85 Results for

2nd Shift Education Jobs in Kent, WA

Jobs

Woodmont Beach, WA

Full time

Ability to see/hear/feel constantly - hearing protection required when working in the area Occasionally exposed to moving mechanical parts, fumes or airborne particles, and fumes from metal finishing chemicals. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

30+ days ago

Woodmont Beach, WA

Full time

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.

30+ days ago

Woodmont Beach, WA

Full time

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

30+ days ago

Woodmont Beach, WA

Full time

30+ days ago

Woodmont Beach, WA

Full time

Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

30+ days ago

Renton, WA

Full time

The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

30+ days ago

Renton, WA

Full time

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

30+ days ago

Renton, WA

Full time

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 2nd Shift Schedule:

30+ days ago

Renton, WA

Full time

E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

30+ days ago

Woodmont Beach, WA

Full time

l learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.

30+ days ago

Bonney Lake, WA

$91,500–$110,000 / year
Full time

Coordinate and communicate production activities with external customers and internal departments including logistics, engineering, and production management (to include management on other shifts). With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

30+ days ago

Auburn, WA

$18–$25 / hour

The ideal candidate will work from a job schedule, retrieve staged jobs for sandblasting, complete required paperwork, and deliver finished work to the appropriate areas upon completion. Strong interpersonal and communication skills, with the ability to work collaboratively in a team environment and interact effectively with individuals of diverse personalities and communication styles.

23 days ago

Auburn, WA

$18–$27 / hour

We are a fully integrated, self-funded nonprofit organization with a social mission to train, employ, and serve persons with disabilities and our community. Ability to verify that product work orders, purchase orders, and all associated documentation correspond to part number, revision, quantity, and quality requirements.

23 days ago

Kirkland, WA

$24.52–$36.79 / hour

ESSENTIAL JOB FUNCTIONS** + May occasionally perform the set-up, testing and troubleshooting of circuits, components, instruments and mechanical assemblies + Test and troubleshoot (less complex) assemblies and/or final systems + May occasionally complete rework on assemblies and/or systems as a result of testing + May occasionally prepare reports of summarizing findings + May occasionally assist in the set-up of specialized test equipment + Monitor and adjust production processes for quality and productivity + Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components **MINIMUM QUALIFICATIONS** **Education/Experience:** + Associate degree (AS) in Electronics Technology or related field/ equivalent electronics military schooling and experience required * _High-power electronics and/or high-power avionics technician experience may be considered in lieu of formal education. If you are interested in working at a dynamic company with a winning culture which has **won awards as one of Washington's Best Places to work for 16 years consecutively, please read on!** **JOB SUMMARY** The Production Test Technician should have a basic mechanical/electrical knowledge, seeking further guidance from Sr.

25 days ago

Kirkland, WA

ul>

System Integration & Setup: Perform functions associated with all manufacturing operations, including working with engineers in set-up, as well as performing troubleshooting, rework, and quality testing related to the production of parts, components, subassemblies, and final assemblies.

This role performs high-level technical functions across the full manufacturing lifecycle, assisting engineering with the setup of complex systems, rigorous quality testing, and the troubleshooting and rework required to bring aerospace components to final flight-readiness.

30+ days ago

Kirkland, WA

$20.12–$27.22 / hour

Astronics AES offers a competitive benefits package including: Stay Healthy - Health, dental, vision, disability, life insurance, FSA, HSA, as well as voluntary life/AD&D, voluntary critical illness, accident prevention and hospital indemnity. Perform basic electronic, electromechanical, mechanical or measurement product assembly operations on product components, assemblies, or subassemblies.

28 days ago

Seattle, WA

Remote

$20–$27 / hour

Should an agency choose to send unsolicited resumes, Glory reserves the right to review such resumes but will not be held liable for any fees/charges associated with a candidate hire except where a formal written agreement is in place between Glory and the Agency to source candidates for a specific role. Experience repairing high-speed paper handling machines such as check sorters, mail sorters, currency sorters; ATM’s or copier machines experience is preferred.

