Food Safety Quality Assurance Technician - Veteran Pathway Tyson Foods IncFood Safety Quality Assurance Technician - Veteran PathwayWashington, WA$18–$32 / hourRelevant backgrounds may include (not required): Army: 92G (Culinary Specialist), 68S (Preventive Medicine Specialist), 74D (CBRN Specialist), 91 Series (Maintenance inspectors), 12 Series (Engineering - inspections/compliance). Tyson will develop an offer based on a candidate's or team member's relevant skills and capabilities, the market data for the role described in this requisition, internal equity, and other information relevant to the candidate and role.
Construction Quality Manager AtlasConstruction Quality ManagerRedmond, WA$120,000–$160,000 / yearAt Atlas, we're providing services that enable communities to flourish and thrive, and if you’re a Construction Quality Manager ready to lead project-specific quality efforts on major transportation, transit, water, aviation, and heavy civil infrastructure projects and are committed to doing meaningful work, then this is your moment. We trust our people to do great work and live fulfilling lives, and we provide resources that care for our people, both at work and in life: Health & Wellness: We offer medical, dental and vision coverage with multiple plan options, including no-cost employee-only medical coverage.
Construction Quality Manager Atlas Technical Consultants IncConstruction Quality ManagerSeattle, WA$120,000–$160,000 / yearAt Atlas, we're providing services that enable communities to flourish and thrive, and if youre a Construction Quality Manager ready to lead project-specific quality efforts on major transportation, transit, water, aviation, and heavy civil infrastructure projects and are committed to doing meaningful work, then this is your moment. We trust our people to do great work and live fulfilling lives, and we provide resources that care for our people, both at work and in life: Health & Wellness: We offer medical, dental and vision coverage with multiple plan options, including no-cost employee-only medical coverage.
Director, Design Quality Blue Origin Enterprises LPDirector, Design QualitySeattle, WA$203,165–$284,430.30 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Technician, Quality Inspection KBR IncTechnician, Quality InspectionRedmond, WA$26–$32 / hourQuality Inspector - Aerospace Source Inspection: In this role, the Quality Inspector will perform source inspections at supplier manufacturing facilities to ensure compliance with customer, contractual, and quality system requirements for aerospace and electronic components. The ideal candidate will possess strong technical inspection experience, professionalism in customer and supplier interactions, and the ability to work independently with minimal supervision.
Quality Technician - Incoming Inspection (Day Shift) EchodyneQuality Technician - Incoming Inspection (Day Shift)Kirkland, WA$25–$37.70 / hourThe Quality Technician II/III- Incoming Inspection is based at Echodyne's Woodinville facility and is responsible for the inspection and acceptance of supplier-provided printed circuit boards (PCBs), printed circuit board assemblies (PCBAs), electronic components, cable assemblies, mechanical components, fabricated parts, and electromechanical assemblies. Inspect PCBA workmanship to the applicable product acceptance class, including solder joints, component presence and placement, orientation and polarity, lead condition, board condition, cleanliness, markings, hardware, conformal coating, and approved rework or repair when applicable.
Senior Python Developer ArchKey Solutions LLCSenior Python DeveloperFenton, MOFull timePromotes and models the Company mission, vision and values through exercising sound and ethical business practices, championing all elements of diversity, equity, and inclusion (DEI) and providing high quality services and programs as they relate to clients, subcontractors, co-workers, suppliers, and the public. Experience with relational databases (PostgreSQL, MySQL, SQL Server) and NoSQL databases (MongoDB, Redis).
Quality Technician - Incoming Inspection Day Shift Echodyne CorpQuality Technician - Incoming Inspection Day ShiftKirkland, WA$25–$37.70 / hourThe Quality Technician II/III - Incoming Inspection is based at Echodyne''s Woodinville facility and is responsible for the inspection and acceptance of supplier-provided printed circuit boards (PCBs), printed circuit board assemblies (PCBAs), electronic components, cable assemblies, mechanical components, fabricated parts, and electromechanical assemblies. Inspect PCBA workmanship to the applicable product acceptance class, including solder joints, component presence and placement, orientation and polarity, lead condition, board condition, cleanliness, markings, hardware, conformal coating, and approved rework or repair when applicable.
Quality Technician – Incoming Inspection (Day Shift) Echodyne CorpQuality Technician – Incoming Inspection (Day Shift)Kirkland, WA$25–$37.70 / hourThe Quality Technician II/III - Incoming Inspection is based at Echodyne's Woodinville facility and is responsible for the inspection and acceptance of supplier-provided printed circuit boards (PCBs), printed circuit board assemblies (PCBAs), electronic components, cable assemblies, mechanical components, fabricated parts, and electromechanical assemblies. Inspect PCBA workmanship to the applicable product acceptance class, including solder joints, component presence and placement, orientation and polarity, lead condition, board condition, cleanliness, markings, hardware, conformal coating, and approved rework or repair when applicable.
