Manufacturing Specialist Satellite Transceiver - 2nd Shift Space Exploration Technologies CorpManufacturing Specialist Satellite Transceiver - 2nd ShiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Aerospace NAS410 NDT Inspector (Mag and Pen) - 2nd Shift Hytek FinishesAerospace NAS410 NDT Inspector (Mag and Pen) - 2nd ShiftKent, WA$21.80–$32.80 / hourThe individual in this role will be considered an Inspector Trainee until certified by the Level III NDT Responsible in each of the three disciplines of NDT Inspection performed at Hytek (Magnetic Particle, Liquid Fluorescent Penetrant, and Nital Etch) and are able to perform the work independently. Candidates must have previous NAS410 Level II certification in Fluorescent Magnetic Particle (Stationary Horizontal Wet Bench) and Fluorescent Liquid Penetrant (Methods A&B) in the Aerospace Industry, including well-documented OJT training hours.
Manufacturing Specialist (Satellite Transceiver) - 2nd Shift SpaceXManufacturing Specialist (Satellite Transceiver) - 2nd ShiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Aerospace Paint Assistant - 2nd Shift Hytek FinishesAerospace Paint Assistant - 2nd ShiftKent, WA$19.30–$28.80 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Abrasive Blast Operator - 1st Shift Hytek FinishesAerospace Abrasive Blast Operator - 1st ShiftKent, WA$21–$40 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Cannabis Production Worker 1St Shift Green RevolutionCannabis Production Worker 1St ShiftPoulsbo, WAExperience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. As a 1st Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.).
Cannabis Production Worker 1st Shift Green RevolutionCannabis Production Worker 1st ShiftPoulsbo, WAExperience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. As a 1st Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.).
Security Senior Service Technician Allied UniversalSecurity Senior Service TechnicianFort Worth, TexasThe Senior Service Technician will be responsible for service, maintenance, repairs, and troubleshooting/diagnostics on access control equipment and IP-based video systems, including but not limited to: electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems, and intercom systems. including, but not limited to: (Electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems and intercom systems).
Power Generation Technical Services Representative Kirby CorpPower Generation Technical Services RepresentativeDallas, TXProvide technical assistance and information to external and internal customers in order to resolve technical problems that may occur with products, including service of parts or equipment, repair techniques, and new product changes on parts. Assist in the design and development of technical training materials and curriculum with the Company's training department to teach customers about aftermarket equipment, including the development of equipment instruction and use manuals.
Service Technician AramarkService TechnicianDallas, TXPerform scheduled and unscheduled service activities including emergency service calls, preventative maintenance, surveys, and installations. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential.
Senior BMS Service Technician Mantis InnovationSenior BMS Service TechnicianDallas, TX$85,000–$125,000 / yearOur work spans four core areas: Building Controls, Energy Efficiency, Energy Advisory, and Facility Management-covering HVAC/mechanical optimization, BMS/BAS and EPMS controls, lighting system upgrades, energy brokerage, roofing and building envelope assessments, construction management, and more. At Mantis, our teams work across the full lifecycle of a facility-from planning and design to field execution and long-term asset management-across commercial and industrial portfolios, data centers, and complex mechanical systems.
Field Service Technician II – HVAC - TX Mitsubishi Electric Power Products, Inc.Field Service Technician II – HVAC - TXDallas, TXEducation & Experience: Associate degree in HVAC, Electrical, Electronics, or a related technical field with 2–5 years of experience troubleshooting and repairing HVAC or refrigeration systems—or equivalent education and experience. MEPPI's Service Center Division (SCD) is seeking a skilled and service-oriented Field Service Technician – IT Cooling to support and maintain our advanced IT Cooling products and electro-mechanical equipment.
Fiber Technician MRINetwork JobsFiber TechnicianFort Worth, TexasKeywords: Fiber Technician, Fiber Tester, Cable Technician, Fiber Helper, Entry-Level Fiber Tech, Dark Fiber Testing, OTDR Testing, Power Meter Testing, Fiber Optic Jobs, Data Center Technician, Low Voltage Cable Tech, Structured Cabling, Field Service Technician, Network Cable Tech, Travel Technician Jobs, Telecom Testing Jobs, Fiber Inspection, Fiber QA Technician, No Splicing Required, Fiber Network Testing, Cable Installer. Siter-Neubauer & Associates is currently conducting searches for Fiber Technicians or Cable Techs to assist with fiber testing (no splicing) at data centers across the U.S. This is a travel-based role with assignments that typically run up to two weeks at a time.
Field Service Technician 3 - Engine HOLT CATField Service Technician 3 - EngineIRVING, TEXASThis position is responsible for performing high-quality field service repair work on industrial or natural gas engines in order to respond to customer needs in a positive, caring, and timely manner and to ensure maximum value for work performed. Prepares and completes all job related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job.
HVAC Service Technician Thirty Madison VenturesHVAC Service TechnicianGrapevine, TX$25–$30 / hourJoin a growing HVAC company serving the Dallas-Fort Worth area, with a strong and expanding commercial book of business anchored by a major rooftop unit account. This is a great opportunity for a well-rounded tech who wants steady, year-round work across both commercial and residential jobs, with room to grow as the business scales.
Low Voltage Service Technician Gaylor ElectricLow Voltage Service TechnicianDallas, TXScope of Work: The Service Technician performs service installations, alterations, additions, and/or repairs of electrical systems, conductors, and associated materials and equipment within the residential, commercial, and industrial electrical industry. This role involves interpreting electrical construction drawings, terminating cables, installing and troubleshooting control wiring, and maintaining tools, equipment, and vehicles.
Service Technician - 10:30am-7:00pm - Fort Worth, TX Bruckner's Truck & EquipmentService Technician - 10:30am-7:00pm - Fort Worth, TXFort Worth, TexasKeywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR . This position will also perform disassembly, repair, and reassembly of truck engines, transmissions, carrier assemblies, clutches, brakes, electrical systems, and any other truck or related equipment adjustment/repairs.
Tire Service Technician - Eldorado Pkwy Discount TireTire Service Technician - Eldorado PkwyMckinney, TXDiscount Tire was founded in 1960 by Bruce T. Halle in Ann Arbor, Michigan, with a single store, an inventory of only six tires, and a promise to treat people right. Today, it is the nation’s largest independent tire and wheel retailer with over 1,200 stores across 40 states and over 31,000 employees.
HVAC Service Technicians ModigentHVAC Service TechniciansIrving, TexasService Tech I - The Service Technician I is often a recent graduate from an accredited trade school entering the field of HVAC service and repair and/or has 3 or less years of experience in the field. Service Tech II - The Service Technician II has required accreditations including EPA certification and generally has more than 3 years’ experience in the field of HVAC service and repair.
Field Service Technician III Kirby CorpField Service Technician IIIDallas, TXResponsible for diagnosing problems and performing complex and/or major mechanical, electrical, hydraulic, and pneumatic repairs at the customer's place of business on customer''s equipment including refractory units, coil tubing units, pumping units, and other oil field equipment. Lead and perform generator commissioning activities, including verifying system installation, conducting performance tests, and ensuring all components function according to design specifications.