14 days ago

Auburn, WA

$20–$24 / hour

li>

For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions. In all actions, supports Sonaca North America's Quality Policy, Mission Statement and other Company policies and procedures by supporting our commitment to total customer satisfaction, quality products and services, lean processes, continuous improvement, on-time delivery, safety, teaming, individual accountability and respect for people.

30+ days ago

Auburn, WA

$20–$24 / hour

In all actions, supports the Quality Policy, Mission Statement and other policies and procedures by supporting our commitment to total customer satisfaction, quality products and services, lean processes, continuous improvement, on-time delivery, safety, teaming, individual accountability and respect for people. Our Assemblers primary functions would be drilling and deburring parts to ready for assembly, assembly of component parts including attaching parts together by installing ground studs, attaching nutplates or bonding.

30+ days ago

Auburn, WA

$30–$45 / hour

p>ITAR - US PERSON STATUS Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military-related technologies may only be accessed, viewed, or shared by US Persons as defined by law. The ideal candidate will determine and utilize product configuration requirements via customer drawings (blueprints), 3D models, and applicable specifications to produce programs and inspect products on Coordinate Measuring Machines.

30+ days ago

Auburn, WA

$18–$21 / hour

p>ITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. The incumbent will identify, prioritize, and pull materials identified on manufacturing work orders; set up or assist in setting up machinery to proper dimensions specified on manufacturing work orders; ensure finished material is delivered to other work areas; and ensure work orders are filled out accurately.

30+ days ago

Auburn, WA

$18–$38 / hour

Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).

30+ days ago

Woodinville, WA

$23–$29 / hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour

30+ days ago

Woodinville, WA

$38–$45 / hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour

30 days ago

Redmond, WA

$22–$26.50 / hour

unassisted + Ability?to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay Range: Level 1: $22.00 - $26.50 Level 2: $25.50 - $31.00 Level 3: $29.50 - $37.00 ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

15 days ago

Redmond, WA

$34–$40 / hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.

30+ days ago

Redmond, WA

$38–$45 / hour

RESPONSIBILITIES: + Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes + Responsible for all types of drilling, tapping and milling and turning + Completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for machining complex, tight tolerances parts and various materials + Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 7+ years of experience in the setup and operation of CNC machines + G-code experience PREFERRED SKILLS AND EXPERIENCE: + 10+ years of experience in the setup and operation of CNC machines + Experience with GD&T or interpreting blueprints/manufacturing drawings + Short run, prototype, non-production machining experience + Horizontal mill experience + Basic programming experience + Experience running lathes + live tooling ADDITIONAL REQUIREMENTS: + Must be available for 10 hour shifts. unassisted + Able to stand for extended periods- 8 hours min + Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces + Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay Range: Level 4: $38.00 - $45.00 Level 5: $43.00 - $52.00

20 days ago

Redmond, WA

$23–$29 / hour

RESPONSIBILITIES: + Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes + Responsible for all types of drilling, tapping and milling and turning + Completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for machining complex, tight tolerances parts and various materials + Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 3+ years of experience in the setup and operation of CNC machines + G-code experience PREFERRED SKILLS AND EXPERIENCE: + Experience with GD&T or interpreting blueprints/manufacturing drawings + Short run, prototype, non-production machining experience + Horizontal Mill experience + Experience running lathes + live tooling ADDITIONAL REQUIREMENTS: + Must be available for 10 hour shifts. unassisted + Able to stand for extended periods- 8 hours min + Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces + Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay Range: Level 1: $23.00 - $29.00 Level 2: $28.00 - $34.50 Level 3: $33.00 - $40.00

20 days ago

Woodinville, WA

$22–$24 / hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RECEIVING SPECIALIST (STARLINK) - 2ND SHIFT Starlink is the world's first and largest satellite constellation using a low Earth orbit to deliver broadband internet capable of supporting streaming, online gaming, video calls and more.

