255 Results for

2nd Shift Production Jobs in Chelsea, MA

Jobs

New!

Brockton, MAToday

$30–$35 Per Hour

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Founded decades ago and based in Brockton, MA, with additional operations supporting large-scale food production, they are a leading food manufacturing and packaging organization focused on quality, safety, and operational excellence.

New!

Brockton, MAToday

$34–$39 Per Hour

Marlborough, MA10 days ago

Full-time
Employee

The Batch Processing Operator position is responsible for ensuring that the correct amounts of good quality raw materials are used in the preparation of our products, in a timely manner for our packaging lines. High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Marlborough, MA10 days ago

$70,000–$85,000 Per Year
Full-time
Employee

High school diploma or general education degree (GED), one year certificate from college or technical school, or two to four years related experience and/or training; or equivalent combination of education and experience. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

Marlborough, MA10 days ago

Full-time
Employee

EDUCATION and/or EXPERIENCE: High School diploma or General Education Degree (GED) equivalent ; and up to one month to three month related experience or training; or equivalent combination of education and experience. I understand Kens Foods will not sponsor applicants for work visas.*Your application was successfully sent!

New!

Devens, MA1 day ago

$25.70–$25.70

The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. They are responsible for unloading paper rolls from trucks and railcars, stacking roll stock, maintaining an organized workspace, and loading rolls into industrial machines.

New!

Boston, MA3 days ago

$75,000–$95,000

Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs.

New!

Wilmington, MA1 day ago

As a Plant Operations Supervisor, you will be responsible for assisting the Plant Manager in managing total plant operations and delivering superior customer satisfaction by driving results and exceeding expectations in the key areas of safety, service, quality and cost. Individuals fraudulently misrepresenting themselves as Brambles or CHEP representatives have scheduled interviews and offered fraudulent employment opportunities with the intent to commit identity theft or solicit money.

New!

Woonsocket, RI3 days ago

$16.49–$16.49 Per Hour

Use equipment such as shrink-wrap machine, paper cutter, hole drill, bindery equipment, jogger, tape machine, stackers, electric stapler, scales, etc. Prior experience in print/copy center, mailroom, document imaging/scanning, or production/operations support.

New!

Wilmington, MAToday

$69,500–$129,500 Per Year

Develop unique solutions to manufacturing problems by working closely with other Operations functions including Supply Chain, Manufacturing Engineering, Quality, and technical personnel on other programs. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Andover, MA10 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. Qualifications You Must Have: * Typically requires a Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering.

Andover, MA10 days ago

Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion. * Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost.

Hudson, NH14 days ago

Full-time
Employee

You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.

New!

Boston, MA5 days ago

Full-time
Employee

Andover, MA11 days ago

$74–$77 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • CMM programming experience for complex workpieces typically requiring 4+ axis machining centers • Demonstrated working knowledge of Creo CAD Software • Process familiarity with paint, plating, and structural assembly • Results-oriented focus on past projects to evaluate success • Demonstrated hands-on mechanical aptitude • Strong organization skills with ability to manage multiple tasks simultaneously • Ability to work individually to support team/department success • Excellent written, verbal, visual, and graphical communication skills • Possess excellent judgment and professional maturity • Knowledge and ability to apply CORE principles and technique. Qualifications You Must Have: • Typically requires a Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering • 5+ years of relevant experience in a similar field • Knowledge of CMM programming and workpiece holding and manual inspection methodology • 5+ years correctly interpreting engineering drawings, including ASME Y14.5 Geometric Dimensions and Tolerances as well as typical government and industry specifications • The ability to obtain and maintain a US security clearance.

Lowell, MA10 days ago

$20–$20 Per Hour

Inspect and ensure that all equipment is calibrated and in working order; balances/scales, pipettes, mediaclave, water purification systems, etc. Documents lot numbers, calibration and serial numbers of all equipment used as well as any pre-fill QC; pH, temperature, water resistivity, TOC levels, etc.

Andover, MA11 days ago

$65–$68 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • 5 Axis CNC programming experience • Competency in Siemens NX and/or Creo for CAD and CAM • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines • GD&T certification • Strong organizational and time management skills • Ability to work in a team setting as well as individually • Self-motivated and results oriented • Excellent written and verbal communication skills . * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations.

New!

