Aerospace Chrome Masker - 1st Shift Hytek FinishesAerospace Chrome Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Chrome Assistant - 1st Shift Hytek FinishesAerospace Chrome Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Drylube/10-85 Painter - 1st Shift Hytek FinishesAerospace Drylube/10-85 Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Zinc Nickel Assistant - 1st Shift Hytek FinishesAerospace Zinc Nickel Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Cadmium Assistant - 1st Shift Hytek FinishesAerospace Cadmium Assistant - 1st ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Shot Peen Assistant - 1st Shift Hytek FinishesAerospace Shot Peen Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Production Associate 1st Shift Cornerstone Building Brands, Inc.Production Associate 1st ShiftAuburn, WAFull timeIf you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.
Aerospace Paint Masker - 1st Shift Hytek FinishesAerospace Paint Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Aerospace Anodize Operator - 1st Shift Hytek FinishesAerospace Anodize Operator - 1st ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Shipping Clerk and Back Up Driver - 1st Shift Hytek FinishesShipping Clerk and Back Up Driver - 1st ShiftWoodmont Beach, WAFull timeThis position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in the facility. Prioritizes and processes orders from certification department; verifies documentation is complete and places orders in the proper area for shipping via Hytek truck or common carrier.
Aerospace Painter - 1st Shift Hytek FinishesAerospace Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Laminator II - 1st Shift Sekisui AerospaceLaminator II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Laminator I- 1st Shift Sekisui AerospaceLaminator I- 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Trimmer I, 1st Shift Sekisui AerospaceTrimmer I, 1st ShiftBonney Lake, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:
Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.
Assembler I, 1st Shift Sekisui AerospaceAssembler I, 1st ShiftBonney Lake, WA$22.25–$26.25 / hourFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to takt time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Material Handler - 1st Shift Parker Hannifin CorporationMaterial Handler - 1st ShiftCrystal Mountain, WA$22.45–$27.25 / hourFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.
Packer - 1st Shift Utz BrandsPacker - 1st ShiftAlgona, WAFull timeDuring the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of UTZ Quality Foods is looking to grow our loyal, career driven, and customer focused team, and are currently recruiting for a Packer to work 1st Shift for our manufacturing facility in Algona, WA.
Senior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WA Providence St. Joseph HealthSenior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WASeattle, WARemoteFull timeIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.
Senior Claims Counsel - Title Insurance (Remote) First American Title Insurance CompanySenior Claims Counsel - Title Insurance (Remote)Seattle, WARemote$129,300–$172,300 / yearFull timeThe Senior Claims Counsel position with First American Title Insurance Company provides an excellent opportunity for counsel to engage in complex legal analysis, craft creative solutions to difficult problems, manage their own caseload, oversee outside litigation counsel, and engage in high-level problem solving, negotiation and legal analysis in a stimulating and collegial environment with an opportunity for long-term growth and advancement. First American reasonably believes that a criminal history may have a direct, adverse and negative relationship with the following material job duties for this position potentially resulting in the withdrawal of the conditional offer of employment: handling of confidential, proprietary or trade secret information belonging to First American or its customers, administrating or facilitating financial transactions, and the ability to meet customer-imposed criminal history requirements.
Aerospace Painter - 3rd Shift Hytek FinishesAerospace Painter - 3rd ShiftKent, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Anodize Operator - 2nd Shift Hytek FinishesAerospace Anodize Operator - 2nd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Paint Masker - 3rd Shift Hytek FinishesAerospace Paint Masker - 3rd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Aerospace Painter - 2nd Shift Hytek FinishesAerospace Painter - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Cadmium Masker - 2nd Shift Hytek FinishesAerospace Cadmium Masker - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Abrasive Blast Operator - 3rd Shift Hytek FinishesAerospace Abrasive Blast Operator - 3rd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Lead Loading, Shipping, and Receiving Associate 1st Shift Cornerstone Building Brands IncLead Loading, Shipping, and Receiving Associate 1st ShiftAuburn, WA$25.50–$28.50 / hourCornerstone Building Brands' broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Monitor line staffing, and recommend plans to adjust staffing levels daily, to achieve established goals for each line of responsibility to ensure production levels are met while controlling manpower costs.
