Biomedical Equipment Technician III Trinity Global ConsultingBiomedical Equipment Technician IIITravis Air Force Base, CAMinimum/General Experience: 10 years of field experience (minimum of four years as a level II BMET) in managing: initial inspections, calibrations, diagnostics, maintenance, life cycle management, repair of medical equipment, equipment acquisition, and safety within OEM guidance and local/state/federal regulations. Initial inspections, calibrations, diagnostics, general maintenance, and repair of medical and non-medical general support equipment (medical package tools and equipment, i.e. generators, environmental control units, etc.).
Biomedical Equipment Technican Workforce Solutions Virens GlobalBiomedical Equipment TechnicanRancho Cordova, CaliforniaProvide Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service, to general and specialized medical equipment's as assigned by Clinical Engineering (CE) Manager. Responsibilities include: Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electrical, mechanical, pneumatic, hydraulic sciences.
Regional Biomedical Technician CbRegional Biomedical TechnicianSacramento, California$60,000–$70,000 / yearJob Description: The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.
Regional Biomedical Technician EVN Dialysis Center LLCRegional Biomedical TechnicianSacramento, CAFull timeJob Description: The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s). Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.
Manufacturing Engineer II - Equipment Penumbra IncManufacturing Engineer II - EquipmentRoseville, CA$82,000–$108,000 / yearMinimum education and experience: Bachelor's degree in Mechanical, Biomedical, Electrical, Chemical, Materials, Industrial Engineering, or related degree, with 1+ years relevant engineering experience, or an equivalent combination of demonstrated performance, education, and experience. Area of work involves manufacturing processes with interaction between production and cross-departmental engineering groups in resolving problems encountered on the production floor and across the business.
Manufacturing Engineer II - Equipment Penumbra Inc.Manufacturing Engineer II - EquipmentRoseville, CA$82,000–$108,000 / yearMinimum education and experience: Bachelor's degree in Mechanical, Biomedical, Electrical, Chemical, Materials, Industrial Engineering, or related degree, with 1+ years relevant engineering experience, or an equivalent combination of demonstrated performance, education, and experience. Area of work involves manufacturing processes with interaction between production and cross-departmental engineering groups in resolving problems encountered on the production floor and across the business.
Biomed Technician 1 - Sacramento GE HealthCare Technologies IncBiomed Technician 1 - SacramentoSacramento, CA$68,000–$121,000 / yearQualifications: Associate''s or Bachelor''s degree in Electrical Engineering, Biomedical Engineering, Mechanical Engineering, or related field; OR equivalent military education; OR participant in the formal GEHC Biomed/FE Services Internship or Military Externship program; OR High School Diploma/GED and 2+ years of experience servicing electrical, electronics, IT or mechanical equipment. In addition, during employment, the employee must comply with all customer access policies, including but not limited to obtaining and/or providing proof of required immunizations, and additional drug tests or background checks (including a federal government background check if assigned to support a contract with the federal government).
NewInstrument Technician III *PC 113 Miltenyi Biotec GmbHInstrument Technician III *PC 113Auburn, CA$25–$29 / hourAssignments are completed by following technical documents and implementing technical and mechanical troubleshooting and fault-finding methodologies to repair, review, QC test and file reports for new and internal use instruments in an in-house factory service center. These developments have led to cutting-edge cell and gene therapies - transformative methods that mobilize the body's own cells and genetic blueprint to tackle diseases such as cancer and autoimmune conditions.
NewInstrument Technician III *PC 113 Miltenyi BiotecInstrument Technician III *PC 113Auburn, California$25–$29 / hourAssignments are completed by following technical documents and implementing technical and mechanical troubleshooting and fault-finding methodologies to repair, review, QC test and file reports for new and internal use instruments in an in-house factory service center. These developments have led to cutting-edge cell and gene therapies – transformative methods that mobilize the body’s own cells and genetic blueprint to tackle diseases such as cancer and autoimmune conditions.
Biomed Repair Technician (Monday-Friday) Med One GroupBiomed Repair Technician (Monday-Friday)Sacramento, CaliforniaAbout Med One Group: Med One Group, a trusted leader in medical equipment and healthcare financing for more than 25 years, is seeking a skilled and detail-oriented Biomed Repair Technician to join our team in Sacramento, CA. Assemble, clean, calibrate, troubleshoot, repair, and maintain a variety of medical equipment, including infusion pumps, patient monitors, ventilators, hospital beds, and bariatric beds.
Field Service Technician - San Jose, CA Getinge ABField Service Technician - San Jose, CASacramento, CAAs a Field Service Technician for Getinge, in our San Jose, CA area service territory, your primary mission will be to provide maintenance and repair services at customer establishments, following manufacturer's instructions and utilizing knowledge of mechanical, hydraulic, and electronic equipment. With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows.