Marlborough, MAToday

$29–$36 Per Hour

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Design and assemble electrical and electronic systems and prototypes according to engineering data and knowledge of electrical principles, using hand tools and measuring instruments.

Andover, MA11 days ago

$90–$95 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • 5 Axis CNC programming experience • Competency in NX CAM supporting medium to complex CNC programs • Demonstrated working knowledge of Creo CAD/CAM Software • Process familiarity with paint, plating, and structural assembly • Innovative mindset for continuous improvement keeping pace with advancements in technology • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines • GD&T certification • Strong organization skills with ability to manage multiple tasks simultaneously • Ability to work in a team setting as well as individually • Self-motivated and results oriented • Excellent written and verbal communication skills • Knowledge and ability to apply CORE principles and techniques . * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations.

New!

Wilmington, MAToday

$110,500–$205,000 Per Year

Proactively align manufacturing and facility planning from proposal through delivery, leading cross‑functional teams to optimize space for development and production programs byIdentifying required square footage, specific areas, and schedules for those spaces. OSHA electrical safety program implementation and management experience is a plus Demonstrated management/leadership experience in Manufacturing Engineering, Facilities Planning/Engineering, Manufacturing Management, Project/Program Management, and/or Construction Management.

Andover, MA10 days ago

Nashua, NH7 days ago

Building on over four decades of leadership and experience, Wakefield Thermal designs, manufactures, and sells thermal management products that remove excess heat generated by electronic components. Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.

Hudson, NH14 days ago

Full-time
Employee

Experience doing root-cause analysis and complex debug activities on motherboard platforms (Intel server motherboard platforms is preferred). This technical role calls for a person with deep expertise in hardware-level diagnostics, as well as the vision to drive process improvement and test strategy innovation.

Andover, MA10 days ago

$70–$79 Per Hour
Temporary
Contractor
Full-time

Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion. • Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost.

Assinippi, MA26 days ago

$20–$30 Per Hour
Full-time
Employee

Our products include cream applicators, tablet applicators, suppository applicators, and glass and plastic dropper assemblies used in critical healthcare applications. This is a great opportunity for someone who enjoys hands-on inspection work, takes pride in attention to detail, and wants to contribute to products that directly support patient care.

Weymouth, MA18 days ago

$120,000–$150,000 Per Year
Full-time
Employee

Write and analyze test plans, execute tests and evaluate test results to demonstrate the design meets specifications with high quality. Develop assembly processes and instructions using lean principles to safely reduce waste, increase efficiency, and improve product quality.

New!

Hudson, NH3 days ago

$31–$49

New!

Hudson, NH3 days ago

$45–$58 Per Hour
Full-time
Employee

This role will participate and/or lead failure analysis in manufacturing and for field failures, develop troubleshooting & repair schemes, develop manufacturing process controls and documentation, interface with manufacturing and quality personnel to train and transfer processes & knowledge for successful volume production launches, and engage with suppliers as needed to drive improvement and implement process controls. This is a hands-on role that works with a team of quality engineers, technicians and inspectors that are engaged through the entire life cycle of product, starting during development, continuing with transitioning of product to manufacturing, and then supporting the continuous manufacture of product.

New!

Lawrence, MA4 days ago

Handle consumable materials with precision under guidance of Group Leaders or trainers. Operate in cleanroom environments following contamination control protocols.

New!

Bedford, MA5 days ago

Support engineering technical and technical management processes associated with version/configuration control, to include: a) Requirements definition and analysis; b) Architecture design, implementation, integration, verification, validation, transition, decision analysis, technical planning, technical assessment; c) Requirements management, risk management, configuration management, technical data management, and interface management. Participate in integrated logistics support efforts, provisioning and source coding, maintenance data collection, technical order management, configuration management, evaluation of quality deficiency reports, and/or identification of alternate sources of supply for diminishing manufacturing/materiel sources preferred.

Andover, MA12 days ago

$70–$95 Per Hour
Temporary
Contractor
Full-time

This role is centered around developing and optimizing CNC programs, supporting inspection through CMM, and partnering with production teams to ensure high-quality, small-part manufacturing. US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions.

Peabody, MA30+ days ago

$35–$40 Per Hour

The ideal candidate will lead a team of assemblers and technicians, coordinate production schedules, and drive continuous improvement across all manufacturing processes. Maintain a safe and clean work environment, ensuring all team members follow safety protocols and wear proper PPE .