Aerospace NDT Assistant - 1st Shift Hytek FinishesAerospace NDT Assistant - 1st ShiftKent, WA$21–$24 / hourEmployees in this position will learn how to perform tasks in support of the Level 1 and Level II Non-Destructive Testing Inspector(s) including loading, running, and unloading the ovens for stress bakes and vapor degreasing. * FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
NewAerospace Titanium Assistant - 1st Shift Hytek FinishesAerospace Titanium Assistant - 1st ShiftKent, WA$21–$25 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour
Production Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour
CNC Programmer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCCNC Programmer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$28–$45 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will provide leadership and technical support in the planning of numerical control programs to control contour path machining of metal parts using automatic machine tools.
CNC Machinist: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCCNC Machinist: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$38 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
Quality Engineer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCQuality Engineer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$33–$43 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will review aerospace and commercial documents/parts that are fabricated and processed by Skills Inc. for compliance to engineering specifications, AS9100, NADCAP, and company quality system requirements.
Penetrant Trainee: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCPenetrant Trainee: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$25 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will prepare and process aerospace and commercial parts and materials using the water wash method of fluorescent dye penetrant.
Forklift Driver: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCForklift Driver: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$22–$25 / hourThe ideal candidate will be responsible for operating forklifts and other material handling equipment to transport, stack, load, and unload raw materials, finished products, and supplies within a manufacturing/finish facility, ensuring operational efficiency and safety. Material Handling: Safely operate forklifts (sit-down, stand-up, reach trucks) to move, load, unload, and stack pallets and bulk items.
Vocational Programs Coordinator: 1st Shift; Mon-Fri 7am-3:30pm SKILLS INCVocational Programs Coordinator: 1st Shift; Mon-Fri 7am-3:30pmAuburn, WA$25–$30 / hourThe ideal candidate will implement, facilitate, and oversee onsite and offsite program activities for the Aerospace Internship Program (AIP) and DSHS DVR Pre-Employment Transition Services (Pre-ETS). Basic knowledge and familiarity in the following training topics; life skills, soft skills, self-advocacy, general workplace safety and hygiene, personal etiquette and workplace communication.
Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceXIntegration & Test Specialist (Starlink Propulsion) - 1st ShiftRedmond, WA$34–$40 / hourNX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.
Warehouse Associate - 1st Shift SchyllingWarehouse Associate - 1st ShiftLakewood, Washington$18.50–$19.50We offer iconic brands such as NeeDoh®, LAVA® Lamp, Big Wheel®, Schylling hand puppets, Sea-Monkeys® and a variety of other toys that satisfy curiosity, encourage discovery, and help people find their best mellow and chill. Perform value-added services activities included, but not limited to, unboxing/boxing, labeling, stickering, packaging, assembly of products to meet fulfillment requirements.
Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Assembly Technician: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCAssembly Technician: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$32 / hourn \nPREFERRED EDUCATION/EXPERIENCE\n\n High school diploma or equivalent and a minimum of four (4) years' experience with aerospace drawings, specifications, and assemblies or equivalent education/experience \n Aerospace sheet metal work experience \n \nITAR \u2013 US PERSON STATUS\n \nDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will independently identify assembly sequence and set up assembly equipment as specified on manufacturing work order, assemble materials, deliver finished material to other work areas, and complete detailed work order.\n
Manufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pm SKILLS INCManufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pmAuburn, WA$18–$21 / hourThe incumbent will identify, prioritize, and pull materials identified on manufacturing work orders; set up or assist in setting up machinery to proper dimensions specified on manufacturing work orders; ensure finished material is delivered to other work areas; and ensure work orders are filled out accurately. Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military-related technologies may only be accessed, viewed, or shared by US Persons as defined by law.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Paint Scheduler: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCPaint Scheduler: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$25 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will improve the efficiency of painters by ordering jobs in the most effective manner as well as by proper setup and preparation of aerospace parts and paperwork.