Crane Operator - 3rd Shift Tower International IncCrane Operator - 3rd ShiftMIn Assumes other duties as directed by supervisor\n \nThis Full-Time, Salary role is a part of our Autokiniton - Oakland team and reports to the Production Coordinator.\n \nRequired experience:\n \nEducation and/or Experience: \n \nHigh school Diploma or general education degree (GED); or one to three months related experience and /or training; or equivalent combination of education or experience.\n \nLanguage Skills: \n \nAbility to read and comprehend simple instructions, short correspondence, and memos. Learning and Development: We empower all our Associates \u2013 from entry-level to senior-level \u2013 with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON.\n \nAUTOKINITON Promotes a dynamic and collaborative work environment for everyone.\n \nAUTOKINITON is an equal-opportunity employer that is committed to diversity and inclusion in the workplace.
Crane Operator - 2nd Shift Tower International IncCrane Operator - 2nd ShiftMIn Assumes other duties as directed by supervisor\n \nThis Full-Time, Salary role is a part of our Autokiniton - Oakland team and reports to the Production Coordinator.\n \nRequired experience:\n \nEducation and/or Experience: \n \nHigh school Diploma or general education degree (GED); or one to three months related experience and /or training; or equivalent combination of education or experience.\n \nLanguage Skills: \n \nAbility to read and comprehend simple instructions, short correspondence, and memos. Learning and Development: We empower all our Associates \u2013 from entry-level to senior-level \u2013 with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON.\n \nAUTOKINITON Promotes a dynamic and collaborative work environment for everyone.\n \nAUTOKINITON is an equal-opportunity employer that is committed to diversity and inclusion in the workplace.
CDL Driver & Crane Operator SRS Distribution IncCDL Driver & Crane OperatorSterling Heights, MITravel Requirements: This role requires frequent travel within a 200-mile radius for material deliveries, with all trips starting and ending at the home branch-ensuring drivers return home daily with no overnight stays. • Proficient in operating commercial vehicles, cranes, forklifts, and conveyor systems Proficient in operating commercial vehicles, cranes, forklifts, and conveyor systems.
Crane Operator - 3rd Shift AutokinitonCrane Operator - 3rd ShiftBelleville, MIFull timeLearning and Development: We empower all our Associates – from entry-level to senior-level – with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON. High school Diploma or general education degree (GED); or one to three months related experience and /or training; or equivalent combination of education or experience.
Crane Operator - 2nd Shift AutokinitonCrane Operator - 2nd ShiftBelleville, MIFull timeLearning and Development: We empower all our Associates – from entry-level to senior-level – with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON. High school Diploma or general education degree (GED); or one to three months related experience and /or training; or equivalent combination of education or experience.
Certified Crane Operator (CCO) CA Hull Co IncCertified Crane Operator (CCO)Commerce Township, MISuch action shall include: employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship, pre-apprenticeship and/or on-the-job training. Hull employees enjoy amazing benefits including: Union health benefits Competitive wages On-the-job Training Career Development Award-Winning Safety Program Incentive Programs.
NewHeavy Press Operator AAMHeavy Press OperatorRoyal Oak, MichiganFormed through the acquisition of Dowlais Group plc and its subsidiaries - GKN Automotive and GKN Powder Metallurgy, Dauch unites deep engineering roots with global manufacturing capabilities and an entrepreneurial spirit to move mobility forward. Dauch Corporation is a premier Driveline and Metal Forming supplier serving the global automotive industry with a powertrain-agnostic product portfolio that supports electric, hybrid, and internal combustion vehicles.
Laser Operator Nesco Resource, LLCLaser OperatorClinton Twp, MI$20–$22 / yearThe Laser Operator is responsible for setting up, adjusting, and operating laser cutting machines to manufacture precision parts that meet strict customer quality and production specifications. Setup & Technical Execution: Retrieve programs and set up machines properly, including selecting the correct assist gases, nozzles, and cutting parameters.
Heavy Press Operator Dauch CorpHeavy Press OperatorRoyal Oak, MIAbout AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Candidates must be able to manage a fast paced schedule that includes full-time plant floor work and classes at Macomb Community College.
