NewGlobal Head, Vaccine Chemistry, Manufacturing and Controls (CMC), Center for Vaccine Innovation and Access (CVIA) Program for Appropriate Technology in HealthGlobal Head, Vaccine Chemistry, Manufacturing and Controls (CMC), Center for Vaccine Innovation and Access (CVIA)Washington DCProvide strategic and technical guidance to CMC team members on project teams on process development, product analytics, formulation and fill, final manufacturing process and facility design and needs, and quality control thereof, investigational product supply and stability, as well as in vivo and in vitro safety and toxicity testing performed before and during the clinical development to demonstrate non-clinical safety and tolerability of candidate vaccine products. The Global Head of CMC is a member of the CVIA leadership team (CVIA LT) and is responsible for CVIA-wide business plan creation and implementation, change initiative leadership, talent management, and proactive partnership in developing comprehensive cross-disciplinary tactics and enabling exceptional execution through cross-functional collaboration.
Manufacturing Engineer III MW Industries, Inc.Manufacturing Engineer IIIBaltimore, MD$110,000–$135,000 / yearEvaluates process flow and plant layout recommending and implementing improvements and/or modifications in sequence of operations and equipment utilization in order to improve thru-put, reduce labor/manufacturing costs and improve safety. Manufacturing experience in lean and cell manufacturing, process improvement, and equipment development, equipment buy offs, direct equipment installations, daily support, and debug.
Manufacturing Technician I Meso Scale DiscoveryManufacturing Technician IRockville, MD$39,600–$57,500 / yearThis salary range represents a general guideline as MSD considers other factors when presenting an offer of employment, such as scope and responsibilities of the position, external market factors, and the candidate's knowledge, skills, abilities, education and experience. This may include the production of coated plates, chemical buffers, and biological diluents/reagents and/or assembled kits for customer order fulfillment.
Manufacturing Technician I Meso Scale Diagnostics LLCManufacturing Technician IGaithersburg, MD$39,600–$57,500 / yearThis salary range represents a general guideline as MSD considers other factors when presenting an offer of employment, such as scope and responsibilities of the position, external market factors, and the candidate's knowledge, skills, abilities, education and experience. This may include the production of coated plates, chemical buffers, and biological diluents/reagents and/or assembled kits for customer order fulfillment.
Manufacturing Test Engineer III Westinghouse Air Brake Technologies CorpManufacturing Test Engineer IIIGermantown, MD$79,300–$113,000 / yearAs a Manufacturing Test Engineer, you will work with a cross-functional Engineering team to develop and maintain tools, fixtures, and scripts to automate testing of various Industrial Electronics products at internal and external manufacturing and repair facilities. The salary rate for this role is currently $79300-113000 The actual salary offered to a candidate may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location.
Manufacturing Technician III Katalyst Healthcares & Life SciencesManufacturing Technician IIISparks, MDWe are seeking detail-oriented Scientific Operations/ Manufacturing Technician III to support the manufacturing and assembly of clinical and commercial products in a regulated laboratory environment. The ideal candidate is proactive, collaborative, and committed to maintaining operational excellence while adhering to Good Manufacturing Practices (GMP).
NewDesign for Manufacturing Lead - New Glenn Payload Accommodation Blue OriginDesign for Manufacturing Lead - New Glenn Payload AccommodationWashingtonThis position requires expertise in advanced manufacturing technologies, high-rate production, and design for reuse to drive meaningful design improvements that reduce production costs, simplify assembly and refurbishment processes, enable higher production rates, and extend hardware service life across multiple flights while maintaining or enhancing performance and reliability. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
NewGlobal Head, Vaccine Chemistry, Manufacturing and Controls (CMC), Center for Vaccine Innovation and Access (CVIA) PATHGlobal Head, Vaccine Chemistry, Manufacturing and Controls (CMC), Center for Vaccine Innovation and Access (CVIA)Washington DC, DC$320,000–$380,000 / yearProvide strategic and technical guidance to CMC team members on project teams on process development, product analytics, formulation and fill, final manufacturing process and facility design and needs, and quality control thereof, investigational product supply and stability, as well as in vivo and in vitro safety and toxicity testing performed before and during the clinical development to demonstrate non-clinical safety and tolerability of candidate vaccine products. The Global Head of CMC is a member of the CVIA leadership team (CVIA LT) and is responsible for CVIA-wide business plan creation and implementation, change initiative leadership, talent management, and proactive partnership in developing comprehensive cross-disciplinary tactics and enabling exceptional execution through cross-functional collaboration.
