323 Results for

2nd Shift Manufacturing Jobs in Redondo Beach, WA

Jobs

Kent, WA13 days ago

As the largest wire manufacturer in the Western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications, and industrial applications. Our belief in our people and their capabilities drives our decentralized structure, which fosters entrepreneurship — a key driver of our long-term growth.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Preferred Qualifications: Hands on experience with relevant aerospace hardware manufacturing processes (i.e. castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, tight tolerance assembly, leak testing, final acceptance testing of integrated hardware).

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Preferred Qualifications: Hands on experience with relevant aerospace hardware manufacturing processes (i.e. castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, tight tolerance assembly, leak testing, final acceptance testing of integrated hardware).

Seattle, WA30+ days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. Required SkillS: * Bachelor, Master or Doctorate of Science degree required from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry is required.

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. Strong communication and interpersonal skills, both written and verbal, with the ability to communicate effectively with a diverse community of customers and employees at all levels.

Bonney Lake, WA16 days ago

$91,500–$110,000 Per Year
Full-time
Employee

Coordinate and communicate production activities with external customers and internal departments including logistics, engineering, and production management (to include management on other shifts). With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Hands on experience in hardware manufacturing (i.e. tight tolerance assembly, leak testing, final acceptance testing of integrated hardware, and castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, Manufacturing Execution Systems/Software).

Auburn, WA18 days ago

$25.50–$28.50 Per Hour
Full-time
Employee

Monitor line staffing, and recommend plans to adjust staffing levels daily, to achieve established goals for each line of responsibility to ensure production levels are met while controlling manpower costs. Complies with and enforces all company safety policies to ensure accident free facility, which includes, but is not limited to, assisting in identifying and correcting machine and work area safety issues, as well as conducting accident investigations as required.

Kent, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Crystal Mountain, WA30+ days ago

$27.78–$32.51 Per Hour
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Crystal Mountain, WA18 days ago

$23.63–$29.58 Per Hour
Full-time
Employee

Bonney Lake, WA16 days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Bonney Lake, WA30+ days ago

$21.75–$25.75 Per Hour
Full-time
Employee

Bonney Lake, WA30+ days ago

$21.75–$25.75 Per Hour
Full-time
Employee

Bonney Lake, WA30+ days ago

$21.75–$25.75 Per Hour
Full-time
Employee

Renton, WA30+ days ago

Full-time
Employee

Auburn, WA26 days ago

$20–$24 Per Hour
Full-time
Employee

For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions. In all actions, supports Sonaca North America’s Quality Policy, Mission Statement and other Company policies and procedures by supporting our commitment to total customer satisfaction, quality products and services, lean processes, continuous improvement, on-time delivery, safety, teaming, individual accountability and respect for people.

Bonney Lake, WA30+ days ago

$21.75–$25.75 Per Hour
Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to takt time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Renton, WA16 days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Renton, WA9 days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Tacoma, WA30+ days ago

$23–$23.01 Per Hour
Full-time
Employee

AutoForce, a division of U.S. Venture, Inc., brings together more than 100 years of experience as an industry leader in the distribution of tires, undercar parts, and lubricants to independent tire retailers, auto repair shops, and automotive dealerships. Load, unload, stock tires and auto parts in a fast-paced warehouse environment using industrial vehicles such as a forklift or picker equipment.

Kirkland, WA23 days ago

Shifts may vary, depending on program needs - Able to stand for long periods of time and perform repetitive assembly operations - Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift at least 25 lbs. - Process Compliance: Execute work in accordance with established procedures, specifications, and work instructions - Non-Conformance Documentation: Identify and document non-conformities as required to ensure traceability and corrective action.

Renton, WA30+ days ago

Full-time
Employee

Auburn, WA18 days ago

$22.50–$23.50 Per Hour
Full-time
Employee

If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees.

Kent, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Additional support will be in assisting department Paint Assistants with guidance on laying parts out on screens, transport loaded screens in and out of paint booths/ovens, and sand parts.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.

Woodmont Beach, WA19 days ago

Full-time
Employee

Woodmont Beach, WA11 days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Woodmont Beach, WA15 days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA19 days ago

Full-time
Employee

Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA11 days ago

Full-time
Employee

Redmond, WA16 days ago

$27.40–$49.04 Per Hour

Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . L3Harris announced (https://www.l3harris.com/newsroom/press-release/2026/01/l3harris-sell-majority-stake-space-propulsion-power-business-ae) on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business.

Bonney Lake, WA30+ days ago

Full-time
Employee

Pay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Sumner, WA18 days ago

$25–$45 Per Hour
Full-time
Employee

We are seeking a reliable and motivated Night Shift Foreman to lead and support shop floor operations in a fast-paced aerospace manufacturing environment. This role is responsible for ensuring production starts on time each shift, machines are running efficiently, and the shop floor is organized, safe, and productive.

Redmond, WA30+ days ago

Full-time
Employee

We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Through our global dealer, parts and service network and true value-creating digital solutions, we deliver best-in-class lifecycle support, helping customers maximize return on investment.

Woodmont Beach, WA11 days ago

Full-time
Employee

l learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Renton, WA9 days ago

Full-time
Employee

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.