25 days ago

Redmond, WA

$34–$40 / hour

This role will be covering 2nd shift (typical start time is 4pm) + Must be able to stand for long periods of time + Must be able to lift up to 25 pounds unassisted + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay Range: Level 1: $34.00 - $40.00 Level 2: $38.00 - $45.00 Level 3: $42.00 - $51.00 ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

20 days ago

Redmond, WA

$34–$40 / hour

RESPONSIBILITIES: + Execute new product introduction builds across all work centers + Assist with initial PCBA line setup, facility requests, and programming of equipment + Program, load, and operates automated equipment + Design custom fixtures for PCBA to ensure efficient process flow + Train technicians to run/troubleshoot complex machines + Triage non-conforming product and drives resolution and preventative actions + Resolve production issues while ensuring design integrity, product quality, and delivery timelines + Perform process development and validation on new models in extremely aggressive timelines + Ensure the successful transition of a product's development + Identify continuous improvement opportunities for yield, performance, and cost + Define maintenance schedules and support activities + Optimize and configure processes and equipment for building surface mount electronics assemblies + Perform design of experiments (DOE) to optimize SMT process yield + Specify equipment requirements for new PCBA build processes + Develop design for manufacturability (DFM) guidelines for PCBA designs + Provide solutions to streamline space-grade circuit board assembly and test processes which may include flying probe, AOI, and functional testing, reflow soldering, selective soldering, and conformal coating + Resolve production issues on the spot while ensuring design integrity allowing us to stay on schedule + Facilitate a close relationship with the engineering team during design, build, and test to provide design feedback BASIC QUALIFICATIONS: + High school diploma or equivalency certificate and 2+ years of experience working in SMT or PCBA process engineering; OR bachelor's degree in an engineering, math or science discipline PREFERRED SKILLS AND EXPERIENCE: + Strong work ethic and drive to succeed + Ability to work in a fast paced, autonomously driven, and demanding start-up atmosphere + Excellent communication skills, both written and verbal + Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware + Hands on experience with optimizing SMT pick and place, reflow oven, conformal coating, or through hole soldering systems ADDITIONAL REQUIREMENTS: + Must be able to work all required shift hours, overtime, and weekends as needed. Estimated shift times; 2nd Shift: 3:30PM - 1:30AM + Must be able to lift 25 pounds unassisted + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position COMPENSATION & BENEFITS: Pay range: SMT Specialist /Level 1: $34.00 - $40.00/hour SMT Specialist /Level 2: $38.00 - $45.00/hour SMT Specialist /Level 3: $42.00 - $51.00/hour

30+ days ago

Auburn, WA

$18–$29 / hour

The ideal candidate will identify and pull the correct material identified on a manufacturing order, load and operate computer programs with dimensions specified by the manufacturing work order, set up the punch to the proper dimensions specified on the manufacturing work order, punch material, deliver finished material to other work areas, and complete the detailed work order.

Due to Skills Inc.'s participation in the defense industry, the International Traffic in Arms Regulations (ITAR) require that access to sensitive information and material pertaining to defense and military-related technologies may only be accessed, viewed, or shared by US Persons as defined by law.

30+ days ago

Redmond, WA

$23–$29 / hour

RESPONSIBILITIES: + Support production engineering during development and pre-production phases by building, assembling, and testing pre-production, qualification, and flight PCBA hardware + Assist with initial PCBA line setup, equipment programming, qualification of test setups, and transition of new designs into production + Program, load, and operate automated SMT production machines including pick & place, reflow ovens, stencil printers, conformal coating, AOI, and X-ray systems + Operate and troubleshoot SMT equipment (pick & place, reflow ovens, stencil printers, conformal coating, AOI, X-ray) with a focus on process stability and yield improvement + Perform rework and recovery on non-conforming hardware while maintaining design integrity and documenting root causes + Support continuous improvement projects including test rack builds, factory automation, and production line enhancements + Thoroughly document processes, failures, and improvements using data to drive corrective actions and yield increases + Provide surge support for critical production, qualification, or development builds + Collaborate with engineers to give real-time feedback on manufacturability, DFM opportunities, and process issues + Assist with training of junior technicians on SMT equipment operation and basic troubleshooting + Work with production support teams to guarantee the daily success of PCBA production safely, reliably, and at rate BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ years of hands-on experience in SMT/PCBA manufacturing, assembly, or test PREFERRED SKILLS AND EXPERIENCE: + Associates degree, apprenticeship, or military electronics technician training + Experience working directly with engineers in development or new process introduction (NPI) environments + Hands-on experience programming and optimizing SMT processes (pick & place, reflow, conformal coating, through-hole, AOI, or X-ray inspection) + Proficiency reading and interpreting schematics, assembly drawings, Gerber files, and work instructions + Soldering experience with IPC-A-610 or J-STD-001 certification (Class 2 or 3) + Strong troubleshooting and problem-solving skills with minimal supervision + Proficient with Microsoft Excel, Word, PowerPoint, and basic ERP systems + Excellent attention to detail with the ability to identify subtle defects and maintain high-quality output in a high-volume environment + Positive attitude, strong team player, and willingness to provide constructive feedback to improve designs and tooling + Previous aerospace, automotive, or high-reliability electronics manufacturing experience COMPENSATION AND BENEFITS: Pay range: Production Development Technician/Level 1: $23.00 - $29.00/hour Production Development Technician/Level 2: $28.00 - $34.50/hour Production Development Technician/Level 3: $33.00 - $40.00/hour The ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities.