Manufacturing Technician III Karwell TechnologiesManufacturing Technician IIISparks, MDJob Overview We are seeking detail-oriented Scientific Operations/ Manufacturing Technician III to support the manufacturing and assembly of clinical and commercial products in a regulated laboratory environment. The ideal candidate is proactive, collaborative, and committed to maintaining operational excellence while adhering to Good Manufacturing Practices (GMP).
NPI Manufacturing Engineer Viavi SolutionsNPI Manufacturing EngineerGermantown, MDVIAVI employees are passionate about supporting customer success and we welcome people who bring their best every day to the company - to question, to collaborate and to push for solutions that will delight our customers. Summary: VIAVI (NASDAQ: VIAV) is a global provider of network test, monitoring and assurance solutions for telecommunications, cloud, enterprises, first responders, military, aerospace, and railway.
Senior Manager, Manufacturing IT Analog DevicesSenior Manager, Manufacturing ITUs, WashingtonDrive adoption of advanced analytics, machine learning, and emerging agentic AI capabilities to enable real-time decision-making, automate factory workflows (e.g., excursion triage, lot disposition, tool optimization), and improve yield, cycle time, and operational resiliency, aligned with ADI’s broader smart factory and AI strategy. Act as a key leader within the global Manufacturing IT organization, contributing to strategy, driving cross-site initiatives, and ensuring Camas both influences and adopts enterprise capabilities in areas such as automation, paperless manufacturing, data platforms, and AI.
Manufacturing Engineer Caltek StaffingManufacturing EngineerBaltimore, MD$110,000–$125,000 / yearThis position is highly visible within the organization and requires a hands-on engineer who is comfortable spending significant time on the manufacturing floor troubleshooting production issues, validating processes, and identifying opportunities for operational improvement. The Manufacturing Engineer III will support manufacturing operations by developing and implementing production methods, improving manufacturing processes, optimizing equipment utilization, and driving continuous improvement initiatives throughout the facility.
Engineer IV, Manufacturing Research Meso Scale DiscoveryEngineer IV, Manufacturing ResearchGaithersburg, MD$116,600–$177,800 / yearThe annual base salary for this position ranges from $116,600 to $177,800 This salary range represents a general guideline as MSD considers other factors when presenting an offer of employment, such as scope and responsibilities of the position, external market factors, and the candidate's knowledge, skills, abilities, education and experience. This position will work with a team of engineers and scientists to design and evaluate novel and high throughput manufacturing techniques for next generation diagnostic consumables, and eventually work closely with an internal automation team to scale up to high volume production.
Manufacturing Professional Training Lead / Staff Project Manager Northrop Grumman CorpManufacturing Professional Training Lead / Staff Project ManagerBaltimore, MD$126,400–$219,500 / yearThe Manufacturing Professional Training Lead owns the end‑to‑end learning strategy for all manufacturing support functions (industrial engineering, manufacturing engineering, production control, etc.) This role designs, delivers, and continuously improves professional‑development programs that enhance technical competence, safety awareness, and leadership capabilities, ensuring the workforce can meet current production demands and future growth initiatives. This training professional will collaborate with instructional design staff and subject matter experts to identify, plan, create, design, test, implement, deliver, support, and maintain effective and engaging learning opportunities and training activities through a variety of modalities (self-paced, in-person, mobile, virtual, video, job aids, microlearning, articles, etc.).
Senior Manufacturing Engineer- Composites Rocket Lab CorpSenior Manufacturing Engineer- CompositesMiddle River, MD$115,000–$144,000 / yearImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Manufacturing Product Manager - Modular MEP Systems Harris Contracting CompanyManufacturing Product Manager - Modular MEP SystemsUpper Marlboro, MD$88,849–$133,273 / yearAs one of the countrys leading mechanical contractors, Harris offers you the best of both worlds: the stability, resources and opportunities of a national company, and the team culture, creative spirit and customer loyalty of a local business. From stadiums to manufacturing facilities, power plants to hospitals, concert halls to classrooms, we handle projects of all sizes and complexity from multiple regional locations across the country.
