NewField Service Technician - 2nd shift - Tukwila, WA GLORYField Service Technician - 2nd shift - Tukwila, WATukwila, WARemote$20–$27 / hourShould an agency choose to send unsolicited resumes, Glory reserves the right to review such resumes but will not be held liable for any fees/charges associated with a candidate hire except where a formal written agreement is in place between Glory and the Agency to source candidates for a specific role. Experience repairing high-speed paper handling machines such as check sorters, mail sorters, currency sorters; ATM’s or copier machines experience is preferred.
Avionics Electronics Technician - 2nd Shift (Onsite) RTX CorpAvionics Electronics Technician - 2nd Shift (Onsite)Federal Way, WARegardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Aligns and adjusts advanced electronic components on units being repaired to ensure proper functioning of electronic circuits, utilizing established calibration procedures.
Integration Technician Starlink - 2nd Shift Space Exploration Technologies CorpIntegration Technician Starlink - 2nd ShiftRedmond, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Aerospace NDT Assistant - 2nd Shift Hytek FinishesAerospace NDT Assistant - 2nd ShiftKent, WA$21.80–$24.80 / hourEmployees in this position will learn how to perform tasks in support of the Level 1 and Level II Non-Destructive Testing Inspector(s) including loading, running, and unloading the ovens for stress bakes and vapor degreasing. * FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Polish Operator - 1st or 2nd Shift Hytek FinishesAerospace Polish Operator - 1st or 2nd ShiftKent, WA$21–$24 / hourAs a Polish Operator Trainee, you will learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Integration Technician (Starlink) - 2nd Shift SpaceXIntegration Technician (Starlink) - 2nd ShiftRedmond, WA$23–$29 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Integration Technician (Starlink) - 2Nd Shift Space Exploration TechnologiesIntegration Technician (Starlink) - 2Nd ShiftRedmond, WA$23–$29 / hourYou may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. PREFERRED SKILLS AND EXPERIENCE: 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred.
Aerospace Paint Assistant - 2nd Shift Hytek FinishesAerospace Paint Assistant - 2nd ShiftKent, WA$19.30–$28.80 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace NAS410 NDT Inspector (Mag and Pen) - 2nd Shift Hytek FinishesAerospace NAS410 NDT Inspector (Mag and Pen) - 2nd ShiftKent, WA$21.80–$32.80 / hourThe individual in this role will be considered an Inspector Trainee until certified by the Level III NDT Responsible in each of the three disciplines of NDT Inspection performed at Hytek (Magnetic Particle, Liquid Fluorescent Penetrant, and Nital Etch) and are able to perform the work independently. Candidates must have previous NAS410 Level II certification in Fluorescent Magnetic Particle (Stationary Horizontal Wet Bench) and Fluorescent Liquid Penetrant (Methods A&B) in the Aerospace Industry, including well-documented OJT training hours.
26-27 Part Time Faculty Pool - Aviation Maintenance Technology Seattle Colleges26-27 Part Time Faculty Pool - Aviation Maintenance TechnologySeattle, WASeattle Colleges is looking for innovative and dedicated faculty members, who have a demonstrated commitment to working within a college community that is diverse and serves students from a broad spectrum of socioeconomic and academic backgrounds. We are a district of three distinct colleges: North Seattle College, Seattle Central College, and South Seattle College and five specialty training centers, which makes us the largest and most diverse community college district in the state of Washington.
Aerospace Abrasive Blast Operator - 1st Shift Hytek FinishesAerospace Abrasive Blast Operator - 1st ShiftKent, WA$21–$40 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Drylube/10-85 Painter - 3rd Shift Hytek FinishesAerospace Drylube/10-85 Painter - 3rd ShiftKent, WA$22.10–$25.10 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Chrome Masker - 1st Shift Hytek FinishesAerospace Chrome Masker - 1st ShiftKent, WA$18.50–$21 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Platers, and Department Leads.
Aerospace Shot Peen Inspector - 3rd Shift Hytek FinishesAerospace Shot Peen Inspector - 3rd ShiftKent, WA$22.10–$31.10 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Zinc Nickel Assistant - 3rd Shift Hytek FinishesAerospace Zinc Nickel Assistant - 3rd ShiftKent, WA$22.10–$23 / hourFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Cadmium Assistant - 3rd Shift Hytek FinishesAerospace Cadmium Assistant - 3rd ShiftKent, WA$22.10–$23 / hourFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Numerical Control Programmer 3 - Machining & Tooling The Structures Company, LLCNumerical Control Programmer 3 - Machining & ToolingAuburn, WACreate, verify, and revise Machine Control Data (MCD) , tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis ). As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.
Numerical Control Programmer 4 - Machining & Tooling The Structures Company, LLCNumerical Control Programmer 4 - Machining & ToolingAuburn, WACreate, verify, and revise Machine Control Data (MCD) , tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis ). As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.
Aircraft Painter TSMGAircraft PainterSeattle, WAYour expertise in surface preparation, painting, and finishing will be crucial in ensuring aircraft are ready for operation and maintain their durability in various conditions. Key Responsibilities: Prepare aircraft surfaces for painting by cleaning, masking, and sanding areas to remove old paint or contaminants.