Steel Saw/Flow Operator I- Sterling Heights, MI Ellwood Group IncSteel Saw/Flow Operator I- Sterling Heights, MISterling Heights, MIThe Saw Operator I position receives, locates, stores, handles, and sets up predetermined material (steel or aluminum stock); Operates automatic saw equipment to accurately cut material (steel or aluminum stock) to customer specification; Ensures quality via quality check post cut. Ellwood Specialty Metals Company is the leading distributor and a fully-integrated producer of tool steels for plastic molds, die-cast and forging dies and other tooling applications.
Slitter Operator Tempered and Specialty MetalsSlitter OperatorSterling Heights, MIThe Slitter Operator is responsible for the overall productivity of the slitter line, with a goal of 95% efficiency and cross-trains the Slitter Helper at Tempered and Specialty Metals. Verify correct coils are supplied for processing by performing required confirmation checks and comparing tag information to ERP system schedule.
Injection Mold Production Operator Hi-Tech Mold & EngineeringInjection Mold Production OperatorRochester Hills, MIFull timeAny unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of Hi-Tech and Hi-Tech will have the right to hire that candidate without reservation – no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service. Candidates must be able to work in a manufacturing environment with loud machinery, oils and lubricants, cleaning supplies, power tools, overhead cranes and hi-lo traffic.
Laser Operator ResourceMFGLaser OperatorWarren, MI$20–$22 / hourSetting up, operating, and maintaining CNC laser cutting machines to precisely cut and shape materials. ResourceMFG is now hiring CNC Laser Operators for a steel production site in Warren, MI!
Saw Operator ResourceMFGSaw OperatorWarren, MIResourceMFG is now hiring Saw Operators for a steel production facility in Warren, MI! Previous experience operating a forklift; experience on a sit-down forklift is preferred.
Furnace Operator MNPFurnace OperatorUtica, MIFull timeAdditional benefits include a health clinic (onsite in Utica) for employees and their families; optional employee wellness activities include managing and tracking diabetes, blood pressure, and weight control; onsite, personalized retirement counseling; employee referral bonuses and employment of friends and families; access to tickets for Jimmy John's Field; volunteer opportunities include Gleaners, Suite Dreams, Veterans Support activities, Blessings in a Backpack, food and clothing drives, and others; employee recognition includes anniversaries, birthdays, and special events; employee discounts on autos, cell phones, and others; employee social activities include Detroit Tigers opening day, Fat Tuesday, ice cream/popsicles, picnics, team meetings, team outings, one-on-one with the president, and many more. It involves standing for long periods and performing repetitive tasks with exposure to oily conditions and dust, requiring the use of personal protective equipment (PPE) such as hearing protection, safety glasses, and appropriate footwear.
PRESS OPERATOR E & E MANUFACTURING COMPANY, INC.PRESS OPERATORPlymouth, MIThe operators are responsible for cleanliness and keeping press maintained, checking parts with calipers, and tools, setting up, loading and adjusting coil to produce parts to customer specification. Press Operator Role Description: The Press Operator will set up and operate press equipment to customer-supplied specifications while maintaining production by planning and organizing jobs and continuously monitoring quality.
Furnace Operator (6:00 AM-6:30 PM) Oerlikon Balzers Coatings USA Inc.Furnace Operator (6:00 AM-6:30 PM)Troy, MIFull timeHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Support activities associated with position include preparation and maintenance of the refractory furnace lining, maintenance of accurate production records, delivery of atomized product to the screening area, and cleaning the furnace and atomization system between alloys.
Saw Operator (Midnights) Livonia IntexSaw Operator (Midnights) LivoniaLivonia, MichiganExtrusion Saw Operators review work orders to prepare workflow. Verified correct cut length by using appropriate measuring tools.
Extrusion Saw Operator (midnight)-Livonia IntexExtrusion Saw Operator (midnight)-LivoniaLivonia, MichiganMust be willing to engage in self-learning keeping up with industry trends, safety, and company information, and training as needed. Perform all duties and responsibilities following all processes and procedures for accuracy and/or report any discrepancies or concerns to supervisor/department manager.