Salem, NH27 days ago

Frequent (70% -80% of a 8-hour day) grasping of small hand tools The amount of time spent doing any of the above can change upon work demand. Experience & Required Skills: Production AssemblerMinimum of 2 years experience in a production/assembly environment.

Hudson, New Hampshire12 days ago

$19.80–$22 Per Hour

We're working with a small, well‑established manufacturing company in Hudson that's looking for reliable, hands‑on team players to join their second shift crew. If you like staying busy, learning new skills, and being part of a tight‑knit team where your work truly matters, this could be a great fit!

Chelsea, MA21 days ago

$70,000–$80,000 Per Year

SUMMARY: Kayem’s production supervisor is responsible for managing and coordinating the work of production teams to ensure efficient manufacturing operations and quality food production in a safe and cost-effective way to achieve performance targets. Communicates effectively with production teams, management, and cross-functional departments including maintenance, quality assurance, and safety teams.

Tyngsborough, MA20 days ago

Cannabis Production Technicians are directly involved in manufacturing our products from the initial stages to final sale-ready units that will be distributed to dispensaries throughout the state and ultimately into the hands of our customers who enjoy our top-of-the-line branded products. The company is very passionate about producing world-class marketing, high quality, innovative products, delivering unprecedented customer experiences, having cutting-edge operations, and curating an amazing company culture & thriving work environment.

Chelsea, MA14 days ago

Well over 100 years later, we are the largest meat processor in New England and still pushing our craft to the next level – tweaking recipes to have the perfect flavors and extending our expertise into delicious new areas and collaborations – such as Kayem’s Night Shift Brewing Small Batch Beer Brats. Kayem Foods is a family owned and operated craft meat business that has been making New England’s favorite franks, sausages, and prepared meats in Chelsea, Mass.

Peabody, MA24 days ago

Full-time

TMC is the leader in precision floor vibration isolation technology serving major research centers, OEM and end-user semiconductor manufacturers, university research laboratories, drug discovery companies, and nanotechnology labs. The successful candidate should have 3-5 years prior experience and be familiar with the safe use of basic hand and power tools, such as grinders and deburring equipment along with the safe use of hoists and pallett jacks.

Newton, MA30+ days ago

$26–$34 Per Hour

We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.

Waltham, MA30+ days ago

$26–$34 Per Hour

Framingham, MA30+ days ago

$26–$34 Per Hour

Lexington, MA30+ days ago

Nearby Indianapolis is home to professional and college sports teams, the Indy 500, a growing art community and the world's largest children's museum--to name just a few reasons why this area is a great place to live. Known for its pivotal role in the American Revolution, Lexington offers visitors and residents alike a blend of historical landmarks, modern amenities, and a strong sense of community pride.

Nashua, New Hampshire17 days ago

$19.80–$19.80 Per Hour

Operate production press (load/unload parts, use push‑button and dial controls). This is a contract‑to‑hire opportunity paying $19.80/hour, where employees will be cross‑trained in press operation and bonding.

Southboro, MA30+ days ago

$24.20–$26.40 Per Hour

Summary of Duties and Responsibilities:Test calibrates and repairs production machines and related subassemblies to written and oral specifications in a timely fashion. Timely and accurate testing and calibration of all electronic subassemblies and must clearly document results.

Westborough, MA30+ days ago

Collaborate with Project Managers (PMs) to analyze customer ECNs and ensure effective implementation to the production floor through proper use of the Engineering Change Order (ECO) process, including reviewing and communicating impacts of any changes (e.g., financial, inventory, WIP, open supplier orders, etc.), as it pertains to Quality. Collaborate with all internal groups and customers to help determine root cause of customer issues, Complaints, and CAPAs using various techniques including but not limited to Reenactment, PFMEA, Control Plans, Five Whys, Ishikawa (fishbone) Diagrams, Pareto Analysis, etc.

Milford, MA30+ days ago

$61,700–$75,600 Per Year

Required Skills/Abilities: + Minimum education requirements: high school diploma or equivalent with college level Chemistry degree or equivalent work experience. About this opportunity : As a Manufacturing Technician II, you'll be responsible for the implementation of assigned production operations working within defined production schedules in a cGMP environment.

Nashua, NH30+ days ago

Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety guidelines. Position requires cross functional collaboration with procurement, machining, weld, paint and quality departments to drive safety, meet quality and delivery requirements, and ensure efficiency to meet cost targets.

