Test & Evaluation Engineer Dynamo Technologies LLCTest & Evaluation EngineerAberdeen Proving Ground, MD$120,000–$160,000 / yearThe selected candidate will support the development, planning, execution, analysis, and documentation of classified and unclassified test activities for products within the Combat Ready PNT portfolio. Develop, review, and support test documentation including Test and Evaluation Master Plans (TEMPs), test plans, test procedures, Test Readiness Review (TRR) materials, test reports, and test results.
Test Coordination Systems Engineer PeratonTest Coordination Systems EngineerFort Meade, Maryland$135,000–$216,000 / yearFull timeThis is a government-contracted Systems Engineering and Technical Assistance (SETA) role in which the selected systems engineer will serve as the central, active facilitator of contractual and programmatic test events by driving communication, streamlining information reception, and removing dependencies across multiple Government teams and vendors. Peraton offers enhanced benefits to employees working on this critical National Security program, which include heavily subsidized employee benefits coverage for you and your dependents, 25 days of PTO accrued annually up to a generous PTO cap and eligible to participate in an attractive bonus plan.
Test Design Engineer II Blue OriginTest Design Engineer IIWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Test Design Engineer II (fixed term) Blue OriginTest Design Engineer II (fixed term)Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Senior Controls Engineer Clemco IndustriesSenior Controls EngineerWashingtonPosition Title: Senior Controls Engineer Department: Engineered Solutions FLSA Status: Salaried JOB SUMMARY The Controls Engineer will design new products and improve existing products using their knowledge of automation, technology, material, and manufacturing processes. Conduct Root Cause Analysis (Conduct and facilitate root cause analysis to determine metrics, troubleshoot manufacturing and assembly issues, material flow, project plans, production capacity, facility design and create process documentation.).
Electrical Project Engineer KLM CareersElectrical Project EngineerCockeysville, MarylandJMT is seeking candidates with a wide range of design and engineering experience with building electrical systems including lighting systems, power and emergency power distribution systems; fire alarm systems; security; CCTV and access control; and communication systems. 2. Do you have 5-10 years experience related to electrical power distribution, power generation, motor controls, lighting and lighting controls, fire alarm design, telecommunications network design, or security systems design.
2027 PhD Graduate - Autonomous Systems Design Engineer: Controls, Navigation, Sensors, and Simulation Johns Hopkins Applied Physics Laboratory2027 PhD Graduate - Autonomous Systems Design Engineer: Controls, Navigation, Sensors, and SimulationLaurel, MarylandFull timeIf so, the Strike Guidance, Navigation, Controls (GNC), and Seekers group is looking for PhDs who are pursuing degrees in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Software Engineering, Systems Engineering, Physics, Mathematics, or Computer Science. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development.
Thermal Analysis Engineer - Level 2 - Baltimore Northrop Grumman CorpThermal Analysis Engineer - Level 2 - BaltimoreBaltimore, MD$87,600–$131,400 / yearThe qualified candidate will initially work closely with senior staff and work with a diverse and talented team of engineers helping to develop, analyze, and test everything from electronic components through hardware and integrated systems in support of a broad range of products and business areas within the Space Systems Sector. The Thermal Design and Analysis Engineer will be involved during all phases of program development from concept design through hardware integration and test efforts, with responsibilities ranging from design inputs, completing thermal analyses, presenting at design reviews, writing test reports, and helping with product test planning and execution.
Thermal Analysis Engineer - Level 3/4 - Baltimore Northrop Grumman CorpThermal Analysis Engineer - Level 3/4 - BaltimoreBaltimore, MD$108,800–$163,200 / yearThe qualified candidate will initially work closely with senior staff and work with a diverse and talented team of engineers helping to develop, analyze, and test everything from electronic components through hardware and integrated systems in support of a broad range of products and business areas within the Space Systems Sector. The Thermal Design and Analysis Engineer will be involved during all phases of program development from concept design through hardware integration and test efforts, with responsibilities ranging from design inputs, completing thermal analyses, presenting at design reviews, writing test reports, and helping with product test planning and execution.
Structural Analysis Engineer - Level 2/3 - Baltimore Northrop Grumman CorpStructural Analysis Engineer - Level 2/3 - BaltimoreBaltimore, MD$87,600–$131,400 / yearThe qualified candidate will initially work closely with senior staff and work with a diverse and talented team of engineers helping to develop, analyze, and test everything from electronic components through hardware and integrated systems in support of a broad range of products and business areas within the Space Systems Sector. The Structural Design and Analysis Engineer will be involved during all phases of program development from concept design through hardware integration and test efforts, with responsibilities ranging from design inputs, completing structural analyses, presenting at design reviews, writing test reports, and helping with product test planning and execution.
Lead Engineer, Tooling Design and Support Rocket Lab CorporationLead Engineer, Tooling Design and SupportMiddle River, MDTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity’s reach to the Moon, Mars, and beyond.
