Technician - Assembly & Integration II Blue OriginTechnician - Assembly & Integration IIWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Aviation Electrical Technician ManTech International CorpAviation Electrical TechnicianPanama City Beach, FLThis work supports the U.S. Navy Landing Craft and Air Cushion Connector Ship-to- Shore (LCAC SSC) Legacy at the Naval Surface Warfare Center (NSWC) as part of a depot repair, refurbishment, craft operation and maintenance team. Responsibilities include but are not limited to: Assemble and install equipment requiring simple wiring, soldering, or connecting electrical components while following detailed procedures to include replacement of components and wiring circuits.
Manufacturing Engineering Technician Metasys TechnologiesManufacturing Engineering TechnicianLos Angeles, CA$49,920–$54,080 / yearThey will likely have an associate degree in electrical engineering, electronics engineering technology, or a related discipline, although a recent BSEE graduate with practical manufacturing experience would also be a strong fit. They should have approximately one to three years of experience in an electronics manufacturing environment, such as PCB/PCBA assembly, SMT, aerospace electronics, medical devices, avionics, or contract manufacturing.
Technician-Electronic-Level 3 Honeywell Aerospace Inc.Technician-Electronic-Level 3Olathe, KSAll applicants for placement in DOT/FAA safety-sensitive positions will be required to submit to a pre-employment drug test, testing for Marijuana, Cocaine, Amphetamines (amphetamine, methamphetamine, MDMA, MDA), Phencyclidine (PCP), and Opioids (codeine, heroin, morphine, oxycodone, oxymorphone, hydrocodone, hydromorphone). Our systems are on board 90% of the world's aircraft - serving commercial aviation, defense and space operators from integrated flight deck platforms with 30-plus years in service to radiation-hardened systems trusted for human spaceflight.
Technician - Assembly & Integration | All Shifts All Levels Blue Origin Enterprises LPTechnician - Assembly & Integration | All Shifts All LevelsWA$24.74–$34.63 / hourand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Experienced Manufacturing Technician - 3rd Shift Honeywell AerospaceExperienced Manufacturing Technician - 3rd ShiftMinneapolis, MNYou will work under direct supervision and alongside some of the world's most talented chemists to develop and optimize chemical formulations, conduct experiments, and collaborate with cross-functional teams to ensure successful product development of Honeywell's next generation of products. Our systems are on board 90% of the world''s aircraft - serving commercial aviation, defense and space operators from integrated flight deck platforms with 30-plus years in service to radiation-hardened systems trusted for human spaceflight.
Avionics A&P Technician Ascent Global LogisticsAvionics A&P TechnicianBelleville, MichiganSuccessful candidates must pass an initial, and random, Drug and Alcohol screening process as required by the Federal Aviation Administration (FAA), and a fingerprint based criminal history records check and/or Security Threat Assessment (STA) as required by the Transportation Security Administration (TSA). After completion of an assigned task, the Avionics Technician will annotate all work accomplished, and when necessary, notify the Lead Avionics Technician or USA Jet Inspection Department (as applicable) when the work performed requires inspection sign-off.
Lead Manufacturing Technician Honeywell Aerospace Inc.Lead Manufacturing TechnicianMinneapolis, MN$85,000–$110,000 / yearOur systems are on board 90% of the world's aircraft - serving commercial aviation, defense and space operators from integrated flight deck platforms with 30-plus years in service to radiation-hardened systems trusted for human spaceflight. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space - from engines and cockpit electronics to cabin systems, mechanical components and connectivity solutions.
Semiconductor Technician - IC Wafer Fab, Weekend Honeywell Aerospace Inc.Semiconductor Technician - IC Wafer Fab, WeekendPlymouth, MN$68,000–$84,000 / yearOur new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution.
Simulator Technician II CAE IncSimulator Technician IIOrlando, FLAs part of the Technical Services department within CAE's Civil Training and Services division, you will perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center in Orlando, FL. 4 years of related experience in electronics, avionics, automated systems, computer networking, troubleshooting, or repair.
Fixed Wing Avionics Technician CBA - TPS V2X IncFixed Wing Avionics Technician CBA - TPSPatuxent River, MDUses complex test equipment such as continuous wave and pulse generators, time domain reflectometers, multi-trace oscilloscopes, frequency counters, multi-meters and deviation meters, and specialized test equipment to perform operational checks. Performs calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents.
Calibration Technician (ALL LEVELS) Transcat, Inc.Calibration Technician (ALL LEVELS)Somerset, Pennsylvania$22–$38 / hourWith over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. PMEL (Precision Measurement Equipment Laboratory) or TMDE (Test Measurement Diagnostic Equipment) training + military experience in the calibration field plus 2+ years civilian experience preferred.
Electrical Technician Observable SpaceElectrical TechnicianLos Angeles, CaliforniaAssemble, integrate, and wire electrical and electronic components, including circuit boards, harnesses, sensors, power supplies, and control systems, for ground and flight hardware. Observable Space is backed by top-tier institutional investors including Lux Capital, Upfront Ventures, RTX Ventures, Detroit Venture Partners and Embedded Ventures.
Simulator Technician III CAE IncSimulator Technician IIIOrlando, FLAs part of the Technical Services department within CAE's Civil Training and Services division, you will perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Orlando Hanger Blvd Training Center. Knowledge of simulator computer configurations (Host, Rehost, Visual, IOS) and experience maintaining simulator networks.
Avionics Technician SEGULA TechnologiesAvionics TechnicianWichita, KSOwn and maintain hand tools with the ability to demonstrate inventory and control of tools Read and understand electrical engineering drawings. Repair, modify and service aircraft avionics, electrical and electronic equipment with limited supervision.
Senior Electrical Test Technician, Air Dominance and Strike Anduril Industries IncSenior Electrical Test Technician, Air Dominance and StrikeCosta Mesa, CA$47–$62 / hourWorking across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril''s next-generation autonomous air platforms to operate in complex and contested environments. To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process.
Engineering Test Technician GE Aerospace.Engineering Test TechnicianGrand Rapids, MIAssociate degree in Electrical Engineering/Electronics Technology, an Electronic Technician certificate, or a high school diploma/GED with at least 5 years of related electronics testing experience or relevant military experience. You will work closely with design engineering teams to resolve hardware issues, verify performance against drawings and specifications, and help ensure reliable, high-quality products for aerospace applications.
Interim Aircraft Maintenance Technician- RW Global Medical Response IncInterim Aircraft Maintenance Technician- RWElko, NV$75,025–$108,752 / yearAircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures.
Avionics / Aircraft Electrical Systems Technician 3 Gulfstream Aerospace CorporationAvionics / Aircraft Electrical Systems Technician 3Palm Beach, FLOther Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Position Purpose: Provides technical expertise while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft.
Military DoD SkillBridge Program - Engineering Technician GE Aerospace.Military DoD SkillBridge Program - Engineering TechnicianGrand Rapids, MISeparating Service members can be granted up to 180 days of permissive duty to focus solely on training full-time with approved industry partners after unit commander (first O-4/Field Grade commander in chain of command) provides written authorization and approval. Ideal for transitioning military talent with electronics test, diagnostics, avionics, or communications maintenance experience who are comfortable following technical procedures, using sophisticated test equipment, troubleshooting to the component level, and documenting results in quality systems.