Aerospace Chrome Masker - 1st Shift Hytek FinishesAerospace Chrome Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Shot Peen Assistant - 1st Shift Hytek FinishesAerospace Shot Peen Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Drylube/10-85 Painter - 1st Shift Hytek FinishesAerospace Drylube/10-85 Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Painter - 1st Shift Hytek FinishesAerospace Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Paint Masker - 1st Shift Hytek FinishesAerospace Paint Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Aerospace Polish Operator - 1st or 2nd Shift Hytek FinishesAerospace Polish Operator - 1st or 2nd ShiftWoodmont Beach, WAFull timel learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Painter - 3rd Shift Hytek FinishesAerospace Painter - 3rd ShiftKent, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Painter - 2nd Shift Hytek FinishesAerospace Painter - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Titanium-Cadmium Assistant - 2nd Shift Hytek FinishesAerospace Titanium-Cadmium Assistant - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Cadmium Assistant - 3rd Shift Hytek FinishesAerospace Cadmium Assistant - 3rd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Zinc Nickel Assistant - 3rd Shift Hytek FinishesAerospace Zinc Nickel Assistant - 3rd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
CNC Machinist-Day Shift Primus International LLCCNC Machinist-Day ShiftTukwila, WAFull timeAt the highest level, they are capable of setting up and running all site-specific CNC and conventional machines, designing and manufacturing complex tooling, and mentoring junior machinists while contributing to continuous improvement initiatives. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.
Aerospace NDT Assistant - 1st Shift Hytek FinishesAerospace NDT Assistant - 1st ShiftKent, WA$21–$24 / hourEmployees in this position will learn how to perform tasks in support of the Level 1 and Level II Non-Destructive Testing Inspector(s) including loading, running, and unloading the ovens for stress bakes and vapor degreasing. * FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
NewAerospace Titanium Assistant - 1st Shift Hytek FinishesAerospace Titanium Assistant - 1st ShiftKent, WA$21–$25 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Order Puller, 1st Shift Masco CorpOrder Puller, 1st ShiftAlgona, WAE-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. The Santa Ana, Calif.-based company and maker of the BEHR, KILZ, WHIZZ and E&J brands is dedicated to meeting the project needs of DIYers, professionals, architects and designers with an unwavering commitment to quality, innovation and value.
Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Assembly Technician: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCAssembly Technician: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$32 / hourn \nPREFERRED EDUCATION/EXPERIENCE\n\n High school diploma or equivalent and a minimum of four (4) years' experience with aerospace drawings, specifications, and assemblies or equivalent education/experience \n Aerospace sheet metal work experience \n \nITAR \u2013 US PERSON STATUS\n \nDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will independently identify assembly sequence and set up assembly equipment as specified on manufacturing work order, assemble materials, deliver finished material to other work areas, and complete detailed work order.\n
CNC Programmer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCCNC Programmer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$28–$45 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will provide leadership and technical support in the planning of numerical control programs to control contour path machining of metal parts using automatic machine tools.
Manufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pm SKILLS INCManufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pmAuburn, WA$18–$21 / hourThe incumbent will identify, prioritize, and pull materials identified on manufacturing work orders; set up or assist in setting up machinery to proper dimensions specified on manufacturing work orders; ensure finished material is delivered to other work areas; and ensure work orders are filled out accurately. Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military-related technologies may only be accessed, viewed, or shared by US Persons as defined by law.
CNC Machinist: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCCNC Machinist: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$38 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
Quality Engineer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCQuality Engineer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$33–$43 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will review aerospace and commercial documents/parts that are fabricated and processed by Skills Inc. for compliance to engineering specifications, AS9100, NADCAP, and company quality system requirements.
Penetrant Trainee: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCPenetrant Trainee: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$25 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will prepare and process aerospace and commercial parts and materials using the water wash method of fluorescent dye penetrant.
Paint Scheduler: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCPaint Scheduler: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$25 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The ideal candidate will improve the efficiency of painters by ordering jobs in the most effective manner as well as by proper setup and preparation of aerospace parts and paperwork.
HR Specialist 1st Shift M-F 7:00am-3:30pm SKILLS INCHR Specialist 1st Shift M-F 7:00am-3:30pmAuburn, WA$20–$27 / hourITAR - US PERSON STATUS Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Materials Specialist: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCMaterials Specialist: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$20–$28 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. • Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
NewOrder Puller, 1st Shift Behr Process CorporationOrder Puller, 1st ShiftWAE-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. The Santa Ana, Calif.-based company and maker of the BEHR, KILZ, WHIZZ and E&J brands is dedicated to meeting the project needs of DIYers, professionals, architects and designers with an unwavering commitment to quality, innovation and value.
NewAerospace Paint 10/85 Dri-Lube Masker - 1st Shift Hytek FinishesAerospace Paint 10/85 Dri-Lube Masker - 1st ShiftKent, WA$18.50–$23 / hourFollow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators. Key Responsibilities Work closely with experienced Maskers, Painters, and Department Leads and Coordinators to complete work and prioritize tasks.