30+ days ago

Woodinville, WA

$34–$40 / hour

RESPONSIBILITIES: + Install and repair Starlink products for Aviation systems under strict FAA, Warp and other governing guidelines + Operate, collect and report data of test findings for a wide variety of tests, including but not limited to: vibration, shock, thermal, RF, load and any other needed testing to meet FAA certification requirements + Create and document test processes utilizing Test Plan, TestX and Warp related features + Design, procure and perform mechanical and electrical assembly, activation of mission-specific development and continuous-integration test systems for all of Starlink aviation platforms + Drive troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues + Ensure product quality and conformance to specifications + Work closely with development and design engineers, machine shops and external partners on a wide variety of assignments BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2 years working in an electrical or mechanical test/integration environment; OR a bachelor's in a STEM field PREFERRED SKILLS AND EXPERIENCE: + Experience working on aircraft or with aviation/aerospace related hardware + A&P certification + Inspection authorized (IA) certification + Bachelor's degree or 3+ years' experience in related field + Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists + Hands-on experience performing installation work on aircraft. + Hands-on experience fabricating harnesses, electro-mechanical assemblies, printed circuit board assemblies, and test stations + Excellent attention to detail and an insistence on permanently correcting errors + Electromechanical build processes including iron & hot-air soldering; wire crimping and stripping; machine and hand drilling, shaping, cutting, and joining; 3D plastic printing + Electrical debug tools including multimeter, oscilloscope, spectrum analyzer, network analyze + Experience working in a variety of software environments, applications, and languages including Linux, Windows, Microsoft Office, git, SVN, JIRA, Altium, Mentor PCB, NX, Bash, and Python ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed.

30+ days ago

Redmond, WA

$34–$40 / hour

RESPONSIBILITIES: + Optimize PCBA manufacturing processes including paste print, pick-and-place, reflow, conformal coating, selective soldering, board wash, and inspection (X-ray, AOI, SPI, visual) + Program, configure, and improve automated SMT equipment to maximize yield and throughput + Design custom fixtures and tooling to improve process efficiency and ergonomics + Perform Design of Experiments (DOE) and data analysis to drive process capability and yield improvements + Train and mentor technicians on advanced equipment operation and troubleshooting + Rapidly triage and resolve production issues while protecting design integrity and schedule + Define equipment requirements and support validation for next-generation PCBA processes + Identify and execute continuous improvement projects targeting yield, cycle time, and cost + Partner closely with design engineering teams to provide real-time manufacturability feedback + Execute new product introduction (NPI) for PCBA assemblies across multiple work centers + Work with external support teams to guarantee the daily success of PCBA production safely, reliably, and at rate BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2+ years of troubleshooting technical problems in a manufacturing environment PREFERRED SKILLS AND EXPERIENCE: + Bachelor's degree in an engineering, math, or science discipline + Ability to thrive in a fast paced, autonomously driven, and demanding start-up atmosphere + Excellent communication skills, both written and verbal + Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware + Hands on experience with optimizing SMT pick and place, reflow oven, conformal coating, or through hole soldering systems + Software development, professional application power user, or competitive video gaming skills + Excellent attention to detail with the ability to identify subtle defects and maintain high-quality output in a high-volume environment + Ability to collect and analyze data to improve processes and quality + Positive attitude, strong team player, and willingness to provide constructive feedback to improve designs and tooling + Previous aerospace, automotive, or high-reliability electronics manufacturing experience COMPENSATION & BENEFITS: Pay range: SMT Specialist /Level 1: $34.00 - $40.00/hour SMT Specialist /Level 2: $38.00 - $45.00/hour SMT Specialist /Level 3: $42.00 - $51.00/hour ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

