NewIT Help Desk Support MV TransportationIT Help Desk SupportKent, WAResponsibilities : Responsible for providing Trapeze software direction, desktop, server and network support for client operations according to Service Level Agreements (SLA). Responsible for supporting local technologies related to transit operations, such as; Mobile Data Terminals (MDT)/in vehicle tablets, and Trapeze reservation software platform.
Aerospace Drylube/10-85 Painter - 1st Shift Hytek FinishesAerospace Drylube/10-85 Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Shot Peen Assistant - 1st Shift Hytek FinishesAerospace Shot Peen Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Chrome Assistant - 1st Shift Hytek FinishesAerospace Chrome Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Zinc Nickel Assistant - 1st Shift Hytek FinishesAerospace Zinc Nickel Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Chrome Masker - 1st Shift Hytek FinishesAerospace Chrome Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Cadmium Assistant - 1st Shift Hytek FinishesAerospace Cadmium Assistant - 1st ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Painter - 1st Shift Hytek FinishesAerospace Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Anodize Operator - 1st Shift Hytek FinishesAerospace Anodize Operator - 1st ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Paint Masker - 1st Shift Hytek FinishesAerospace Paint Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:
Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Packer - 1st Shift Utz BrandsPacker - 1st ShiftAlgona, WAFull timeDuring the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of UTZ Quality Foods is looking to grow our loyal, career driven, and customer focused team, and are currently recruiting for a Packer to work 1st shift for our manufacturing facility in Algona, WA.
Lineperson-1st Shift Utz BrandsLineperson-1st ShiftAlgona, WAFull timeDuring the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of Utz Quality Foods is looking to grow our loyal, career driven, and customer focused team, and is currently recruiting for a Lineperson to work from our manufacturing facility located in Algona, WA on 1st Shift.
IT Manager Revel StaffingIT ManagerSeattle, WashingtonThis role is responsible for managing the IT help desk, maintaining systems and documentation, supporting users across departments, and improving service delivery through automation and AI-enabled tools. A healthcare organization is seeking a full-time IT Manager to oversee day-to-day IT operations, support services, systems maintenance, infrastructure performance, and end-user technology support.
Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.
Order Puller, 1st Shift Masco CorpOrder Puller, 1st ShiftAlgona, WAE-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. The Santa Ana, Calif.-based company and maker of the BEHR, KILZ, WHIZZ and E&J brands is dedicated to meeting the project needs of DIYers, professionals, architects and designers with an unwavering commitment to quality, innovation and value.
Forklift Material Handler (1st Shift | Full Time) Cascade Coffee, Inc.Forklift Material Handler (1st Shift | Full Time)Everett, WA$21.50–$22.50 / hourThis position requires work in a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust strong odors. Operate reach lifts and sit-down/stand-up forklifts to place pallets in assigned racking locations.
Aerospace NDT Assistant - 1st Shift Hytek FinishesAerospace NDT Assistant - 1st ShiftKent, WA$21–$24 / hourEmployees in this position will learn how to perform tasks in support of the Level 1 and Level II Non-Destructive Testing Inspector(s) including loading, running, and unloading the ovens for stress bakes and vapor degreasing. * FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
NewAerospace Titanium Assistant - 1st Shift Hytek FinishesAerospace Titanium Assistant - 1st ShiftKent, WA$21–$25 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
CNC Programmer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCCNC Programmer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$28–$45 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will provide leadership and technical support in the planning of numerical control programs to control contour path machining of metal parts using automatic machine tools.
Penetrant Trainee: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCPenetrant Trainee: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$25 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will prepare and process aerospace and commercial parts and materials using the water wash method of fluorescent dye penetrant.
Quality Engineer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCQuality Engineer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$33–$43 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will review aerospace and commercial documents/parts that are fabricated and processed by Skills Inc. for compliance to engineering specifications, AS9100, NADCAP, and company quality system requirements.
Manufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pm SKILLS INCManufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pmAuburn, WA$18–$21 / hourThe incumbent will identify, prioritize, and pull materials identified on manufacturing work orders; set up or assist in setting up machinery to proper dimensions specified on manufacturing work orders; ensure finished material is delivered to other work areas; and ensure work orders are filled out accurately. Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military-related technologies may only be accessed, viewed, or shared by US Persons as defined by law.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WashingtonThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
CNC Machinist: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCCNC Machinist: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$38 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
Vocational Programs Coordinator: 1st Shift; Mon-Fri 7am-3:30pm SKILLS INCVocational Programs Coordinator: 1st Shift; Mon-Fri 7am-3:30pmAuburn, WA$25–$30 / hourThe ideal candidate will implement, facilitate, and oversee onsite and offsite program activities for the Aerospace Internship Program (AIP) and DSHS DVR Pre-Employment Transition Services (Pre-ETS). Basic knowledge and familiarity in the following training topics; life skills, soft skills, self-advocacy, general workplace safety and hygiene, personal etiquette and workplace communication.
Materials Specialist: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCMaterials Specialist: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$20–$28 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. • Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
Print Shop Technician - 1st Shift - $20-hr - SCM MV Safran SAPrint Shop Technician - 1st Shift - $20-hr - SCM MVMarysville, WACompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD 41,600 ITAR: ITAR Controlled position. We trust our employees to bring bold ideas to build the future of aerospace together, contributing to our ranking by TIME as the leading Aerospace & Defense company on the 2023 Worlds Best Companies list (#59 on the full list).
Paint Scheduler: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCPaint Scheduler: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$25 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will improve the efficiency of painters by ordering jobs in the most effective manner as well as by proper setup and preparation of aerospace parts and paperwork.