Manufacturing Engineer II - Life Sciences Compagnie de Saint-GobainManufacturing Engineer II - Life SciencesGaithersburg, MD$81,500–$126,500 / yearThey allow access to information such as the characteristics of your terminal or certain personal data (IP addresses, navigation data on the Saint-Gobain site, etc.) for the following purposes: analysis and improvement of the user experience and/or our offer of content, products and services; audience measurement and analysis; interactions with social networks; display of advertising and personalized content. With a legacy dating back more than 350 years, Saint-Gobain offers employees the stability and security of a leading Global 500 corporation while operating like multiple small and agile start-ups, where entrepreneurial spirit, pioneering teamwork, and bold, forward-thinking ideas pave new paths.
Senior Manufacturing Engineer- Composites Rocket Lab CorporationSenior Manufacturing Engineer- CompositesMiddle River, MD$115,000–$144,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Blood Component Manufacturing Technician American Red Cross Blood ServicesBlood Component Manufacturing TechnicianBaltimore, MDAmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce. Good computer skills, ability to use a wide variety of programs and laboratory equipment, attention to detail, accurate documentation, and good decision-making skills.
Manufacturing Product Estimator - Modular MEP Systems Harris Contracting CompanyManufacturing Product Estimator - Modular MEP SystemsUpper Marlboro, MD$71,079–$106,618 / yearFrom stadiums to manufacturing facilities, power plants to hospitals, and concert halls to classrooms, we handle projects of all sizes and complexity across multiple regional locations throughout the country. As one of the countrys leading mechanical contractors, Harris offers the stability, resources, and opportunities of a national company along with the team culture, creative spirit, and customer loyalty of a local business.
Manufacturing Quality Engineer Polymer Concepts TechnologiesManufacturing Quality EngineerHanover, MarylandInteracts with representatives from a variety of functional areas, including design engineering, manufacturing engineering, purchasing and production and inspection personnel relating to products and programs (PFMEAs, Capability Studies, Risk Analysis and Measurement System Analysis) associated with Quality Assurance and Customer requirements. Essential Job Functions Reviews company and customer drawings, changes, inspections sheets, process procedures, test procedures, procurement documentation, quality manuals and inspection sheets ensuring company and customer quality and configuration requirements are met on assigned products, programs and projects.
Manufacturing Engineer I/II Rocket Lab CorporationManufacturing Engineer I/IIMiddle River, MD$77,000–$119,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Manufacturing Engineer Intern IDEXManufacturing Engineer InternLinthicum, MarylandUS Valve is seeking a motivated, hands-on Engineering Intern to support tooling design, production efficiency, and continuous improvement initiatives within our valve assembly operations. Support tooling and process improvement efforts across valve assembly operations by: Design and improve a seal-tapping tool to increase durability and usability.
Manager, Manufacturing Finance & Accounting Supernus PharmaceuticalsManager, Manufacturing Finance & AccountingRockville, MarylandWorks closely with the Company’s external CMOs, Supply Chain, Quality, Accounting, and Finance departments to appropriately manage the full cycle of inventory transactional processing and movements within the ERP (Enterprise Resource Planning system). This role is responsible for the full cycle manufacturing accounting process, including analyzing, and reconciling all production and inventory transactions related to external Contract Manufacturing Organizations (CMOs) and the company’s overall supply chain network.
Sr. Engineer Advanced Manufacturing Baltimore Aircoil CoSr. Engineer Advanced ManufacturingJessup, MD$124,500–$213,300 / yearAs part of the Americas Advanced Manufacturing Engineering department this position will have significant interaction with the Global and Americas Engineering Design and Manufacturing teams, the plant engineering teams, and the manufacturing plants. This includes all relevant operations aspects such as supply chain coordination, data flow processes, labor planning, training, and demand vs capacity and ramp up planning.
Manufacturing Technology Leader Amrize LtdManufacturing Technology LeaderMDRemoteABOUT THE ROLE: The Isocyanurate Technology Leader will develop and improve the polyisocyanurate insulation board manufacturing process in the ISO facilities within Amrize. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test.
