UNKNOWN

FEED

Performs routine or special maintenance inspections to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulics systems, plumbing, precision assemblies, rigging and controls etc. Decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.

POSITION SUMMARYLocation: Macon, GA  Performs routine or special maintenance inspections to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulics systems, plumbing, precision assemblies, rigging and controls etc.JOB RESPONSIBILITIES<ul><li>Determines when a component should be repaired or replaced.</li><li>Direct and oversee Crew.</li><li>Task Card time management.</li><li>Decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.</li><li>Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.</li><li>Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM's) technical data, and work package instructions.</li><li>Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances. Consults with the Project Manager if technical assistance is needed during the repair process.</li><li>Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.</li><li>Completes work package documentation by signing/stamping off after finishing all designated operations.</li><li>May submit completed/in progress work to Project Manager for review; submits to Quality Control for final/in progress inspection and re-certification of airworthiness.</li><li>Provides Project Manager with performance statistics and other operational data, as requested.</li><li>Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.</li></ul>ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIESEducation:High School/GEDA & P LicenseExperience:<ul><li>A minimum of 2 years' experience in a leadership role is preferred</li><li>Journeyman Technician Role requiring Intermediate Skills to perform most of the standard tasks within the technical area assigned to.</li><li>Minimum of 5 years' experience in at least one aircraft type.</li><li>Mastery in at least one aircraft discipline should be demonstrated through prior work experience to include:<ul><li>General Maintenance</li><li>Structures</li><li>Interiors</li><li>Avionics Systems</li></ul></li><li>Proficiency with interpretation of original equipment manufacturer's technical data or work package instructions; experience using power or pneumatic hand tools.</li></ul>Knowledge, Skills & Abilities:<ul><li>Strong Communications skills</li><li>Follows approved maintenance procedures.</li><li>Microsoft Office skills (Excel, Word).</li><li>Ability to read work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.</li><li>Knowledge of machines and tools, including their designs, uses, repair, and maintenance.</li><li>Be proficient in the usage of air powered hand tools and related equipment.</li><li>Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.</li></ul>Working Conditions / Environment/ Special Requirements<ul><li>Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.</li><li>Ability to work flexible hours and different shifts if required.</li><li>Employees will be subject to the random drug and alcohol testing under FAA regulations.</li><li>The Lead Technician will be properly certificated in accordance with either FAR 65 Subpart D or Subpart E.</li><li>Tools must satisfy minimum tool list.</li><li>Valid Drivers' License.</li><li>Must be able to work in hot/Cold – Indoor/Outdoor.</li><li>Must be able to lift up to 50 lbs unassisted.</li><li>Must be able to do work above head.</li><li>Must be able to work at heights.</li><li>Must be able to work in confined spaces.</li><li>Must be able to climb.</li></ul>GENERAL COMMITMENT FOR ALL EMPLOYEES<ul><li>Commitment to company values and complies with department norms, policies, directives, and procedures.</li><li>Incorporates Lean and P3E processes and concepts into daily activities.</li><li>Strive for continuous improvement to processes and procedures.</li><li>Honors and protects confidential and proprietary documents and information.</li><li>Satisfies work schedule requirements.</li><li>The job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required by the employee. Performs other duties as assigned.</li></ul>Embraer is an equal employment opportunity employer.

Embraer

Lead A&P Technician

A & P Certificate

Aircraft Maintenance

Avionics

Blueprints

Communication Skills

Consulting

Continuous Improvement

Corporate Policies

Cost Control

Distribution Services

Documentation

Driver's License

Environmental Protection Agency (EPA)

Federal Aviation Administration (FAA)

Federal Laws and Regulations

Hand Tools

Hydraulic Engineering

Leadership

Lift/Move 50 Pounds

Machine Tool

Maintenance Services

Microsoft Excel

Microsoft Office

Microsoft Word

OEM (Original Equipment Manufacturer)

OSHA

Plumbing

Pneumatic Tools

Procedure Development

Project/Program Management

Quality Control

Regulatory Requirements

Safety/Work Safety

Secondary School

Standard Operating Procedures (SOP)

State Laws and Regulations

Statistics

System Test

Technical Support

Test Equipment

Testing

Time Management

BreezyHR

OTHER

Overview: Apogee has an opportunity for a Systems Engineer to provide contractor site reachback support for the M-Code Aviation Receivers Joint Program Office (MAR JPO). These positions provide senior-level technical support in specialized areas, including Test & Evaluation, Avionics Integration, and Cybersecurity.

Overview:
Apogee has an opportunity for a Systems Engineer to provide contractor site reachback support for the M-Code Aviation Receivers Joint Program Office (MAR JPO). These positions provide senior-level technical support in specialized areas, including Test & Evaluation, Avionics Integration, and Cybersecurity. These are full-time remote positions with occasional travel to government sites.  

Responsibilities:
Technical Support:Provide senior technical support in specialized areas:<ul><li>Test & Evaluation</li><li>Avionics Integration</li><li>Cybersecurity  <ul><li>Support Studies & Analysis (S&A) task execution </li><li>Conduct trade studies and technical analyses </li><li>Provide expert technical assessments and recommendations </li></ul></li></ul>Test & Evaluation (for T&E specialists):<ul><li>Support test planning and strategy development </li><li>Evaluate test approaches and methodologies </li><li>Review test plans and procedures • Analyze test results and provide assessments </li><li>APDP T&E Level III certified or military T&E school graduate </li></ul>Avionics Integration (for Integration specialists):<ul><li>Support platform integration planning and analysis </li><li>Evaluate interface requirements and ICDs </li><li>Assess integration approaches and risks </li><li>Provide expertise on aircraft systems and interfaces </li><li>Direct involvement with 3+ aircraft platforms required </li></ul>Cybersecurity (for Cyber specialists):<ul><li>Support cybersecurity threat analysis and evaluation </li><li>Conduct vulnerability assessments </li><li>Evaluate cybersecurity testing approaches </li><li>Develop countermeasure recommendations </li><li>Technical knowledge of PNT systems security </li></ul>Studies & Analysis Support:<ul><li>Execute assigned S&A tasks </li><li>Conduct research and technical analysis </li><li>Prepare technical reports and documentation </li><li>Support trade studies and technology assessments </li></ul>

Qualifications:
Minimum Experience:Citizenship: Must be a US citizen  Clearance: Must have and be able to maintain a TS/SCI level clearance  Education: Bachelor's Degree in Engineering, or related field Years of Experience:20 years of experience in specialized areas Test & Evaluation:<ul><li>DT/OT experience</li><li>APDP T&E Level III or military T&E school</li></ul>Avionics Integration:<ul><li>Airborne integration, direct involvement with 3+ platforms</li></ul>Cybersecurity:<ul><li>Cybersecurity focused on PNT systems, threat evaluation, testing, and countermeasures</li></ul>Additional experience:<ul><li>Strong analytical and problem-solving skills </li><li>Excellent technical writing and communication skills </li><li>Ability to work independently and meet deadlines</li></ul>Preferred Experience:Education: Master's Degree in Engineering, or related field Years of Experience: 15 years of experience in specialized areas (Test & Evaluation, Avionics Integration, Cybersecurity) Additional Information: Location: Contractor Site (National - Remote) Remote: This is a full-time remote positionTravel: Travel up to 20% may be required, per the customer's discretion

Avionics Jobs in Warner Robins, GA

Resume Resources

Get noticed by top employers!

Avionics Jobs in Warner Robins, GA

Lead A&P Technician Embraer

Systems Engineer Apogee Engineering, LLC

Resume Resources