Westborough, MA30+ days ago

We are seeking a Quality Control Supervisor to lead an Incoming Inspection team in a precision manufacturing environment. Strong proficiency with precision measuring instruments (e.g., calipers, micrometers, gauges) .

Chelsea, MA30+ days ago

Job Summary:The Pallet Jack Operator may operate electric pallet jacks, and other powered industrial trucks to pick orders, load and unload trailers, put away products, transfer products, etc. Utilizes glad locks and chock blocks to secure trucks while they are unloaded and/or loaded to prevent early truck departure.

Manchester, NH30+ days ago

Full-time

Excellent communication skills with managers, employees and vendors while delivering status reports and performing maintenance and repair work, machinery installations or moves. Perform inspection of machine parts and castings utilizing various inspection techniques and equipment to assure functional performance according to drawing specifications.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift Production job opportunities. Plus, receive relevant job recommendations in your inbox.

2nd Shift Production Jobs in Chelsea, MA

Jobs

2nd Shift Maintenance Technician IIJobot

2nd Shift Maintenance LeadJobot

Batch Processing Operator - 2nd ShiftKen's Foods

Batch Processing Supervisor - 2nd ShiftKen's Foods

Machine Operator - 2nd ShiftKen's Foods

Clamp Roll Truck Driver- 2nd ShiftWestRock

Legal Administrative Assistant - 2nd shiftVaco LLC

Operations Supervisor - 2nd ShiftCHEP

Print Shop Clerk – 2nd Shift {169003}A-Line Staffing Solutions LLC

Specialist, Production PlanningL3Harris Technologies

Manufacturing Engineer II - 4th shiftButler Aerospace and Defense

Senior Manufacturing EngineerButler Aerospace and Defense

Manufacturing Engineer III (NH)GCR Professional Services

Manufacturing Engineer II (FL)GCR Professional Services

Senior Manufacturing Engineer, 1st ShiftThe Computer Merchant, LTD.

Production TechnicianNesco Resource

Manufacturing Engineer, 1st ShiftThe Computer Merchant, LTD.

Electrical Technician (Manufacturing)Jobot

Principal Manufacturing Engineer, 4th ShiftThe Computer Merchant, LTD.

Manager, Manufacturing Facilities Planning and ManagementL3Harris Technologies

Principal Manufacturing EngineerButler Aerospace and Defense

Manufacturing Engineer - Thermal SolutionsWakefield Thermal Solutions

Manufacturing Test Engineer (NH)GCR Professional Services

Senior Manufacturing EngineerUS Tech Solutions, Inc.

Quality InspectorEDA Staffing

Principal Electronics & Software EngineerElectroswitch

Quality EngineerVaco LLC

Quality Engineer III (NH)GCR Professional Services

Manufacturing TechnicianAxelon Services Corporation

Systems Engineer, SeniorDCS Corp

CNC Programmer – SMT / Precision Component Manufacturing DesignUS Tech Solutions, Inc.

Manufacturing Production Supervisor - 2nd ShiftJohnson Service Group

Production Assembler - 2nd ShiftApollo Professional Solutions

2nd Shift Production AssociateUltimate Staffing Services

2nd Shift Production SupervisorKayem Foods

Production Technician - MA (2nd Shift)Jeeter

Production Services- Grinder Operator - 2nd shiftKayem Foods

Production Welder 2nd shiftAMETEK, Inc

B Level Auto Technician, Post Production - 2nd ShiftCarvana

B Level Auto Mechanic, Post Production - 2nd ShiftCarvana

Mid-Level Auto Technician, Post Production - 2nd ShiftCarvana

Manufacturing Supervisor - 2nd Shift (2:00-10:30pm)Genezen

Manufacturing Associate 2nd ShiftUltimate Staffing Services

Manufacturing Technician I (2nd Shift) MarlboroughConnexion Systems + Engineering

Quality Inspector - EM PCBA (2nd Shift)The Panther Group

Manufacturing Technician II (2nd Shift)Nitto Denko Corp.

Manufacturing Engineer (2nd shift)Granite State Manufacturing

Quality Control Supervisor (2nd Shift)The Panther Group

Pallet Jack Operator (1st & 2nd Shifts available)Wicked Staffing Solutions

Inspector - 2nd ShiftGXO Government Services, LLC

Resume Resources