Manufacturing Associate II Zp Group LlcManufacturing Associate IIGaithersburg, MD$52,000–$80,000 / yearThis position involves operating and maintaining downstream processing equipment, performing filtration and chromatography techniques and supporting production activities in a cleanroom environment. Qualifications of the Manufacturing Associate II: 3+ years of professional experience working in a GMP environment (Biotechnology or Pharmaceutical organization) with 1+ years of experience working in downstream manufacturing.
NewManufacturing Engineer II - Weld and Tank Fabrication Blue OriginManufacturing Engineer II - Weld and Tank FabricationWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team of engineers, technicians, and specialists, you will partner closely with design engineering, quality, and production teams to support the development and execution of manufacturing processes for tanks and composite overwrapped pressure vessel (COPV) hardware.
Manufacturing Engineer II - Electronics Fabrication Blue OriginManufacturing Engineer II - Electronics FabricationWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team, you will serve as a key technical interface between the production value stream and design engineering, ensuring smooth execution of hardware builds, rapid issue resolution, and continuous improvement across manufacturing processes.
Manufacturing Engineer II - Weld and Tank Blue OriginManufacturing Engineer II - Weld and TankWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As part of a highly collaborative team of engineers, technicians, and specialists, you will partner closely with design engineering, quality, and production teams to support the development and execution of manufacturing processes for tanks and composite overwrapped pressure vessel (COPV) hardware.
Senior Manufacturing Engineer- Composites Rocket Lab USASenior Manufacturing Engineer- CompositesMiddle River, Maryland$115,000–$144,000 / yearFull timeWhat You'll Get To Do:Identify, plan, and execute capital equipment, machine, and layout definitions to meet volume requirements including preparation of business casesDevelop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor sign-offsDesign, develop, and implement tooling and equipment for use in a production environment where required to achieve safety, quality, delivery and cost requirementsActively contribute to facility construction projects including requirements generation, design reviews and implementation supportContribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc. Oversee introduction and implementation of new products and product revisions as related to the Neutron launch vehicle composite structureLead problem containment and structured root cause & corrective action investigationsQuickly analyze and resolve manufacturing discrepancies and non-conformancesIntroduce automation where appropriate and ensure equipment data links directly to MRP and quality systemsIdentify risks and improvements to develop the manufacturing engineering department to meet company needsDevelop and mentor less experienced engineers and technicians dailyYou'll Bring These Qualifications:Bachelor's degree in mechanical, aerospace, or manufacturing engineering, or other technical degree.5
General Manufacturing Manager 2 Northrop Grumman CorpGeneral Manufacturing Manager 2Baltimore, MD$115,600–$173,400 / yearYou will be expected to work independently and collaboratively across organizations; manage the use of consumables to achieve budget targets; assign and manage represented employees to maximize efficiency and achieve target productivity yields; implement process improvements to improve affordability, quality, and schedule; and perform required SAP/MES transactions to manage operators and M&P specialists. Basic Qualifications: Bachelor's Degree with 8 years of experience in a Manufacturing, Production, or Engineering environment; Master's Degree with 6 years of experience in a Manufacturing, Production, or Engineering environment; 12 years of work experience in a Manufacturing, Production, or Engineering environment may be considered in lieu of degree requirement.
Manufacturing Project Manager Lockheed Martin CorpManufacturing Project ManagerSevern, MD$104,500–$184,115 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Managing Director, Manufacturing Operations Advisory And Business Development FTE Factory AdvisorsManaging Director, Manufacturing Operations Advisory And Business DevelopmentWashington, DCYou will help clients solve complex operational challenges while partnering across the broader Factory Transformation organization to integrate Digital Transformation and Approachable AI solutions where they create additional value. Proven success building, developing, and leading high-performing teams while coaching senior leaders and creating a culture of accountability, continuous improvement, and operational excellence.
NewManufacturing Technician I Actalent IncManufacturing Technician IRockville, MD$20–$21.63 / hourThe environment emphasizes collaboration, a supportive and structured training program, and is well-suited for individuals seeking to gain industry experience and develop new skills in laboratory manufacturing, with clear pathways for advancement within the group and across other departments. This role focuses on meeting production schedules through the preparation of coated plates, chemical buffers, biological diluents and reagents, and assembled kits for customer order fulfillment.
