Computer Field Technician U.S. NavyComputer Field TechnicianSoddy Daisy, TNWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Aviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianVarnell, GAWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
NewTechnician/Maintenance Elite StaffingTechnician/MaintenanceChattanooga, TNBy submitting your application, you authorize Elite Staffing, Inc. to contact you using the contact information you have provided for employment-related activities via any method, including SMS, email, and phone calls, including through the use of automated technology, AI generative voice, and pre-recorded and/or artificial voice messages. The technician will work closely with Maintenance Technicians, Production Operators, and Maintenance Planner to ensure equipment lubrication schedules are completed accurately and equipment defects are identified and reported promptly.
NewHamilton County Facilities Technician Helen Ross McNabb CenterHamilton County Facilities TechnicianChattanooga, TNSummary of position : Performs general maintenance tasks, preventive maintenance on HVAC systems, logs and tracks helpdesk requests, and meets with vendors. Monitors and reports any facility items needing addressed, ceiling tiles replaced, lights out, trip hazards, or pest issues.
Part Time Maintenance Technician Asset LivingPart Time Maintenance TechnicianChattanooga, TN$23–$28 / hourin all directions, lifting and placing objects of 100+ lbs., communicate with others to exchange information, repeat motions that may include wrists, hands and/or fingers, operate machinery and power tools, operate motor vehicles and/or golf carts, assess the accuracy, neatness, and thoroughness of the work assigned, identify and inspect objects and areas, exposed to outdoor weather elements (wind, precipitation) including low and high temperatures and exposed to hazardous chemicals, and able to work overtime, weekends, night hours (on-call property emergencies). The employee is frequently required to ascend and descend ladders, stairs, ramps, step stools, etc., move self in different positions to accomplish tasks in various environments, including tight and confined spaces, traverse flat and uneven terrain, work in an overhead position and/or reaching, adjust or move objects of 100+ lbs.
NewUtility Mechanical Repair Technician Industrial Plating (Chattanooga)Utility Mechanical Repair TechnicianChattanooga, TNTechnician will be trained on company specific equipment including lathes, cylindrical grinders, dynamic balancing, chrome plating, and thermal spray, as well as additional machine tools. Established in 1963, Industrial Plating Company specializes in applying high performance coatings and remanufacturing industrial parts to enhance equipment performance across diverse industries.
NewBoiler Service Technician Combustion & Controls, LLCBoiler Service TechnicianChattanooga, TNRemoteJob Description Description: Location: Remote (North Alabama & North Mississippi, West Tennessee) We are seeking a Boiler Service Technician to provide installation, maintenance, troubleshooting, and repair services for customers throughout North Alabama, North Mississippi, and West Tennessee. We are building our team of Boiler Service Technicians to support service operations throughout Alabama, Mississippi, and Tennessee, with an emphasis on Gadsden, Huntsville, Decatur, Montgomery, and Mobile, Alabama; Jackson and Tupelo, Mississippi; and Jackson and Memphis, Tennessee.
NewIndustrial Maintenance Technician Automation Personnel ServicesIndustrial Maintenance TechnicianChattanooga, TNPay ra te Day shift: $25.00 per hour Night shift: $25.75 per hour Shifts and Schedules Day shift: 8:00am-8:00pm Night shift: 8:00pm-8:00am 2 days on-3 days off rotation (must be willing to work weekend rotation) Industrial Maintenance Technician Duties and Responsibilities • Maintain, repair, troubleshoot and upgrade equipment and facility, analyze equipment and operational problems for all equipment, and take corrective action to resolve mechanical/electrical and operational problems • Lubricate equipment and perform preventative maintenance checks as needed, and/or requested • Assist with change-over of equipment, as necessary to produce different products • Assist with clearing equipment jams (during production) and set aside products for inspection/rework • Assist with the installation of new equipment • Assist manager/supervisor troubleshooting with training new maintenance employees, when requested • Must be able to perform light electrical work including basic electrical trouble shooting with a volt/ohm meter and amp probe Industrial Maintenance Technician Skills and Qualifications • 3 years’ experience in a maintenance position • Previous experience on forklift and scissor lift • Read mechanical drawings • Some basic computer skills for inventory and equipment • High school diploma or equivalent required Benefits . Automation Personnel Services is a highly recognized staffing agency with over 30 years of experience in manufacturing and light-industrial staffing.
NewTraveling General Maintenance Technician Lane Valente IndustriesTraveling General Maintenance TechnicianNew Hope, TNElectrical replacement installation of light fixtures, switches and outlets, capable of basic data connections and able to diagnose minor electrical problems (licensed electricians encouraged to apply). Basic knowledge of the following skills: Plumbing replacement/installation of sinks, faucets, toilets and basic drainage and water lines (licensed plumbers encouraged to apply).
