Quality Inspector (Starlink Aviation) - 2Nd Shift Space Exploration TechnologiesQuality Inspector (Starlink Aviation) - 2Nd ShiftWoodinville, WA$27–$33 / hourYou may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. RESPONSIBILITIES: Provide detailed in-process and final inspections on electrical and mechanical assemblies, using detailed drawings, CAD models, and established processes to verify conformance to design requirements.
Industrial Maintenance Technician (Starlink) - 2nd Shift SpaceXIndustrial Maintenance Technician (Starlink) - 2nd ShiftRedmond, WA$23–$29 / hourThe Industrial Maintenance Technician at SpaceX works in a fast-paced environment that will oversee the installation and maintenance of our heavy industrial equipment such as cranes, compressed air systems, and overhead doors by third-party contractors to support the production of Starlink. This role will also be responsible for ensuring the smooth operation of our machinery and mechanical equipment as well as installing new equipment, performing regular services, performing maintenance procedures, and troubleshooting equipment breakdowns.
Manufacturing Specialist (Satellite Transceiver) - 2nd Shift SpaceXManufacturing Specialist (Satellite Transceiver) - 2nd ShiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Specialist (Optical Production) - 2nd Shift SpaceXManufacturing Specialist (Optical Production) - 2nd ShiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Specialist - 2nd Shift SpaceXManufacturing Specialist - 2nd ShiftRedmond, WA$34–$40 / hourJoin the Starlink printed circuit board assembly (PCBA) team and take ownership of Surface Mount Technology (SMT) processes that enable the high-volume production of electronics designed for spaceflight. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Development Technician (PCBA) - 2nd Shift (Starlink) SpaceXDevelopment Technician (PCBA) - 2nd Shift (Starlink)Redmond, WA$23–$29 / hourThe ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Starlink Production Technician - 2nd Shift SpaceXStarlink Production Technician - 2nd ShiftRedmond, WA$22–$26.50 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment.
Starlink Production Technician - 2Nd Shift Space Exploration TechnologiesStarlink Production Technician - 2Nd ShiftRedmond, WA$22–$26.50 / hourThis hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
CMM Programmer (Starlink) - 2nd Shift SpaceXCMM Programmer (Starlink) - 2nd ShiftRedmond, WA$34–$40 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This role is tasked with working in close concert with machinists, leads, engineering teams, and machining operations management to increase the accuracy and development part success rate of manufactured components from the Starlink development machining area.
Integration Specialist (Starlink Aviation) - 2nd Shift SpaceXIntegration Specialist (Starlink Aviation) - 2nd ShiftWoodinville, WA$34–$40 / hourDemonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Production Coordinator (Starlink) - 2nd Shift SpaceXProduction Coordinator (Starlink) - 2nd ShiftRedmond, WA$22–$25 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
CMM Programmer (Starlink) - 2Nd Shift Space Exploration TechnologiesCMM Programmer (Starlink) - 2Nd ShiftRedmond, WA$34–$40 / hourThis role is tasked with working in close concert with machinists, leads, engineering teams, and machining operations management to increase the accuracy and development part success rate of manufactured components from the Starlink development machining area. Create, maintain, verify, retain, sort and organize all programs created to ensure they are readily available and saved to the current revision (in close coordination with Quality Assurance supervision).
Manufacturing Specialist - 2Nd Shift Space Exploration TechnologiesManufacturing Specialist - 2Nd ShiftRedmond, WA$34–$40 / hourJoin the Starlink printed circuit board assembly (PCBA) team and take ownership of Surface Mount Technology (SMT) processes that enable the high-volume production of electronics designed for spaceflight. You will bridge the gap between engineering and production - working closely with hardware engineers to improve manufacturability, rapidly troubleshoot issues, and drive continuous improvement in a fast-moving environment.
Development Technician (Pcba) - 2Nd Shift (Starlink) Space Exploration TechnologiesDevelopment Technician (Pcba) - 2Nd Shift (Starlink)Redmond, WA$23–$29 / hourThe ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Integration Specialist (Starlink Aviation) - 2Nd Shift Space Exploration TechnologiesIntegration Specialist (Starlink Aviation) - 2Nd ShiftWoodinville, WA$34–$40 / hourDemonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists. Operate, collect and report data of test findings for a wide variety of tests, including but not limited to: vibration, shock, thermal, RF, load and any other needed testing to meet FAA certification requirements.
Ambulatory Housekeeper 2nd Shift Part-time On-Call Xanitos IncAmbulatory Housekeeper 2nd Shift Part-time On-CallTacoma, WAPart timeXanitos is a specialist in Ambulatory Cleaning Services: professional cleaning services for medical office buildings, clinics, outpatient surgery centers. Cleans rooms, hallways, lobbies, lounges, rest rooms, corridors, elevators, stairways, locker rooms and other work areas.
2nd Shift Supervisor Parker Hannifin Corp2nd Shift SupervisorOHWhether it's helping to land a Black Hawk helicopter safely or making sure air brake systems on semi-trucks perform in any weather, our team builds solutions that keep America moving, protected, and growing. From under the hood of U.S. military trucks like the JLTV and HEMTT, to inside the wings of the F-35 fighter jet and C-130 Hercules, our thermoplastic and fluoropolymer hose products are trusted in the world's most demanding applications.
Braider Machine Operator - 2nd Shift - $22.50/hr. Parker Hannifin CorpBraider Machine Operator - 2nd Shift - $22.50/hr.OHIn this skilled manufacturing role, you will setup and operate industrial braiding to add non-metallic braided layers to hydraulic hose of various sizes and characteristics for use in transportation, agricultural, aviation, and industrial settings. Our manufacturing roles do have some minimum physical requirements, standing for 8+ hours during a shift, the ability to wear required PPE such as safety shoes, eye protection (glasses/goggles), hearing protection, safety vests, and gloves.
Assembly Technician- Overhaul & Repair 2Nd Shift Eaton CorporationAssembly Technician- Overhaul & Repair 2Nd ShiftEuclid, OH$47,000–$69,000 / yearQualifications: Basic (Required) Qualifications: Minimum High School diploma/GED equivalent from an accredited institution+ two (2) years experience in mechanical assembly and/or experience in the maintenance of mechanical devices such as pumps, motors OR, in lieu of HSD/GED degree, completion of accredited trade school or trade certificate program completion+ ten (10) years experience in mechanical assembly, machining and/or maintenance of mechanical devices such as pumps, motors. The Euclid facility has approximately 330 employees and is a leader in the design, development, manufacture and delivery of Aerospace Fuel Pumping components, systems and services to the global aftermarket and OEM markets.
Machine Operator/Setup I - 2nd Shift OSG USA, INC.Machine Operator/Setup I - 2nd ShiftParma, OHJob Functions for a Machine Operator/Setup I: Reads and interprets work orders, drawings/blueprints to determine tooling requirements, setup procedures, control settings, and machining methods and sequences. In this role, your primary function includes setting up and operating computer numerical controlled (CNC) mills, machining centers, or grinders to perform multiple machining and cutting operations.