NewManufacturing Systems Engineering Manager 2 Northrop Grumman CorpManufacturing Systems Engineering Manager 2linthicum, MD$153,800–$230,800 / yearThe Manufacturing Systems Engineering Manager will form a team of systems manufacturing engineers that will be technically responsible for the development, optimization, and integration of all manufacturing systems throughout the entirety of the product lifecycle (i.e. design, analysis, procurement, fabrication, manufacturing, assembly, test, and shipment) with the intent of becoming a subject matter expert specific to a product. Northrop Grumman Mission Systems (NGMS) is seeking a Manufacturing Systems Engineering Manager to support the Distributed Systems Organization within Emerging Capabilities Development (ECD) group reporting to MNX Operations Director located in Linthicum, MD.
US Manufacturing VP Harmattan AIUS Manufacturing VPArlington, VAYou will work in close coordination with the Head of Manufacturing & Supply Chain and jointly develop and deploy the U.S. manufacturing strategy, ensuring strong alignment with Harmattan AI's global industrial roadmap while maintaining clear execution ownership in the U.S.ResponsibilitiesU.S. This role requires a hands‑on leader capable of structuring and scaling reliable industrial capacity in the United States, while coordinating closely with engineering, supply chain, and operations teams across multiple geographies.
Sr. Manager, Manufacturing Operations - Plasmids Catalent Pharma Solutions, Inc.Sr. Manager, Manufacturing Operations - PlasmidsHarmans, MD$165,000–$185,000 / yearMaster's degree in a scientific, engineering, or biotechnology field with 6+ years' experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related) OR Bachelor's degree in a scientific, engineering, or biotechnology field with 8-10+ years' experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related). Our FDA-licensed, state-of-the-art CGMP gene therapy campus in Harmans, MD-just minutes from BWI Airport-features EMA and FDA-approved manufacturing suites, fill/finish capabilities, labs, and warehousing to support Phase 3 through commercial production of advanced therapies, including AAV and other viral vector-based products.
Director, Manufacturing Ops Air, Land, Sea Textron IncDirector, Manufacturing Ops Air, Land, SeaHunt Valley, MD$173,900–$268,500 / yearStrategy Develop and execute roadmap to achieve long-term operational success Establish and execute capital planning for the manufacturing functions Develop and execute the manufacturing strategies in support of New Product Development (NPD) that satisfy near term demands of development programs and support long term vision of transitioning to a full rate production Process Communicate problem resolution to customers and senior management Analyze data, identify areas of opportunity, and implement improvements or corrective actions to address inefficiencies or quality issues Develop manufacturing and quality plans in support of Proposals and Awarded Programs Budgeting Develop manufacturing Cost Bids for proposals as well as initial baseline budgets and estimates to completes for awarded programs Manage direct and indirect budgets Tools Maintain and improve the Enterprise Quality Dashboard Maintain and improve the Warehouse Dashboard Maintain and improve the Planning Dashboard Maintain and improve the resource Load/Capacity System Qualifications Required Skills Bachelor's Degree in a discipline related to Supply Chain Management, Operations, Engineering, Science, or Mathematics. Six Sigma Green Belt, Black Belt certification preferred Strong organizational and time management skills, close attention to detail, and be able to effectively handle multiple priorities Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software Strong analytical skills and the ability to identify trends and establish proactive corrective actions.
Bioprocess Manufacturing Technician Katalyst Healthcares & Life SciencesBioprocess Manufacturing TechnicianRockville, MDThis position is responsible for operating manufacturing equipment, preparing process materials, executing batch records, monitoring critical process parameters, and ensuring compliance with quality and regulatory requirements throughout the manufacturing process. Associate or Bachelor's Degree in Biotechnology, Biology, Chemistry, Biochemistry, or related Life Science field preferred.
(706) Analyst 6 – Manufacturing Innovation Institutes Arlo Solutions(706) Analyst 6 – Manufacturing Innovation InstitutesArlington, VAThis key personnel position provides strategic program management, technology analysis, stakeholder engagement, and industrial base collaboration to strengthen the Manufacturing Innovation Institute (MII) network and accelerate the transition of advanced manufacturing technologies into operational defense capabilities. The Analyst 6 – Manufacturing Innovation Institutes (MII) serves as a senior advisor supporting the Department of War (DoW) Manufacturing Technology (ManTech) Program within the Office of the Under Secretary of War for Research & Engineering (OUSW(R&E)).
