + Must be able to work all required shift hours, overtime, and weekends as needed.

Redmond, WA30+ days ago

$34–$40 Per Hour

NX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.

Redmond, WA30+ days ago

$22–$26.50 Per Hour

BASIC QUALIFICATIONS: + High school degree or equivalency certificate + 1+ years of hands on work experience PREFERRED SKILLS AND EXPERIENCE: + 2+ years of hands-on experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company + Ability to read, interpret, and work from layout drawings, mechanical drawings, assembly procedures, schematics, engineering drawings, and parts lists. + Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite + Excellent communication and organizational skills + Experience with electrical wiring + Experience setting up and running tests and experiments + Associate degree ADDITIONAL REQUIREMENTS: + Willing to work all shifts, overtime and weekends as needed.

New!

Renton, WA3 days ago

$22.25–$26.25 Per Hour

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Auburn, WA30+ days ago

$28–$45 Per Hour

ITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will provide leadership and technical support in the planning of numerical control programs to control contour path machining of metal parts using automatic machine tools.

Auburn, WA30+ days ago

$18–$32 Per Hour

n \nPREFERRED EDUCATION/EXPERIENCE\n\n High school diploma or equivalent and a minimum of four (4) years' experience with aerospace drawings, specifications, and assemblies or equivalent education/experience \n Aerospace sheet metal work experience \n \nITAR \u2013 US PERSON STATUS\n \nDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will independently identify assembly sequence and set up assembly equipment as specified on manufacturing work order, assemble materials, deliver finished material to other work areas, and complete detailed work order.\n

Auburn, WA30+ days ago

Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. In order to apply for the CBA position, participants must be contracted through WA Division of Vocational Rehabilitation (DVR) services and working with a contracted service provider from Skills Inc. and DVR.

New!

Auburn, WA5 days ago

$18–$25 Per Hour

Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will improve the efficiency of painters by ordering jobs in the most effective manner as well as by proper setup and preparation of aerospace parts and paperwork.

New!

Redmond, WA1 day ago

Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements.

Redmond, WA17 days ago

$26.44–$33.03 Per Hour

Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations **BENEFITS OF WORKING FOR HONEYWELL** In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flight.

Lynnwood, WA30+ days ago

$22.26–$27.45 Per Hour

Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high volume setting. Beyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions.

Lynnwood, WA30+ days ago

$32.30–$41.78 Per Hour

Preferred Qualifications:** + Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective repair and distribution of goods + Knowledge of practical application of engineering electronics, science, and technology including applying principles, techniques, procedures, and equipment to the design and production of various goods and services + Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming **Working Conditions:** + Working conditions are normal for a repair station environment + Repair operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE + May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes + May require occasional travel to support customer + Standing: 20% *percentage is approximate and may vary depending on work task + Sitting: 80% *percentage is approximate and may vary depending on work task + Lifting (in pounds): Up to 35 pounds + Pushing (in pounds): Up to 100 pounds + Mental/Visual: Use of Computer + Workspace: Work Bench **Top Benefits:** As a team member at Crane Aerospace and Electronics, you'll enjoy:? **Job Summary:** The R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics.

Marysville, WA17 days ago

Annual salary** USD 41,600 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner.

New!

Marysville, WA2 days ago

$57,620–$90,550 Per Year

Annual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).

Marysville, WA20 days ago

$35,640–$51,100 Per Year

Annual salary** USD $35,640.00 - $51,100.00 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-179781 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Sealant Operator 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Builds aircraft 787 structures carbon fiber parts using resins and epoxies using engineering drawings, company and customer specifications.

Marysville, WA30+ days ago

$35,640–$51,100 Per Year

Reference number** 2026-178170 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Press Operator 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Constructs aircraft interior parts such as bin doors and ceiling panels by assembling the parts cross section with materials and processing in a press with a match mold tool using engineering drawings, company and customer specifications. **Annual salary** USD 35,640.00 - 51,100.00 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes

Marysville, WA30+ days ago

$17.13–$24.57 Per Hour

Annual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 1st Shift Education job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

1st Shift Education Jobs in Greenwood, WA

Aerospace Chrome Assistant - 1st Shift Hytek Finishes

Aerospace Zinc Nickel Assistant - 1st Shift Hytek Finishes

Aerospace Cadmium Assistant - 1st Shift Hytek Finishes

Aerospace Drylube/10-85 Painter - 1st Shift Hytek Finishes

Aerospace Chrome Masker - 1st Shift Hytek Finishes

Aerospace Shot Peen Assistant - 1st Shift Hytek Finishes

Aerospace Anodize Operator - 1st Shift Hytek Finishes

Shipping Clerk and Back Up Driver - 1st Shift Hytek Finishes

Aerospace Paint Masker - 1st Shift Hytek Finishes

Aerospace Painter - 1st Shift Hytek Finishes

Aerospace Polish Operator - 1st or 2nd Shift Hytek Finishes

Aerospace Assembler II - 1st Shift Sekisui Aerospace

Advanced Composites Manufacturing Lead - 1st Shift Sekisui Aerospace

Aerospace Assembler I - 1st Shift Sekisui Aerospace

Kit Cutter I - Weekend 1st Shift Sekisui Aerospace

Aerospace Production - Kit Cutter I - 1st Shift Sekisui Aerospace

Aerospace Cadmium Assistant - 2nd Shift Hytek Finishes

Aerospace Paint Masker - 3rd Shift Hytek Finishes

Aerospace Abrasive Blast Operator - 3rd Shift Hytek Finishes

Aerospace Anodize Operator - 2nd Shift Hytek Finishes

Aerospace Cadmium Masker - 2nd Shift Hytek Finishes

Aerospace Painter - 3rd Shift Hytek Finishes

Aerospace Painter - 2nd Shift Hytek Finishes

Aerospace Titanium Cadmium Assistant - 2nd Shift Hytek Finishes

Aerospace Zinc Nickel Assistant - 3rd Shift Hytek Finishes

Aerospace Packager - 2nd Shift Hytek Finishes

Aerospace Titanium-Cadmium Assistant - 2nd Shift Hytek Finishes

Aerospace Cadmium Assistant - 3rd Shift Hytek Finishes

Freezer Clerk 1st Shift Level 1 - SCI Safran

CNC Machinist II - 1st Shift Cadrex

Production Machinist (Starlink) - 1st Shift SpaceX

Production Machinist (Starlink) - 1st Shift - Level 4/5 SpaceX

SMT Specialist - 1st Shift SpaceX

Mechanical Design Specialist, PCBA Production - 1st Shift (Starlink) SpaceX

Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceX

Production Technician - 1st Shift (Starlink) SpaceX

Aerospace Production - Kit Cutter I - Weekend 1st Shift Aim Aerospace

CNC Programmer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INC

Assembly Technician: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INC

CBA: 1st shift; Monday-Friday 7am-3:30pm SKILLS INC

Paint Scheduler: 1st shift; Monday-Friday 7am-3:30pm SKILLS INC

1st Shift Medical Device Assembler iMPact Business Group

Facilities Maintenance Technician Level 2 - 1st shift (6am-2:30pm) Honeywell Aerospace

Electronics Assembler- 1st & 2nd Shift (Soldering Required) (Open) Crane Aerospace & Electronics

Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & Electronics

Lay Up & Press Operator - 1st Shift - $20/hr - SCM MV Safran

Production Supervisor - 1st Shift - SCM MV Safran

Sealant Operator 1st Shift - SCI Safran

Press Operator 1st Shift - SCI Safran

Kit Cut 1st Shift - SCI Safran

Resume Resources