NewFacilities Maintenance Technician Enviremedial Services IncFacilities Maintenance TechnicianChattanooga, TNVacation - Effective immediately0-3 years of service: 80 Hours - 10 days each year4-5 years of service: 96 Hours - 12 days each year6+ years of service: 120 Hours - 15 days each yearSick Pay Max Accrual of 56 hours per year Accrual begins immediately upon hire. Position Overview:Performs a variety of skilled duties in one or more of the building trades, such as painting, carpentry, minor electrical, cement masonry, drywall or other recognized crafts for the purpose of maintaining, repairing or remodeling government-owned and operated buildings and facilities, to include H.V.A.C. and other mechanical systems.
NewData Center Technician - Dalton, GA CoreWeaveData Center Technician - Dalton, GADalton, GA$65,000–$83,000 / yearTo conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability.
NewMitigation Technician ServiceMaster by Twins 2996Mitigation TechnicianChattanooga, TNEmployees will be required to visit job sites, restoration projects, or commercial properties , which may involve exposure to hazardous environments that may require use of PPE including respirators, gloves, and protective suits. This role involves emergency response, damage assessment, equipment setup, demolition, monitoring drying progress, and ensuring work is completed according to.
NewSun Tan City- Part Time Lamp Technician and Maintenance Assistant Sun Tan City - Chaffin/Bruner GroupSun Tan City- Part Time Lamp Technician and Maintenance AssistantChattanooga, TNRESPONSIBILITIES: • Read weekly lamp change reports • Work with area technicians and complete lamp changes • Report to local warehouse and load appropriate lamps • Travel to appropriate salon(s) and complete lamp changes • While at salons perform all necessary cleaning to the individual tanning bed • Log and record all lamp changes in Woven • Remove and discard all trash compiled during lamp changes • Record hours worked and travel logs into provided masters and return via email as outlined during training • Occasionally the job will require extra duties – i.e. –replacing single lamp outages, doing versa PM’s, replacing accent lights, etc. JOB REQUIREMENTS: Required Qualifications: • Well Organized • Mechanically inclined • Ability to work early is a plus • Client/Customer Awareness • Excellent communications and public relations abilities • Proficient in Microsoft Excel, including knowledge of all related computer applications, with strong typing skills • Accurate and attentive to detail • Self-motivated • Clean driving record • High School degree.
NewCAD Technician I KomlineCAD Technician IHixson, TNThrough our combination of innovative design, cutting-edge manufacturing capabilities, and decades of industry experience, we consistently deliver the highest quality equipment from our integrated manufacturing facilities. The CAD Technician I is responsible for preparing, modifying, and maintaining product drawings and digital drawing libraries in support of manufacturing and customer projects.
NewMobile Automotive Technician - Budget Truck - FT Avis Budget GroupMobile Automotive Technician - Budget Truck - FTChattanooga, TN$24 / hourAbility to lift up to 50 pounds, continuously sit, stand, bend, reach, walk, kneel, get up and get down from a seated position, enter, exit, climb into, climb down from, and drive a variety of automobiles, cargo vans and box trucks in all weather conditions. Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel .
Electronics Technician U.S. NavyElectronics TechnicianRinggold, GAWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Aviation Electronics Technician U.S. NavyAviation Electronics TechnicianJasper, TNWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Information Systems Technician U.S. NavyInformation Systems TechnicianWalden, TNKey Responsibilities As an Information Systems Technician, design, operate, secure, and restore networks, servers, and communication systems that support naval operations; as a Cryptologic Technician Networks specialist, conduct offensive and defensive cyber operations, investigate and track adversary activity, and help protect Navy networks and critical systems; as an Intelligence Specialist, collect and analyze information on adversaries, environments, and weather and create intelligence products and briefings for commanders. Pathways, Training & Advancement Recruit Training followed by Class A School in an information warfare specialty, such as IT or CTN at information warfare training sites and IS at intelligence training commands; advanced C schools and follow on training in areas such as cyber operations, network defense, digital forensics, signals analysis, targeting, imagery, language, and mission systems; progressive advancement based on qualifications, performance, and warfare pins such as Information Warfare and platform specific warfare designations.
DG0015 -- COMPUTER TECHNICIAN, CADASTRAL MindlanceDG0015 -- COMPUTER TECHNICIAN, CADASTRALChattanooga, TNReviews for completeness and accuracy maps and descriptions prepared by others and notes discrepancies to source of material being checked and recommends steps to rectify insufficiencies or makes additions and revisions. Production experience with Intergraph MicroStation, ESRI Arc/Info, Terramodel or similar computer-aided mapping software.
Computer Field Tech Position- Chattanooga TN BC Tech ProComputer Field Tech Position- Chattanooga TNChattanooga, TennesseeThis is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. You must be able to log into your tech portal every workday by 9 am to accept, code (update status), and map out your calls.