Field Service Technician - San Jose, CA Getinge GroupField Service Technician - San Jose, CASacramento, CAAs a Field Service Technician for Getinge, in our San Jose, CA area service territory, your primary mission will be to provide maintenance and repair services at customer establishments, following manufacturer's instructions and utilizing knowledge of mechanical, hydraulic, and electronic equipment. With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows.
Clinical Engineering Medical Device Security Engineer CommonSpirit HealthClinical Engineering Medical Device Security EngineerRancho Cordova, CAAs one of the nation's largest nonprofit Catholic healthcare organizations, CommonSpirit Health delivers more than 20 million patient encounters annually through more than 2,300 clinics, care sites and 137 hospital-based locations, in addition to its home-based services and virtual care offerings. We are seeking a proactive and detail-oriented engineer with a proven ability to collaborate effectively, troubleshoot complex technical issues, and develop robust solutions that protect critical healthcare infrastructure and ensure continuous patient care.
Aseptic Process Engineer Nivagen PharmaceuticalsAseptic Process EngineerSacramento, CaliforniaProvide process engineering support for aseptic processing equipment, including isolators, Restricted Access Barrier Systems, filling lines, pumps, filtration systems, stopper/cap handling systems, bag filling systems, and related support equipment. The Aseptic Process Engineer partners with Manufacturing, Quality Assurance, Validation, Engineering, Maintenance, Automation, Supply Chain, and Technical Operations to ensure aseptic processes are robust, compliant, efficient, and maintained in a state of control.
Site Manager Block Imaging International LLCSite ManagerSacramento, CA$90,000–$120,000 / yearLead and develop team members by setting clear direction, priorities, and expectations; providing regular feedback; and modeling organizational values to foster a healthy, trust-based culture of accountability and growth. Ability to safely operate and enter/exit vehicles, drive for extended periods and work in varied environmental conditions with potential exposure to machinery, noise, and hazardous materials.
Bmet 3- Modesto, CA GE Healthcare Technologies Inc.Bmet 3- Modesto, CASacramento, CA$79,120–$118,680 / yearQualifications: Associate's or Bachelor's degree in Electrical Engineering, Biomedical Engineering, Mechanical Engineering, or related field and 4+ years of experience servicing medical equipment; OR equivalent military education and 4+ years of experience servicing medical equipment; OR High School Diploma/GED and 6+ years of experience servicing medical equipment. May perform role of site leader (e.g., direct activities of fellow BMET's assigned to site, engage in a more interactive customer relationship, interact with customer leadership, participate in a Safety Committee).
BMET 3- Modesto, CA GE HealthCareBMET 3- Modesto, CASacramento, CaliforniaAssociate's or Bachelor's degree in Electrical Engineering, Biomedical Engineering, Mechanical Engineering, or related field and 4+ years of experience servicing medical equipment; OR equivalent military education and 4+ years of experience servicing medical equipment; OR High School Diploma/GED and 6+ years of experience servicing medical equipment. May perform role of site leader (e.g., direct activities of fellow BMET's assigned to site, engage in a more interactive customer relationship, interact with customer leadership, participate in a Safety Committee).
Facilities Maintenance Mechanic - Sacramento CA The Jackson LaboratoryFacilities Maintenance Mechanic - Sacramento CASacramento, CaliforniaPerforms preventive maintenance, adjustments, and basic repairs on piping and plumbing systems including fixtures, electric mechanicals, instrumentation, and automation equipment steam and process hot water systems including control and isolation valves, steam traps, heat exchangers, pumps, and associated equipment; process equipment including tunnel washers, rack washers, bottle washers, autoclaves, bedding dispensers and drying cabinets, water treatment systems, etc. The Jackson Laboratory is an independent, nonprofit biomedical research institution with a National Cancer Institute-designated Cancer Center and nearly 3,000 employees in locations across the United States (Maine, Connecticut, California), Japan and China.
Maintenance Mechanic III The Jackson LaboratoryMaintenance Mechanic IIISacramento, CA$27.18–$45.51 / hourKey Responsibilities & Essential Functions: Performs preventive maintenance, adjustments, and basic repairs on piping and plumbing systems including fixtures, water fountain, bathroom equipment; steam and process hot water systems including control and isolation valves, steam traps, heat exchangers, pumps, and associated equipment; process equipment including tunnel washers, rack washers, bottle washers, autoclaves, bedding dispensers and drying cabinets, water treatment systems, etc. About JAX: The Jackson Laboratory is an independent, nonprofit biomedical research institution with a National Cancer Institute-designated Cancer Center and nearly 3,000 employees in locations across the United States (Maine, Connecticut, California), Japan and China.
Manufacturing Engineer I - Metals Penumbra IncManufacturing Engineer I - MetalsRoseville, CA$72,000–$94,000 / yearArea of work involves manufacturing processes with interaction between production and cross-departmental engineering groups in resolving problems encountered on the production floor and across the business. Support production; Creating and maintaining product and process documentation; Monitor process and equipment performance and identify and implement process improvement activities to increase/optimize yield, efficiency, and/or throughput.