Manufacturing Technician - Albumin Filling (B315 Filling) Grifols SAManufacturing Technician - Albumin Filling (B315 Filling)Los Angeles, CA$21–$22 / hourResponsible for performing the following daily tasks: cleaning/ sanitizing aseptic and non-aseptic processing areas, preparing and sterilizing filling and freeze-drying components (such as vials, stoppers, and filling assemblies), and performing aseptic fills. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Manufacturing Technician - IGIV Bulk Grifols SAManufacturing Technician - IGIV BulkLos Angeles, CA$21.50–$22 / hourResponsible for performing the following daily tasks: cleaning/ sanitizing aseptic and non-aseptic processing areas, preparing and sterilizing filling and freeze-drying components (such as vials, stoppers, and filling assemblies), and performing aseptic fills. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Senior Electro-Mechanical Manufacturing Engineer ANDURIL INDUSTRIESSenior Electro-Mechanical Manufacturing EngineerIrvine, CA$146,000–$194,000 / yearThis responsibility includes everything in the manufacturing value-chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and work documentation associated with the hardware that the Manufacturing Engineer owns. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources.
Mechanical Technician 2 (Manufacturing Technician 2) PROLIM Global CorporationMechanical Technician 2 (Manufacturing Technician 2)California, CA$34–$38 / hourAs a Mechanical Technician 2, you will support manufacturing operations by assembling, testing, and maintaining mechanical components and subassemblies in a fast-paced production environment. This team designs and manufactures critical spacecraft components used in satellites, including panels, structures, solar arrays, and antenna systems.
Propulsion Technician - Raptor Chamber & Nozzle Assembly & Final Assembly, Level 4/5 - 2nd Shift SpaceXPropulsion Technician - Raptor Chamber & Nozzle Assembly & Final Assembly, Level 4/5 - 2nd ShiftHawthorne, CA$36–$43 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Punch Press Operator - 2nd Shift Precision Castparts CorpPunch Press Operator - 2nd ShiftIrvine, CA$19.50–$29.50 / hourLocation Profile: Headquartered in Irvine, CA, Shur-Lok manufactures fastening systems with superior locking devices for critical requirements including engine module assembly, structural assembly, rotor blade attachment, and aircraft engine shaft and spindle applications. Business Profile: PCC Fasteners offers comprehensive product lines that cover virtually every aerospace fastening application, we produce fasteners, precision components, tooling, and engineered system solutions for the automotive, defense, industrial machinery, and other performance-driven markets.
Fastener Assembly - 2nd Shift Precision Castparts CorpFastener Assembly - 2nd ShiftIrvine, CA$19.50–$29.50 / hourLocation Profile: Headquartered in Irvine, CA, Shur-Lok manufactures fastening systems with superior locking devices for critical requirements including engine module assembly, structural assembly, rotor blade attachment, and aircraft engine shaft and spindle applications. Business Profile: PCC Fasteners offers comprehensive product lines that cover virtually every aerospace fastening application, we produce fasteners, precision components, tooling, and engineered system solutions for the automotive, defense, industrial machinery, and other performance-driven markets.
Manufacturing Operator BiorayManufacturing OperatorIrvine, CAThis role owns the transformation of raw ingredients into finished product through precise execution of batching, strict adherence to SOPs and BPRs, and disciplined control of the production environment. As BIORAY scales, the reliability of batching, cleanliness of the workspace, and uptime of equipment directly impact output, quality, and customer trust.
Manufacturing Engineer (Raptor Combustion Devices Machining) SpaceXManufacturing Engineer (Raptor Combustion Devices Machining)Hawthorne, CATo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Identify, develop, and implement machining processes to help solve for engine cost, quality, and production rate – specifically focused on valve, turbopump, thrust chamber or injector hardware.