30+ days ago

Redmond, WA

$34–$40 / hour

Help others around them to exceed the expectations of their job BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 3+ years of CMM programming experience PREFERRED SKILLS AND EXPERIENCE: + 5+ years CMM experience, including programming on multi-sensing CMMs (vision, laser, touch probe, etc.) + Ability to read and understand GD&T and all drawing criteria, notes and tolerances + Ability to assist with designing/developing quality gauging to improve efficiency + Understands and adheres to ISO 9001 + Experience with set-up of CMM and Romer Arm (or other portable non-DCC arm) + Understands what tool is required to complete the job at hand ADDITIONAL REQUIREMENTS: + Willing to work shift hours: 3:00PM to 1:30AM PT + Ability to lift 25 lbs. + Create, maintain, verify, retain, sort and organize all programs created to ensure they are readily available and saved to the current revision (in close coordination with Quality Assurance supervision) + Work with cross functional teams to continuously improve the processes and specifications that govern precision inspection within the work center and beyond + Assist engineering with making part inspection plans + Identify engineering, design, GD&T issues and errors creating ambiguity in the manufacturing and inspection process.

30+ days ago

Redmond, WA

$34–$40 / hour

Estimated shift start time: 4PM + Must be able to stand for long periods of time + Must be able to lift up to 25 pounds unassisted + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay Range: Level 1: $34.00 - $40.00 Level 2: $38.00 - $45.00 Level 3: $42.00 - $51.00 ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

15 days ago

Seattle, WA

Learn more at https://www.xerox.com/en-us/jobs/connection and explore our commitment to connection and belonging! Today, Xerox is continuing its legacy of innovation to deliver client-centric and digitally-driven technology solutions and meet the needs of today's global, distributed workforce.

17 days ago

Tacoma, WA

Part time

Xanitos is a specialist in Ambulatory Cleaning Services: professional cleaning services for medical office buildings, clinics, outpatient surgery centers. Cleans rooms, hallways, lobbies, lounges, rest rooms, corridors, elevators, stairways, locker rooms and other work areas.

30+ days ago

Puyallup, WA

$18.50–$22.52 / hour
Part time

We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes.

16 days ago

Redmond, WA

$27.40–$49.04 / hour

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

30+ days ago

Redmond, WA

$22.83–$42.54 / hour

30+ days ago

Redmond, WA

To help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

30+ days ago

$23–$29 / hour

p>RESPONSIBILITIES:

• Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes • Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices • Responsible for troubleshooting • Responsible for completing machining operations from blueprints, drawings and/or verbal instructions • Responsible for working with complex, tight tolerance parts and various materials. unassisted Ability to stand for extended periods - 8 hours min Ability to stoop, bend, crawl, and being able to maneuver in tight spaces Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting.

30+ days ago

Redmond, WA

$22–$26.50 / hour

li>Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting.

ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

16 days ago

$38–$45 / hour

p>ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.

30 days ago

Woodinville, WA

$110,000–$140,000 / year

As a technical leader, the Precision Machining Supervisor will meet customer rate demands, proactively identify and resolve production schedule issues, continuously develop and improve production processes, and inspire the team to achieve consistent machining excellence. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

30 days ago

Redmond, WA

Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements.

15 days ago

$22–$26.50 / hour

We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters.

ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

3 days ago

$22–$24 / hour

p>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Leveraging advanced satellites and user hardware coupled with our deep experience with both spacecraft and on-orbit operations, Starlink delivers high-speed, low-latency internet to users all over the world.