Lead Engineer, GSE and Production Tooling Rocket Lab CorporationLead Engineer, GSE and Production ToolingMiddle River, MDTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity’s reach to the Moon, Mars, and beyond.
Sr. Responsible Engineer, Deployment Mechanism – TeraWave Solar Array Blue OriginSr. Responsible Engineer, Deployment Mechanism – TeraWave Solar ArrayWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. You will define deployment architectures, drive rapid design-build-test cycles to burn down risk, and coordinate interfaces with the solar power module, photovoltaic assembly, and harness teams to ensure the deployer integrates cleanly into the full wing.
Tube Shop Manufacturing Engineer Blue OriginTube Shop Manufacturing EngineerWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. If you share our vision, thrive in a dynamic startup environment, excel on integrated cross-functional teams of experienced and skilled individuals in several relevant technologies (even if perhaps not in the aerospace industry), continuously seek out opportunities to learn and improve, and do not allow title or job description to limit the depth or breadth of your contributions, then we would love to hear from you.
Manufacturing Engineer Blue OriginManufacturing EngineerWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Core Manufacturing Engineering Scope : Own the full manufacturing engineering lifecycle: review designs for manufacturability, define work instructions and work orders, manage BOMs, disposition non-conformances, and drive continuous improvement to hit rate, quality, and cost targets.
Sr. Systems Engineer (MBSE) CACISr. Systems Engineer (MBSE)Aberdeen Proving Ground, Maryland$126,100–$277,300 / yearPay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Systems Engineer (MBSE)Job Category: EngineeringTime Type: Full timeMinimum Clearance Required to Start: SecretEmployee Type: RegularPercentage of Travel Required: Up to 10%Type of Travel: Local* * * The Opportunity:
NS-Tactical Network Engineer NETSEA TechnologiesNS-Tactical Network EngineerAPG, MDPosition Overview: The Tactical Network Engineer provides hands-on engineering and technical support for Army tactical communications systems, ensuring reliable integration and operation across complex network environments. Troubleshooting & Operational Support: Perform Tier 1/2 diagnostics and fault isolation across tactical network systems; resolve issues or coordinate escalation for complex engineering challenges.
Sr Principal Quality Engineer Northrop Grumman CorpSr Principal Quality EngineerBaltimore, MD$123,400–$185,000 / yearBachelor of Science Degree in a STEM (Science, Technology, Engineering, and Mathematics) field with a minimum of 8 years of engineering experience in Quality Assurance, which can include investigating failures and identifying root causes or in Manufacturing, Process, Electrical or Mechanical Engineering field of work performing technical job functions; OR a minimum of 6 years of engineering experience in Quality Assurance, which can include investigating failures and identifying root causes or in Manufacturing, Process, Electrical or Mechanical Engineering field of work performing technical job functions with a Masters Degree in a STEM field; OR a minimum of 4 years of engineering experience in Quality Assurance, which can include investigating failures and identifying root causes or in Manufacturing, Process, Electrical or Mechanical Engineering field of work performing technical job functions with a PhD. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Principal Engineer Quality (Second Shift) Northrop GrummanPrincipal Engineer Quality (Second Shift)Baltimore, MD$98,900–$148,300 / yearBasic Qualifications for the Principal Quality Engineer: Bachelor of Science Degree in a related STEM field with a minimum of 5 years of engineering experience in Quality Assurance, which can include investigating failures and identifying root causes or in Manufacturing, Process, Electrical or Mechanical Engineering field of work, performing technical job functions; OR a Master's degree in a related STEM field with a minimum of 3 years of engineering experience in Quality Assurance, which can include investigating failures and identifying root causes or in Manufacturing, Process, Electrical or Mechanical Engineering field of work performing technical job functions; OR a PhD in a related STEM field with a minimum of 1 year of engineering experience in Quality Assurance, which can include investigating failures and identifying root causes or in Manufacturing, Process, Electrical or Mechanical Engineering field of work, performing technical job functions. Audit quality systems, identify deficiencies, and drive corrective actions that meet reliability and documentation requirements; plan, conduct, report, and follow‑up on audits to ensure compliance and continual process improvement.
Computer Vision Engineer, Space ANDURIL INDUSTRIESComputer Vision Engineer, SpaceWashington, DC$166,000–$220,000 / yearThe Computer Vision Engineer will work algorithm design, truth and physics modeling, scene rendering, simulation and analysis for a wide variety of spacecraft and space missions to include but not limited to LEO, MEO, GEO, Reentry, and RPOD (Rendezvous Proximity Operations and Docking). In this role, you will be responsible for working on and understand the design of all perception subsystems to include but not limited to hardware sensors and advanced processing platforms, navigation algorithms, flight software implementation, subsystem integration & test (I&T), and vehicle I&T.