Manufacturing Engineer (Raptor Turbomachinery Machining) SpaceXManufacturing Engineer (Raptor Turbomachinery Machining)Hawthorne, CA$100,000–$115,000 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Identify, develop, and implement machining processes to help solve for engine cost, quality, and production rate – specifically focused on valve, turbopump, thrust chamber or injector hardware.
Manufacturing Engineer (Raptor Valves Machining) SpaceXManufacturing Engineer (Raptor Valves Machining)Hawthorne, CA$100,000–$130,000 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Identify, develop, and implement machining processes to help solve for engine cost, quality, and production rate – specifically focused on valve, turbopump, thrust chamber or injector hardware.
Manufacturing Design Engineer Neros TechnologiesManufacturing Design EngineerTorrance, CA$112,500–$157,000 / yearExperience working closely with cross-functional teams including Product Design, Test Engineering, Quality, Supply Chain, and Operations to deliver successful product launches. 2+ years of experience developing and scaling manufacturing processes for complex electro-mechanical products in consumer electronics, robotics, aerospace, automotive, or similar industries.
Manufacturing Engineer (Raptor Valves Machining) Space Exploration TechnologiesManufacturing Engineer (Raptor Valves Machining)Hawthorne, CA$100,000–$130,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RESPONSIBILITIES: Identify, develop, and implement machining processes to help solve for engine cost, quality, and production rate - specifically focused on valve, turbopump, thrust chamber or injector hardware.
Manufacturing Systems Engineer Neros TechnologiesManufacturing Systems EngineerTorrance, CA$183,500–$257,000 / yearYou will be the technical and functional owner of the platform that drives every build on our floor: work instructions, process plans, nonconformance tracking, and the data that flows between the shop floor and the rest of the business. Direct experience administering or configuring an MES platform (Manufacturo, iBase-t Solumina, Tulip, Siemens Opcenter, or similar); Manufacturo experience is a strong plus.
Manufacturing Automation Engineer Actalent IncManufacturing Automation EngineerIrvine, CA$120,000–$150,000 / yearWe are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing winner for both client and talent service. This role will partner closely with automation vendors and internal engineering teams to develop scalable manufacturing solutions for a complex, precision medical device.
Manufacturing Engineer (Raptor Combustion Devices Machining) Space Exploration TechnologiesManufacturing Engineer (Raptor Combustion Devices Machining)Hawthorne, CA$100,000–$117,500 / yearRESPONSIBILITIES: Identify, develop, and implement machining processes to help solve for engine cost, quality, and production rate - specifically focused on valve, turbopump, thrust chamber or injector hardware. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
NewManager of Manufacturing Product Owner - Millennium Space Systems BoeingManager of Manufacturing Product Owner - Millennium Space SystemsEl Segundo, California$151,300–$222,500 / yearMillennium Space Systems also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Candidates must have at least one year of experience in a leadership role (team leader, temp manager, large scale cross functional project/program management, or formal manager experience) OR have completed the Boeing internal course “Exploring Leadership".
Fabrication Technician I Georg Fischer AGFabrication Technician IIrvine, CA$22–$25 / hourAbility to safely and effectively perform the essential functions of the position in a work environment that may include exposure to noise, dust, chemicals, sharp objects, moving or rotating mechanical equipment, and varying or uncontrolled temperatures. This role may cross-train in several fabrication areas but will focus on plastic and use specialized tools and equipment to cut, weld, bend, and finish plastic materials with a high degree of precision.
Manufacturing Engineer Vital LyfeManufacturing EngineerLos Angeles, CaliforniaVital Lyfe is a tech company redefining water autonomy through innovation — creating a new category of personal water-making technology built to scale where infrastructure can’t. Collaborate with procurement, quality, test, integration teams and external vendors/suppliers to ensure smooth scale-up & ramp-out of manufacturing.
Manufacturing Engineer II/Senior - Machining Rocket Lab USAManufacturing Engineer II/Senior - MachiningLong Beach, CA$100,000–$155,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.