30+ days ago

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift Education job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

2nd Shift Education Jobs in Kent, WA

Aerospace Packager - 2nd Shift Hytek Finishes

Aerospace Cadmium Masker - 2nd Shift Hytek Finishes

Aerospace Painter - 2nd Shift Hytek Finishes

Aerospace Titanium-Cadmium Assistant - 2nd Shift Hytek Finishes

Aerospace Anodize Operator - 2nd Shift Hytek Finishes

Aerospace Assembler I - 2nd Shift Sekisui Aerospace

Aerospace Assembler II - 2nd Shift Sekisui Aerospace

Aerospace Production - Kit Cutter I - 2nd Shift Sekisui Aerospace

Aerospace Production - Kit Cutter I - Weekend 2nd Shift Sekisui Aerospace

Aerospace Polish Operator - 1st or 2nd Shift Hytek Finishes

Production Supervisor, 2nd Shift Sekisui Aerospace

Sander: 2nd Shift; Monday-Thursday 4pm-2:30am SKILLS INC

Finish Inspector: 2nd Shift; Monday-Thursday 4pm-2:30am SKILLS INC

Production Test Technician, 2nd Shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2025-127) Astronics

Sr. Production Test Technician - 2nd Shift Protingent

Team Assembler, 2nd shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2026-074) (WA, Kirkland) Astronics Corp

Field Service Technician - 2nd shift - Seattle, WA GLORY

Press Brake - 2nd Shift LMI Aerospace Inc

Assembly - 2nd Shift LMI Aerospace Inc

CMM Operator: 2nd Shift; Monday-Friday 3:30pm-12:00am SKILLS INC

Manufacturing Helper: 2nd Shift; Monday-Friday 3:30pm-12:00am SKILLS INC

CNC Machinist: 2nd Shift; Monday-Friday 3:30pm-12:00am SKILLS INC

Production Machinist (Starlink) - 2nd Shift SpaceX

Production Machinist (Starlink) - 2nd Shift - Level 4/5 SpaceX

Diamond Turning Technician (Starlink) - 2nd Shift SpaceX

Integration & Test Specialist (Bus & Payload Sub-Assemblies) - 2nd shift SpaceX

CNC Machinist (Starlink) - 2nd Shift - Level 4/5 SpaceX

CNC Machinist (Starlink) - 2nd Shift SpaceX

Receiving Specialist (Starlink) - 2nd Shift SpaceX

Test Specialist (Starlink) - 2nd Shift SpaceX

SMT Specialist - 2nd Shift SpaceX

Punch Operator: 2nd Shift; Monday-Friday 3:30pm-12:00am SKILLS INC

Development Technician (PCBA) - 2nd Shift (Starlink) SpaceX

Integration Specialist (Starlink Aviation) - 2nd Shift SpaceX

Manufacturing Specialist - 2nd Shift SpaceX

CMM Programmer (Starlink) - 2nd Shift SpaceX

Manufacturing Specialist (Optical Production) - 2nd Shift SpaceX

Order Desk Operator 2nd shift - Seattle WA Xerox Corp

Ambulatory Housekeeper 2nd Shift Part-time Xanitos Inc

Expediter - 2nd Shift Hormann Northwest Door LLC

Manufacturing Technician C - 2nd Shift L3Harris Technologies Inc

Manufacturing Technician B - 2nd Shift L3Harris Technologies Inc

Manufacturing Technician C - 2nd Shift 1 L3Harris Technologies Inc

Production Machinist Starlink - 2nd Shift Space Exploration Technologies Corp

Diamond Turning Technician Starlink - 2nd Shift Space Exploration Technologies Corp

Production Machinist Starlink - 2nd Shift - Level 4/5 Space Exploration Technologies Corp

Supervisor, Precision Machining Starlink - 2nd Shift Space Exploration Technologies Corp

2nd Shift Medical Device Assembler iMPact Business Group

Receiving Inspector Starlink - 2nd Shift Space Exploration Technologies Corp

Receiving Specialist Starlink - 2nd Shift Space Exploration Technologies Corp

Resume Resources