Redmond, WA30+ days ago

Full-time
Employee

Algona, WA17 days ago

Full-time
Employee

During the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of UTZ Quality Foods is looking to grow our loyal, career driven, and customer focused team, and are currently recruiting for a Packer to work 2nd Shift for our manufacturing facility in Algona, WA.

Auburn, WA26 days ago

$20–$24 Per Hour
Full-time
Employee

In all actions, supports the Quality Policy, Mission Statement and other policies and procedures by supporting our commitment to total customer satisfaction, quality products and services, lean processes, continuous improvement, on-time delivery, safety, teaming, individual accountability and respect for people. Our Assemblers primary functions would be drilling and deburring parts to ready for assembly, assembly of component parts including attaching parts together by installing ground studs, attaching nutplates or bonding.

Redmond, WA19 days ago

Full-time
Employee

The Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world.

Auburn, WA11 days ago

$20–$23 Per Hour
Full-time
Employee

In all actions, supports Sonaca North America’s Quality Policy, Mission Statement and other Company policies and procedures by supporting our commitment to total customer satisfaction, quality products and services, lean processes, continuous improvement, on-time delivery, safety, teaming, individual accountability and respect for people. Sonaca North Americadoes not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings.

Seattle, WA30+ days ago

Full-time
Employee

Kent, WA19 days ago

$77,968–$130,228 Per Year
Full-time
Employee

Hexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.

Redmond, WA16 days ago

$22.83–$42.54 Per Hour

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Preferred Qualifications: Hands on experience with relevant aerospace hardware manufacturing processes (i.e. castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, tight tolerance assembly, leak testing, final acceptance testing of integrated hardware).

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift Manufacturing job opportunities. Plus, receive relevant job recommendations in your inbox.

2nd Shift Manufacturing Jobs in Redondo Beach, WA

Jobs

Machine Operator 2nd Shift - Davis Wire Corporation - Kent, WADavis Wire

Additive Manufacturing Machine Technician (2nd Shift)Blue Origin LLC

New Glenn B-shift Manufacturing EngineerBlue Origin LLC

New Glenn C-shift Manufacturing EngineerBlue Origin LLC

Manufacturing Engineer 2Spectraforce Technologies Inc.

Production Supervisor 2nd ShiftSekisui Aerospace

Production Supervisor, 2nd ShiftSekisui Aerospace

Manufacturing Engineer - Rocket Engines Valves (Weekend Shift)Blue Origin LLC

Lead Loading, Shipping, and Receiving Associate 2nd ShiftCornerstone Building Brands, Inc.

Aerospace Cadmium Assistant - 2nd ShiftHytek Finishes

Advanced Machinist - 2nd ShiftParker Hannifin Corporation

Machinist Skilled - 2nd ShiftParker Hannifin Corporation

QA Inspector II - 2nd ShiftSekisui Aerospace

Aerospace Packager - 2nd ShiftHytek Finishes

Trimmer I, 2nd ShiftSekisui Aerospace

Breakout I, 2nd ShiftSekisui Aerospace

Laminator I, 2nd ShiftSekisui Aerospace

Laminator I - 2nd ShiftSekisui Aerospace

Press Brake - 2nd ShiftSonaca North America

Assembler I, 2nd ShiftSekisui Aerospace

Aerospace Assembler I - 2nd ShiftSekisui Aerospace

Aerospace Assembler II - 2nd ShiftSekisui Aerospace

Warehouse Material Handler - 2nd ShiftU.S. Venture, Inc

Manufacturing Assembly Technician III (2nd Shift), Amazon LeoAmazon

Paint Prepper II - 2nd ShiftSekisui Aerospace

End of Line Inspector (Quality Technician)-2nd shiftCornerstone Building Brands, Inc.

Aerospance Painter - 2nd ShiftHytek Finishes

Aerospace Chrome Assistant - 2nd ShiftHytek Finishes

Aerospace Cadmium Masker - 2nd ShiftHytek Finishes

Aerospace Painter - 2nd ShiftHytek Finishes

Manufacturing Engineer 3Spectraforce Technologies Inc.

Aerospace Titanium Cadmium Assistant - 2nd ShiftHytek Finishes

Aerospace Anodize Operator - 2nd ShiftHytek Finishes

Aerospace Titanium-Cadmium Assistant - 2nd ShiftHytek Finishes

Manufacturing Technician C - 2nd ShiftL3Harris

Painter II, 2nd ShiftSekisui Aerospace

Aerospace Manufacturing - IMMEDIATELY HIRING NIGHT SHIFT FOREMANQuality Stamping and Machining, Inc

Manufacturing Engineer IITerex Corporation

Aerospace Polish Operator - 1st or 2nd ShiftHytek Finishes

Advanced Composites Manufacturing Lead - 1st ShiftSekisui Aerospace

Manufacturing Engineer ITerex Corporation

Packer - 2nd ShiftUtz Brands

Assembly - 2nd ShiftSonaca North America

Manufacturing Engineer III/Sr. - Design for AutomationTerex Corporation

Warehouse Coordinator 2nd shift Monday - Friday 3:00PM - 12:00AMAtkore International

Inventory Clerk - 2nd ShiftSonaca North America

Machinist Weekday 2nd ShiftBlue Origin LLC

Manufacturing Engineer 3Hexcel Corporation

Manufacturing Technician B - 2nd ShiftL3Harris

New Glenn Manufacturing Engineer IIIBlue Origin LLC

Resume Resources