Forklift Driver: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCForklift Driver: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$22–$25 / hourThe ideal candidate will be responsible for operating forklifts and other material handling equipment to transport, stack, load, and unload raw materials, finished products, and supplies within a manufacturing/finish facility, ensuring operational efficiency and safety. Material Handling: Safely operate forklifts (sit-down, stand-up, reach trucks) to move, load, unload, and stack pallets and bulk items.
Vocational Programs Coordinator: 1st Shift; Mon-Fri 7am-3:30pm SKILLS INCVocational Programs Coordinator: 1st Shift; Mon-Fri 7am-3:30pmAuburn, WA$25–$30 / hourThe ideal candidate will implement, facilitate, and oversee onsite and offsite program activities for the Aerospace Internship Program (AIP) and DSHS DVR Pre-Employment Transition Services (Pre-ETS). Basic knowledge and familiarity in the following training topics; life skills, soft skills, self-advocacy, general workplace safety and hygiene, personal etiquette and workplace communication.
Integration Technician Starlink - 1st Shift Space Exploration Technologies CorpIntegration Technician Starlink - 1st ShiftRedmond, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Manufacturing Engineer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCManufacturing Engineer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$27–$42 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Solution orientated, able to define problems, collect data, establish facts and draw valid conclusions to solve a wide range of difficult problems in practice and cost effective ways.
Skillbridge - Avionics Electronics Technician - 1st Shift (Onsite) RTX CorporationSkillbridge - Avionics Electronics Technician - 1st Shift (Onsite)federal way, WA_Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings._ **WHAT WE OFFER:** SkillBridge Fellows are not eligible for any employee benefits, however they may be available upon conversion to full-time.? https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.62 **Security Clearance Type:** None/Not Required **Security Clearance Status:** Not Required **Are you seeking a pathway to an incredible post-military career in the Aerospace and Defense industry?** ?
NewMaterial Handler 1st Shift Ryder System IncMaterial Handler 1st ShiftAuburn, WAImportant Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)Able to work within a diverse work environment.
Material Handler 1st Shift RyderMaterial Handler 1st ShiftAUBURN, WashingtonImportant Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)Able to work within a diverse work environment.
NewWarehouse Material Handler 1st Shift RyderWarehouse Material Handler 1st ShiftKENT, WAImportant Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. At Ryder, you will be part of a team-first culture built on respect when joining a community of proud women and men in Supply Chain, including many Military Reservists and Veterans.
Avionics Electronics Technician - 1st Shift (Onsite) RTX CorpAvionics Electronics Technician - 1st Shift (Onsite)Federal Way, WARegardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Aligns and adjusts advanced electronic components on units being repaired to ensure proper functioning of electronic circuits, utilizing established calibration procedures.
WDVA Registered Nurse 2, Full-Time Swing Shift, Washington Veterans Home State of WashingtonWDVA Registered Nurse 2, Full-Time Swing Shift, Washington Veterans HomePort Orchard, WA$89,400–$144,804 / yearEmployees who are assigned to a facility that provides direct care to residents, patients, and/or clients and whose duties are required to be performed on location will receive an additional one dollar ($1.00) per hour of supplemental basic shift premium for each hour of basic shift premium. Full-time employees who work full monthly schedules qualify for holiday compensation if they are employed before the holiday and are in pay status for at least 80 nonovertime hours during the month of the holiday; or for the entire work shift preceding the holiday.
NewAerospace Abrasive Blast Operator - 3rd Shift Hytek FinishesAerospace Abrasive Blast Operator - 3rd ShiftKent, WA$22.10–$41.10 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
NewCustodian Swing Shift 2025-26 Bellevue School DistrictCustodian Swing Shift 2025-26Bellevue, WASweeps, mops and scrubs floors; clean and maintains equipment; empties and clean pencil sharpeners, trash and recycle bins; cleans and maintains furniture and fixtures, washes windows, vacuums carpets, curtains, blinds and furniture; shampoos carpets; Cleans and disinfects restrooms, keeps them supplied with paper towels, and soap; Cleans assigned offices/classrooms; Moves furniture and equipment; arranges tables and chairs for special events; Collects and disposes of garbage and recycle; shovels snow, sweeps and washes walks, keeps grounds clean, Performs minor maintenance on site equipment and/or report issues, repairs such as unstopping sinks, replacing burned out light bulbs and tubes. Secures building by walking exterior of building to make sure it is secure, locking doors, closing windows, turning off lights, exhaust fans and other equipment and setting alarms; Assists staff and community groups; Performs other related work as required by the conditions of the facility or as requested by the building administrator and/or custodial manager/supervisor or head day custodian.
Manufacturing Engineer Sr (Multiple Shifts) - Lunar Blue Origin Enterprises LPManufacturing Engineer Sr (Multiple Shifts) - LunarWA$91,852–$128,592.45 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer III (Multiple Shifts) - Lunar Blue Origin Enterprises LPManufacturing Engineer III (Multiple Shifts) - LunarWA$91,852–$128,592.45 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer II (Multiple Shifts) - Lunar Blue Origin Enterprises LPManufacturing Engineer II (Multiple Shifts) - LunarWA$91,852–$128,592.45 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.