Manufacturing Engineer IV Benchmark Electronics IncManufacturing Engineer IVSanta Ana, CA$113,934–$142,418 / yearDevelop new techniques as a result of independent research study; development and evaluation of plans and procedures; theoretical computations and analysis; design and development of equipment with complex features; testing of procedures, equipment, materials; makes extensive contributions to proposal efforts; responsibility for the conduct and performance of assignments. When you join us, you become part of a team passionate about making a meaningful impact across various sectors, including commercial aerospace, defense, advanced computing, next-generation communications, complex industrials, medical, and semiconductor capital equipment.
Lead RF Manufacturing Engineer Impulse Space Propulsion Inc.Lead RF Manufacturing EngineerRedondo Beach, CA$140,000–$180,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Experience with automated test environments using Python or similar tools, including ability to understand existing test automation, troubleshoot failures, and make targeted changes is strongly desired.
Manufacturing Technician (IGIV Filling) Grifols SAManufacturing Technician (IGIV Filling)Los Angeles, CA$21.50–$22 / hourResponsible for performing the following daily tasks: cleaning/ sanitizing aseptic and non-aseptic processing areas, preparing and sterilizing filling and freeze-drying components (such as vials, stoppers, and filling assemblies), and performing aseptic fills. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Supplier Development Engineer, Manufacturing Starship Space Exploration Technologies CorpSupplier Development Engineer, Manufacturing StarshipHawthorne, CA$100,000–$117,500 / yearOwn the new product introduction of new parts and assemblies on the rocket, including determining the ideal manufacturing method, identifying and reviewing suppliers, and developing a reliable process for ramping to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Opto-Mechanical Manufacturing Engineer Impulse Space Propulsion Inc.Opto-Mechanical Manufacturing EngineerRedondo Beach, CA$100,000–$200,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Collaborate with optical design engineers to ensure manufacturability, DFM/DFA of optical assemblies, including custom spherical and aspherical lenses/mirrors.
Supplier Development Engineer, Manufacturing Falcon & Dragon Space Exploration Technologies CorpSupplier Development Engineer, Manufacturing Falcon & DragonHawthorne, CA$100,000–$117,500 / yearOwn the new product introduction of new parts and assemblies on the rocket, including determining the ideal manufacturing method, identifying and reviewing suppliers, and developing a reliable process for ramping to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Supplier Support Manufacturing Engineer Gilat Satellite Networks LtdSupplier Support Manufacturing EngineerLos Angeles, CA$90,000–$105,000 / yearWe are looking for a Supplier Support Manufacturing Engineer, a strong technical contributor who can partner effectively with suppliers, ensuring they fully understand product requirements and engineering changes. They work closely with internal design and manufacturing teams, providing DFM guidance and assessing supplier capabilities to ensure alignment with production and product performance goals.
Manufacturing Estimator IMS Global Gear Machining LLCManufacturing EstimatorHuntington Beach, CAAnalyzes blueprints, specifications, proposals, and other documentation to prepare a method of manufacturing framework that includes raw material costs, setup/production times & costs (labor and burden), sub-contract operation costs etc. for products & services to build quotations to be submitted to customers. Establish cost estimates to include labor (direct and indirect), materials, subcontractor costs, tooling, finishing, assembly, and packaging.
**SECRET CLEARANCE** Manufacturing Engineer Level 5 Apollo Professional Solutions Inc**SECRET CLEARANCE** Manufacturing Engineer Level 5Los Angeles, CAThis role plays a key part in optimizing manufacturing operations, driving continuous improvement initiatives, and ensuring high-performance outcomes across mechanical systems. Use engineering software tools (Creo CAD, Windchill PLM, Oracle MRP/MES, MS Office) to track: Design updates.
Mgr Manufacturing IT Infrastructure Ventura Foods LLCMgr Manufacturing IT InfrastructureIrvine, CA$140,057–$184,559.55 / yearYour primary mission is modernization: working alongside Plant Engineering to transform "brownfield" plants into modern, connected facilities, ensuring data flows securely from the production line to the cloud (AWS). Ventura Foods reserves the right to pay outside of the given range based on a variety of factors including but not limited to: candidate skills and experience, complexity of the job, budgetary factors, and location/geography.