General Manufacturing Manager 1 Northrop Grumman CorpGeneral Manufacturing Manager 1Baltimore, MD$95,400–$143,200 / yearYou will work independently across organizations; manage the use of consumables to achieve budget targets; assign and manage represented EMS Operators and/or Ceramic Material and Process Specialist to maximize efficiency and achieve target productive yields; implement our process improvements to improve affordability, quality, and schedule; and perform required SAP/MES transactions to manage Operator and/or M&P Specialist. Basic Qualifications: Bachelor's Degree with 5 years of professional experience in a Manufacturing, Production or Engineering environment; Master's Degree with 3 years of experience in a Manufacturing, Production or Engineering environment; 9 years of work experience in a Manufacturing, Production or Engineering environment may be considered in lieu of degree.
Manufacturing & Supply Chain Professional (Mid-Senior Level) Hire Resolve.comManufacturing & Supply Chain Professional (Mid-Senior Level)MarylandThese roles are designed for mid- to senior-level professionals with a strong background across manufacturing, production, supply chain, operations, engineering, logistics, or quality functions, and offer a clear pathway toward senior leadership roles. Hire Resolve is assisting manufacturing and supply chain organizations in hiring experienced Manufacturing & Supply Chain Professionals to join their U.S.-based operations.
Manufacturing Engineer I/Ii Rocket Lab USAManufacturing Engineer I/IiMiddle River, MD$77,000–$119,000 / yearImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Manufacturing Engineer I/II Rocket Lab USAManufacturing Engineer I/IIMiddle River, MD$77,000–$119,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Bioprocess Manufacturing Technician Karwell TechnologiesBioprocess Manufacturing TechnicianRockville, MDThis position is responsible for operating manufacturing equipment, preparing process materials, executing batch records, monitoring critical process parameters, and ensuring compliance with quality and regulatory requirements throughout the manufacturing process. Associate or Bachelor's Degree in Biotechnology, Biology, Chemistry, Biochemistry, or related Life Science field preferred.
Manufacturing Test Engineer Saft America, Inc.Manufacturing Test EngineerCockeysville, Maryland$75,000–$105,000 / yearFull timeSince 2016, Saft is a wholly owned subsidiary of TotalEnergies, a global integrated energy company that produces and markets various forms of energy, including oil, biofuels, natural gas, green gases, renewables, and electricity. Test engineers should have in-depth knowledge of engineering and product design, a good eye for detail, and the ability to create simple yet thorough quality-check procedures to ensure the peak performance of a product.
Sr. Manager, Manufacturing Operations - Plasmids Catalent IncSr. Manager, Manufacturing Operations - PlasmidsMD$165,000–$185,000 / yearMaster's degree in a scientific, engineering, or biotechnology field with 6+ years' experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related) OR Bachelor's degree in a scientific, engineering, or biotechnology field with 8-10+ years' experience in GMP manufacturing operations within biologics/biopharmaceuticals (plasmids, vaccines, microbial fermentation, or related). Our FDA-licensed, state-of-the-art CGMP gene therapy campus in Harmans, MD-just minutes from BWI Airport-features EMA and FDA-approved manufacturing suites, fill/finish capabilities, labs, and warehousing to support Phase 3 through commercial production of advanced therapies, including AAV and other viral vector-based products.
NewSenior Manufacturing Engineer X Energy LLCSenior Manufacturing EngineerRockville, MD$115,000–$140,000 / yearDevelop innovative mechanical solutions to refine and deploy concepts, technologies, and designs associated with X-energy developed reactors, including pressure vessels and piping, reactor internals, nuclear fuel, and high temperature materials such as graphite. A master's degree in engineering or related field (may include a combination of experience obtained through an academic institution, e.g., design projects, research, or design teams, as well as professional experience) may be in lieu of two years of experience.
Manufacturing Optimization III Blue OriginManufacturing Optimization IIIWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Production Support- Production Scheduling, Theory of Constraints, Budgets and Forecasts, Crew Empowerment, Defect Analysis and Benchmarking Analysis, Core Competency Definition, Resource Allocation, Scenario Planning, Discrete Event Simulation, Make/Buy Evaluations, and Cost/Price Evaluations.