HR Specialist 1st Shift M-F 7:00am-3:30pm SKILLS INCHR Specialist 1st Shift M-F 7:00am-3:30pmAuburn, WA$20–$27 / hourITAR - US PERSON STATUS Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD 17.13/hr - 24.57/hr ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Structures Mechanic 1st Shift Safran SAStructures Mechanic 1st ShiftMarysville, WA$20.79–$32.68 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Temporary Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: More than 3 years Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD $20.79 - $32.68 ITAR: ITAR Controlled position. Assembles aircraft parts using resins and epoxies and fasteners using engineering drawings, company and customer specifications.
Assembly Technician: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCAssembly Technician: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$32 / hourn \nPREFERRED EDUCATION/EXPERIENCE\n\n High school diploma or equivalent and a minimum of four (4) years' experience with aerospace drawings, specifications, and assemblies or equivalent education/experience \n Aerospace sheet metal work experience \n \nITAR \u2013 US PERSON STATUS\n \nDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will independently identify assembly sequence and set up assembly equipment as specified on manufacturing work order, assemble materials, deliver finished material to other work areas, and complete detailed work order.\n
Forklift Driver: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCForklift Driver: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$22–$25 / hourThe ideal candidate will be responsible for operating forklifts and other material handling equipment to transport, stack, load, and unload raw materials, finished products, and supplies within a manufacturing/finish facility, ensuring operational efficiency and safety. Material Handling: Safely operate forklifts (sit-down, stand-up, reach trucks) to move, load, unload, and stack pallets and bulk items.
Order Puller, 1st Shift Behr Process CorporationOrder Puller, 1st ShiftAlgona, WAE-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. The Santa Ana, Calif.-based company and maker of the BEHR, KILZ, WHIZZ and E&J brands is dedicated to meeting the project needs of DIYers, professionals, architects and designers with an unwavering commitment to quality, innovation and value.
NewShipping and Receiving Clerk - 1st Shift Taylor CorpShipping and Receiving Clerk - 1st ShiftKent, WAThe actual base offered depends on a variety of factors, which may include as applicable, the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. One of the largest print and communications firms in North America, Taylor's family of companies provides a diverse set of products, services and technologies that address the toughest business challenges.
Tool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: $17.13 - $24.57 Hourly ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Lay Up 1st Shift - SCI Safran SALay Up 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD 17.13/hr - 24.57/hr ITAR: ITAR Controlled position. Constructs complicated aircraft structure parts by laying-up resin infused carbon fiber in a sequence and process in an autoclave as described on engineering drawings and company specifications.
Mix Operator - 1st shift Conagra Brands IncMix Operator - 1st shiftKent, WAReporting to the Production Team Leader, you will support manufacturing operations by operating and monitoring mixing equipment to ensure product is produced safely, accurately, and on schedule at the Kent, Washington facility. This role involves a physically demanding production environment, including repetitive handling and lifting of 50‑pound ingredient bags approximately every 15 to 30 minutes as part of normal operations.
NewSanitation Technician 1st Shift Conagra Brands IncSanitation Technician 1st ShiftKent, WAReporting to the Sanitation Team Leader, you will support sanitation operations across the facility with a primary focus on maintaining clean, safe, and food‑ready equipment and environments. Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet.
Machine Operator (Production Cook) - 1st shift Conagra Brands IncMachine Operator (Production Cook) - 1st shiftKent, WAOur focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Depending on the role, physical and environmental requirements can differ but include: Being on your feet, walking around the facility, climbing stairs/ladders or kneeling for extended periods of time.
Shipping and Receiving Clerk - 1st Shift Taylor CommunicationsShipping and Receiving Clerk - 1st ShiftKent, WashingtonThe actual base offered depends on a variety of factors, which may include as applicable, the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. One of the largest print and communications firms in North America, Taylor’s family of companies provides a diverse set of products, services and technologies that address the toughest business challenges.
Warehouse Technician- 1st Shift Champion Petfoods EuropeWarehouse Technician- 1st ShiftAuburn, WashingtonThe base pay range for this position at commencement of employment is expected to be between the range listed above, however, base pay offered may vary depending on multiple individualized factors, including but not limited to, market location, job-related knowledge, skills, and experience. The Warehouse Technician has primary responsibility to ensure the safe and efficient movement of all Champion Petfoods’ finished product within the Warehouse at state-of-the-art pet food production facility located in Auburn, Kentucky.
Structures Mechanic Ceilings 1st Shift - SCI SafranStructures Mechanic Ceilings 1st Shift - SCIMarysville, WA$20.79–$32.68 / hourAnnual salary** USD $20.79 - $32.68 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182625 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Structures Mechanic Ceilings 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Assembles aircraft parts using resins and epoxies and fasteners using engineering drawings, company and customer specifications.
Tool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.
Cascade Layup (Kit Inspect) 1st shift - SCI SafranCascade Layup (Kit Inspect) 1st shift - SCIMarysville, WA$35,760–$56,190 / yearFinalizes the layup build of the Cascade by: Organizing mandrels into rows in sequential order per XRMY 13-530 and MSC636-1 Properly compacts rows per XRMY 13-530 and MSC636-1 Ensures strong backs are at correct height per XRMY 13-530 and MSC636-1 Performs raw material layup on the surface of strong backs and tool surface per XRMY 13-530 and MSC636-1 Performs inspection of the cascade build per XRMY 13-530 and MSC636-1 Closes the lid of the cascade component Uses the overhead crane to put the lid onto its corresponding LM Ensures that the lid is seated correctly per XRMY 13-530 and MSC636-1 Measures the gap between details of LM per XRMY 13-530 and MSC636-1 Safely handles various regulated materials used in the process. **Annual salary** USD 35,760 - 56,190 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
Kit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.