Cold Forming Header Operator - 2nd Shift Burgess Norton Mfg CoCold Forming Header Operator - 2nd ShiftBelleville, MIPart timeLoad material, draw material down to size, adjust tooling, verify machine settings based on production orders. • Measure and inspect parts during production using micrometers, calipers, gauges, and other precision instruments to ensure compliance with product specifications.
2nd Shift Material Handler/Machine Operator Alro Steel Corp2nd Shift Material Handler/Machine OperatorDetroit, MIOur material handlers work together, filling and preparing material orders for shipment to our customers, which includes operation of overhead cranes, forklifts, metal saws, shears, and lasers. About the company: Alro Steel Corporation supplies raw materials (carbon, stainless steel, aluminum and red metals) to a variety of manufacturing and other industries.
2nd Shift Waterjet Operator Alro Steel Corp2nd Shift Waterjet OperatorDetroit, MIOur material handlers work together, filling and preparing material orders for shipment to our customers, which includes operation of overhead cranes, forklifts, metal saws, shears, and lasers. About the company: Alro Steel Corporation supplies raw materials (carbon, stainless steel, aluminum and red metals) to a variety of manufacturing and other industries.
Line Operator Quaker Chemical CorpLine OperatorMIComplete visual inspections and quality checks before processing and alert Quality Personnel or Team Lead about damaged, dirty, or contaminated parts. Load and unload customer parts and/or baskets into the 110130140 line in a safe, timely, and efficient manner using a crane or hoist.
NewSaw Operator CAD Engineering ResourcesSaw OperatorNovi, MIYou would be loading the saw by crane or by hand with different types of material such as tubing, bar stock hot rolled and cold drawn material, round stock. You further acknowledge that providing false or fraudulent information during the application process is cause for denial of an offer, revocation of any existing offer, or other adverse action, up to and including termination after the start of your commencement of work.
Heavy Equipment Operator Cleveland-Cliffs IncHeavy Equipment OperatorDetroit, MILocation Detroit MIFerrous Processing and Trading FPT is one of North Americas premier processors buyers sellers and recyclers of scrap metals of all kinds and is a key supplier to the metals industry of North America. Pre-Employment background physical and hair drug screen requiredFerrous Processing and Trading is a subsidiary of Cleveland-Cliffs Inc. the largest flat-rolled steel company and the largest iron ore pellet producer in North America.
Machine Operator Apprentice 1 Lee Industrial ContractingMachine Operator Apprentice 1MIWork in permit & non-permit required confined spaces and in proximity to loud equipment Utilize and understand the constraints of chains, synthetic, metal mesh, and wire rope slings. Use & recognize rigging hardware including hooks, shackles, wire rope clips, clamps, eye bolts, softeners and tag lines.
Additive Cell Operator/Technician Lincoln Electric Holdings IncAdditive Cell Operator/TechnicianMIConduct full machine set-ups, loading build plates & sheets, adding wire, tip/machine calibrations insuring/maintaining proper print operation, loading and unloading of parts. Lincoln Electric's innovative solutions enable higher quality and productivity across a variety of processes including welding, cutting, brazing, machining, process automation, and field repair.
Heavy Equipment Operator GFL Environmental, IncHeavy Equipment OperatorPontiac, MichiganOperator will steer, guide and or drive the above listed equipment at the assigned site, if the equipment is used at the particular site(s) using steering wheel, shifters, levers, buttons and pedals. Working Conditions: • Constantly exposed to loud noise, humidity, outside weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles.
Heavy Equipment Operator CA Hull Co IncHeavy Equipment OperatorCommerce Township, MIOccasionally, the work requires the employee to walk, sit, stoop, kneel, crouch or crawl Works safely near and around highway traffic and noisy operations Ability to lift or carry up to 10 or 25 lbs., and occasionally up to 50 lbs. Such action shall include: employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship, pre-apprenticeship and/or on-the-job training.