1st Shift - Assembler TeamQuest Staffing Services1st Shift - AssemblerSanta Ana, CAThe ideal candidate has strong mechanical aptitude, enjoys hands-on work, and maintains high attention to detail in a fast-paced manufacturing environment. p]:pt-0 [&>p]:mb-2 [&>p]:my-0"> Fit, align, and adjust all components (including bearings and seals) to close tolerances; document clearances for engineering review.
Quality Inspector - 1st Shift Karman Holdings IncQuality Inspector - 1st ShiftHuntington Beach, CAOur tip-to-tail capabilities include payload protection and deployment systems, propulsion systems, aerodynamic interstage systems, separation systems, missile subsystems, shroud systems, launch systems, and payload integration solutions. Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies' core mission priorities, and meet the accelerating demand for access to space.
Material Handler I-1st shift TriMas CorpMaterial Handler I-1st shiftCA$19–$29.86 / hourBenefit offerings include Medical Insurance and Prescription Drugs, Dental Insurance, Vision Insurance, Flexible Spending Accounts, Life Insurance, Short-Term Disability, Long-Term Disability Insurance (for eligible employees), Employee Assistance Plan (EAP), Paid Time Off (may include vacation and sick time), Retirement Program, and Other Voluntary Benefits. Essential Duties and Responsibilities: Responsible for physically receiving raw material, pulling wire samples, and providing documentation to receiving clerk in order to create a purchase order receiver (POR) per QSI 10.01 section 5.0.
Manufacturing Engineer Electronic Theatre Controls, Inc.Manufacturing EngineerBurbank, CAAnalyze and redesign products for improvements using design of experiments (DOE), finite element analysis (FEA), Failure Mode Effects Analysis (FMEA) or other engineering tools. Youll help bring new products from design to production, improve existing processes, and develop practical solutions that improve quality, efficiency, and cost.
NewNew Graduate Engineer, Manufacturing Starshield Space Exploration Technologies CorpNew Graduate Engineer, Manufacturing StarshieldHawthorne, CA$100,000–$130,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Combining these skills, these engineers face challenges across a wide variety of work centers at the company, and the team is frequently asked to tackle new, inter-departmental development projects.
Manufacturing Specialist Starshield Space Exploration Technologies CorpManufacturing Specialist StarshieldHawthorne, CA$33–$39 / hourManufacturing Specialists will be expected to contribute in daily production activities including dispositioning and troubleshooting issues, assembling first-article flight and GSE hardware, working with engineers to execute sub-system development testing, and aiding production technicians. BASIC QUALIFICATIONS: Associate''s degree or higher in an electronics, mathematical, or engineering discipline OR high school diploma and 5+ years of professional experience in testing, developing, and/or manufacturing electro-mechanical systems or harnessing in lieu of a degree.
Propulsion Engineer, Avionics Manufacturing Raptor Space Exploration Technologies CorpPropulsion Engineer, Avionics Manufacturing RaptorHawthorne, CA$100,000–$117,500 / yearAs propulsion engineer on the Raptor avionics manufacturing team, you will be working to development, qualification, automation various manufacturing and test processes as well as scale up our in-house production capability across a wide range of avionics hardware including PCBAs, sensors, harnessing, and more. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Chemical Lab Operator - 2nd Shift Pioneer Circuits Inc.Chemical Lab Operator - 2nd ShiftSanta Ana, CA$18–$20 / hourAs the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. California Pay Range $18—$20 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations.
Machinist 1st Shift ToyotaMachinist 1st ShiftCosta Mesa, CaliforniaFor any non-conforming issues, validate part setup, tool builds, fixture requirements and machine geometry and coordinate data with QC and Manufacture Engineering to achieve the required resolution and expected quality. 5+ years’ experience working in a highly dynamic, metric driven, close tolerance CNC manufacturing environment, with responsibilities in machine operation, programming, and cutting tool selection and maintenance.
Propulsion Engineer, Components Manufacturing Raptor Space Exploration Technologies CorpPropulsion Engineer, Components Manufacturing RaptorHawthorne, CA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Our engineers are hardware experts for flow control devices that enable the Raptor engine, integrating pneumatics, mechanical, electrical, and software into integrated packages that enable streamlined manufacturing and engine operation.