Assembler Installer Cable Controlled Systems B - 30204 BoeingAssembler Installer Cable Controlled Systems B - 30204Renton, Washington$24.32–$53.30 / hourThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Controls Technician Data Center Facilities PkazaControls Technician Data Center FacilitiesSumner, WAA fully competent Data Center Onsite Controls Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center environment - testing and operations. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and other Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions.
Quality Assurance Specialist B.E. Meyers & Co IncQuality Assurance SpecialistRedmond, WAIs responsible for conducting incoming receiving inspections to IPC-A-610 class 3. Performs first article inspections (FAI) to AS9100, line inspections, finished goods and pack out inspections and audits on electronic, mechanical, and optic systems, subassemblies, and parts to ensure said items meet critical specifications. Understands and follows inspection plans, work orders, test manuals, performance specifications, wiring diagrams, shop drawing prints and schematics to determine, validate or comply with specification, testing procedure and equipment to be used.
Global Head, Vaccine Chemistry, Manufacturing and Controls (CMC), Center for Vaccine Innovation and Access (CVIA) PATHGlobal Head, Vaccine Chemistry, Manufacturing and Controls (CMC), Center for Vaccine Innovation and Access (CVIA)Seattle, WA$320,000–$380,000 / yearProvide strategic and technical guidance to CMC team members on project teams on process development, product analytics, formulation and fill, final manufacturing process and facility design and needs, and quality control thereof, investigational product supply and stability, as well as in vivo and in vitro safety and toxicity testing performed before and during the clinical development to demonstrate non-clinical safety and tolerability of candidate vaccine products. The Global Head of CMC is a member of the CVIA leadership team (CVIA LT) and is responsible for CVIA-wide business plan creation and implementation, change initiative leadership, talent management, and proactive partnership in developing comprehensive cross-disciplinary tactics and enabling exceptional execution through cross-functional collaboration.
Automation & Controls Engineer, Solar Starlink Space Exploration Technologies CorpAutomation & Controls Engineer, Solar StarlinkRedmond, WA$100,000–$117,500 / yearSoftware: PLC programming, preferably Beckhoff TwinCAT structured text, state machines, applying Object Oriented Programming to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, etc. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewAutomation & Controls Engineer Starlink Space Exploration Technologies CorpAutomation & Controls Engineer StarlinkRedmond, WA$100,000–$135,000 / yearSoftware: PLC programming, preferably Beckhoff TwinCAT structured text, state machines, applying Object Oriented Programming to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, etc. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Construction Cost Control Engineer JLM Strategic Talent PartnersConstruction Cost Control EngineerRedmond, Washington$35–$55 / hourAs the industry leader in staffing for architecture, engineering, and construction projects, JLM has 18,500+ pre-vetted, highly-skilled, and available people ready to power your project within 7 days. We accomplish this by sourcing & vetting high level career seeking candidates in the industry and match them with our partners current open roles.
Quality Assurance Specialist B.E. Meyers & Co., Inc.Quality Assurance SpecialistRedmond, WAIs responsible for conducting incoming receiving inspections to IPC-A-610 class 3. Performs first article inspections (FAI) to AS9100, line inspections, finished goods and pack out inspections and audits on electronic, mechanical, and optic systems, subassemblies, and parts to ensure said items meet critical specifications. Understands and follows inspection plans, work orders, test manuals, performance specifications, wiring diagrams, shop drawing prints and schematics to determine, validate or comply with specification, testing procedure and equipment to be used.
Quality Testing Supervisor (QTS) Kleinfelder, Inc.Quality Testing Supervisor (QTS)Redmond, WAFull timeThis applicant will engage local staff to execute a Construction Quality Services business plan, provide consistent, high quality, professional Construction Materials Engineering and Testing (CoMET) and construction support services in accordance with Kleinfelder guidance principles (mission, vision, values) and commensurate with expectations established for quality, risk management, profitability, client service, safety, and timely delivery. From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories.
Controls Engineer Apex Staffing GroupControls EngineerTacoma, WashingtonMust have experience in industrial electrical design, PLC programming, HMI software design, industrial networking, MCC hardware/software configuration, and Closed-Loop Servo control. Analyze engineering sketches, specifications, drawings and related data to determine electrical, hydraulic, pneumatic, motion and control components for mechanical equipment.
Instrumentation & Controls / Industrial Automation Engineer Stantec IncInstrumentation & Controls / Industrial Automation EngineerBellevue, WALead the design and development of the gamut of I&C construction drawing deliverables including but not limited to loop and I/O diagrams, wiring diagrams, instrument installation drawings, control panel GAs, E&I equipment layouts, wiring/termination diagrams for industrial and mine facilities collaboratively with designers / drafters locally or remotely. Primary Location: United States | AZ | Phoenix Other Locations: United States | WA | Bellevue Organization: 2554 E&R-US Delivery Center-Phoenix AZ Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 23/07/2026 04:07:35 Req ID: 1006889.