Heavy Equipment Operator Fessler & Bowman IncHeavy Equipment OperatorMI3 years of experience with earthwork and civil construction • Willingness to learn and follow all safety policies and requirements • This position requires climbing kneeling bending and crawling often as well as the ability to work on ladders platforms and mechanical lifts • Must be able to understand English • Must be able to lift up to 75 lbs. Environments include but are not limited to the following: high low temperatures areas close to traffic loud and frequent noises confined spaces heights indoor outdoor settings.
Heavy Equipment Operator Instructor DETROIT TRAINING CENTER, INCHeavy Equipment Operator InstructorDetroit, MIThe instructor will be in charge of the cohort schedule, creation of in class projects, and the management of time to ensure that students graduate with the highest possible chances to succeed in the heavy equipment industry. Experience operating heavy machinery to include backhoe, skid steer, forklift, aerial lift, telehandler and excavator.
Heavy Equipment Operator (Haul Truck Driver/Utility) Detroit SaltHeavy Equipment Operator (Haul Truck Driver/Utility)Detroit, MichiganPerform basic conveyor, crusher, and screen deck maintenance and adjustments including but not limited to changing of idlers, screens, greasing of bearings, replacement of guarding, and clearing of dump chutes. The fruit of this labor is apparent in the salt city 1,200 feet beneath the city of Detroit, spanning more than 1,500 acres and containing over 100 miles of underground roads.
Lawn Care Specialist Nature's Trees, Inc.Lawn Care SpecialistTroy, MI$18–$25 / hourSavATree is hiring a landscape technician to apply knowledge of plants, trees, and grasses in growing, pruning, and fertilizing shrubs, lawns, bushes, trees, and flowers. Duties can include tree planting, transplanting, ensuring plants grow well in their assigned area as well as cleaning up debris around yards and other areas.
Welder | $21-$24/hr | Weekly Pay ES MFGWelder | $21-$24/hr | Weekly PayTroy, MI$21–$24 / hourWhether you specialize in MIG or TIG welding, you'll work on quality projects in a clean, safety-focused environment with opportunities to grow your career. If you're an experienced welder looking for steady work, competitive pay, and a company that values your skills, this is the opportunity you've been waiting for.
Supervisor, Operations - Material Handling Savage Services CorpSupervisor, Operations - Material HandlingDetroit, MIThis operation-embedded within the Marathon Refinery in Detroit, Michigan-serves our customer by providing highly skilled expertise in Petroleum Coke cutting, Coke handling, tractor-trailer loadout, and specialized equipment maintenance. The Operations Supervisor will provide support to the Operations Manager in scheduling and logistics; team member development; customer engagement; safety program implementation and adherence; and process and procedure execution at Savage's Detroit Handling operation.
NewPlant Health Care Specialist Nature's Trees, Inc.Plant Health Care SpecialistWaterford, MI$22–$28 / hourTeam & Collaborative Environment: Join a supportive team that works alongside some of the best trained and equipped professionals in the industry - with a focus on learning, growth, quality, and safety. You bring: A degree in Arboriculture, Urban Forestry, Horticulture, Plant Science, Plant Pathology, Environmental Sciences, Landscape Management, Turfgrass-or related experience (preferred).
Tree Climber Nature's Trees, Inc.Tree ClimberTroy, MI$20–$30 / hourTraining & Development: Hands-on training in all aspects of tree care, including pruning, removals, cable bracing, and equipment operation, with continuing education opportunities. This role offers the opportunity to work outdoors, visit beautiful properties in your community, and apply your climbing expertise to protect and enhance landscapes.
Welder I Certified Magna International, IncWelder I CertifiedTroy, MichiganThrough our robust product engineering, outstanding tooling capabilities and diverse process expertise, we continue to bring lightweight and innovative products to market. As part of our commitment to a fair, consistent, and efficient recruitment process, we may use artificial intelligence (AI) tools to assist in the initial screening of applications submitted through our Workday system.
Maintenance Technician ZekelmanMaintenance TechnicianPlymouth, MichiganWe seek to continuously advance the skills and opportunities of our employees, utilizing the latest technology and management tools available to consistently increase profitability and the enterprise value of Zekelman Industries and of our customers. This position is ideal for individuals with a strong electrical aptitude, excellent troubleshooting skills, and the ability to identify and resolve both electrical and mechanical issues.
Die Setter Magna International, IncDie SetterSterling Heights, MichiganSupport and participate in division and department improvement initiatives through Continuous Improvement Suggestion Program, and sharing of knowledge, ideas, and/or best practices with co-workers. 2-3 years of die setting experience with metal stamping dies, including progressive, transfer and line dies.
Production Supervisor OC Oerlikon Corporation AGProduction SupervisorPlymouth, MIHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The perks and benefits of working at Oerlikon include the following: Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong.
Factory Technician - (BANDSAW Experience WANTED!) Nox MetalsFactory Technician - (BANDSAW Experience WANTED!)Detroit, MichiganNOX Metals is a technology company in Detroit supplying aluminum plate, bar, and rounds to aerospace and defense manufacturers. - Operate industrial bandsaws to cut aluminum plate, bar, and rounds to customer spec.
Metal Stamping Die Setup Technician Specialized Talent Acquisition Recruiting Team (START)Metal Stamping Die Setup TechnicianShelby Twp, MIYour first stop is the next scheduled changeover: you set and troubleshoot die tooling on production equipment so stamping operators can run safely and efficiently. Quick die changeovers are routine for you, and you handle coil loading on presses up to 1,000 tons with confidence.
Maintenance Technician Cooper-Standard Holdings IncMaintenance TechnicianLivonia, MIBecause we recognize and value the range of ways in which people acquire experiences, whether via personal, professional, education, or volunteerism, we invite interested applicants to evaluate the key duties and requirements and apply for any opportunities that fit your experience and qualifications. Primary Responsibilities: • Diagnose malfunctions using testing devices and repair machinery with hand tools and precision instruments.
Injection Mold Tech - 2nd or 3rd shift Cooper-Standard Holdings IncInjection Mold Tech - 2nd or 3rd shiftMIBecause we recognize and value the range of ways in which people acquire experiences, whether via personal, professional, education, or volunteerism, we invite interested applicants to evaluate the key duties and requirements and apply for any opportunities that fit your experience and qualifications. • Set-up/tear down (changeover and process injection mold tooling and equipment per the job book and per the PC&L molding press schedule.
General Laborer Cleveland-Cliffs IncGeneral LaborerDetroit, MICleveland-Cliffs is vertically integrated from mined raw materials direct reduced iron and ferrous scrap to primary steelmaking and downstream finishing stamping tooling and tubing. Koil is a subsidiary of Cleveland-Cliffs Inc. the largest flat-rolled steel company and the largest iron ore pellet producer in North America.
Operating Engineer Level 4 DTE Energy CoOperating Engineer Level 4Detroit, MIKnowledge of power plant mechanical and electrical equipment, including chillers, motors, pumps, water treatment systems, electrical distribution, control systems, etc., and associated maintenance functions preferred. It is not intended as an all-inclusive list of accountabilities or responsibilities, nor is it intended to limit the rights of supervisors or management representatives to assign, direct and control the work of employees under their supervision.
NewSenior Advanced Manufacturing (Maintenance) Engineer Yanfeng International Automotive Technology Co LtdSenior Advanced Manufacturing (Maintenance) EngineerNovi, MIAdditional Responsibilities: Supports NA operations as tasks and projects are assigned by manager to lead or aid in the install and launch of new programs equipment in plants in NA and NA operations plant recovery support. Performs plant maintenance audits to ensure that all YF plant maintenance departments are operating as efficiently as possible, staffing is adequate, and maintenance is being performed correctly on the YF equipment by the plant maintenance teams.
General Production Dauch CorpGeneral ProductionTroy, MIFormed through the acquisition of Dowlais Group plc and its subsidiaries - GKN Automotive and GKN Powder Metallurgy, Dauch unites deep engineering roots with global manufacturing capabilities and an entrepreneurial spirit to move mobility forward. About Dauch: Dauch Corporation is a premier Driveline and Metal Forming supplier serving the global automotive industry with a powertrain-agnostic product portfolio that supports electric, hybrid, and internal combustion vehicles.